Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 2 Oct 2002 02:26:20 +0200
From:      Alexander Langer <alex@big.endian.de>
To:        current@FreeBSD.org
Subject:   kernel boot messages absent
Message-ID:  <20021002002620.GJ85009@fump.kawo2.rwth-aachen.de>

next in thread | raw e-mail | index | archive | help
Hi!

Can anyone explain me why with a recent kernel (last kernel was from
1 year ago) the kernel boot messages disappear from the monitor 
once the "propellor" of the kernel boot has done like 5 rounds
(last message is the last line of the
"Booting kernel in X seconds" line, followed by a single "-" on
the line, which used to be the propellor)

It seems a bit like the kernel is thinking it boots from
a serial console (not tried due to the lack of a serial cable, though).

However, once the getty is started, the login prompt is shown on
the monitor as it should.

I've tried to tell the loader in loader.conf that console="vidconsole",
but it doesn't help.  Note that the loader itself is visible.

This is the dmesg from boot -v.  I've got no idea :-( Odd.

Thanks for any pointers

...
Uptime: 7h19m56s
Terminate ACPI
Rebooting...
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Tue Oct  1 15:35:39 CEST 2002
    alex@mobile.cichlids.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06a7000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06a70b4.
Calibrating clock(s) ... TSC clock: 647190907 Hz, i8254 clock: 1193189 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC"  frequency 647189786 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (647.19-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 201261056 (196544K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x006ce000 - 0x0bfe7fff, 194093056 bytes (47386 pages)
avail memory = 188153856 (183744K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6a90
bios32: Entry = 0xfd8c0 (c00fd8c0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd8c0+0x11e
pnpbios: Found PnP BIOS data at 0xc00f6ac0
pnpbios: Entry = f0000:8da2  Rev = 1.0
Other BIOS signatures found:
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80003904
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71908086)
Using $PIR table, 4 entries at 0xc00fdf80
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    7    D   0x63  3 4 11
embedded    0   12    A   0x60  3 4 11
embedded    0    9    A   0x62  3 4 5
embedded    0    1    A   0x61  3 4 10 11
ACPI timer looks BAD  min = 1, max = 5, width = 5
ACPI timer looks BAD  min = 2, max = 5, width = 4
ACPI timer looks BAD  min = 1, max = 16777213, width = 16777213
ACPI timer looks BAD  min = 1, max = 5, width = 5
ACPI timer looks BAD  min = 2, max = 5, width = 4
ACPI timer looks BAD  min = 2, max = 5, width = 4
ACPI timer looks BAD  min = 2, max = 16777213, width = 16777212
ACPI timer looks BAD  min = 1, max = 6, width = 6
ACPI timer looks BAD  min = 1, max = 5, width = 5
ACPI timer looks BAD  min = 1, max = 5, width = 5
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base f8000000, size 26, enabled
found->	vendor=0x8086, dev=0x7190, revid=0x03
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
found->	vendor=0x8086, dev=0x7191, revid=0x03
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
found->	vendor=0x8086, dev=0x7110, revid=0x02
	bus=0, slot=7, func=0
	class=06-80-00, hdrtype=0x00, mfdev=1
	map[20]: type 4, range 32, base 00001050, size  4, enabled
found->	vendor=0x8086, dev=0x7111, revid=0x01
	bus=0, slot=7, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	map[20]: type 4, range 32, base 00001060, size  5, port disabled
found->	vendor=0x8086, dev=0x7112, revid=0x01
	bus=0, slot=7, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	intpin=d, irq=255
	map[90]: type 4, range 32, base 00001040, size  4, enabled
found->	vendor=0x8086, dev=0x7113, revid=0x02
	bus=0, slot=7, func=3
	class=06-80-00, hdrtype=0x00, mfdev=0
	map[10]: type 4, range 32, base 00001080, size  7, port disabled
found->	vendor=0x4005, dev=0x0308, revid=0x00
	bus=0, slot=9, func=0
	class=04-01-00, hdrtype=0x00, mfdev=1
	intpin=a, irq=255
	powerspec 2  supports D0 D2 D3  current D0
	map[10]: type 4, range 32, base 00001400, size  2, port disabled
found->	vendor=0x4005, dev=0x0309, revid=0x00
	bus=0, slot=9, func=1
	class=09-80-00, hdrtype=0x00, mfdev=1
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base 88000000, size 12, enabled
found->	vendor=0x1180, dev=0x0475, revid=0x80
	bus=0, slot=12, func=0
	class=06-07-00, hdrtype=0x02, mfdev=0
	intpin=a, irq=255
	powerspec 1  supports D0 D1 D2 D3  current D0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x2000-0x2fff
pcib1:   memory decode     0xfc000000-0xfdffffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pcib1: could not get PCI interrupt routing table - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base fd000000, size 24, enabled
	map[14]: type 4, range 32, base 00002000, size  8, enabled
	map[18]: type 1, range 32, base fc000000, size 12, enabled
found->	vendor=0x1002, dev=0x4c42, revid=0xdc
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	powerspec 1  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1050
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1058
ata1: mask=03 ostat0=25 ostat2=25
ata1-master: ATAPI 25 25
ata1-slave: ATAPI 25 25
ata1: mask=03 stat0=25 stat1=25
ata1-master: ATA 25 25
ata1-slave: ATA 25 25
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f at device 7.2 on pci0
pcib0: matched entry for 0.7.INTD (source \\_SB_.PCI0.ISA_.LNKD)
pcib0: possible interrupts:  3  4  5  7  11  12
pcib0: slot 7 INTD routed to irq 3 via \\_SB_.PCI0.ISA_.LNKD
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 9.0 (no driver attached)
pci0: <input device> at device 9.1 (no driver attached)
cbb0: <RF5C475 PCI-CardBus Bridge> mem 0x88000000-0x88000fff at device 12.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.12.INTA (source \\_SB_.PCI0.ISA_.LNKA)
pcib0: possible interrupts:  3  4  5  7  11  12
pcib0: slot 12 INTA routed to irq 3 via \\_SB_.PCI0.ISA_.LNKA
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
unknown: not probed (disabled)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 
b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f 
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 
b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f 
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:02d8fe3f 0..728=729 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
bpf: lo0 attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
acpi_acad0: On Line
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: NETGEAR, FA410TX, Fast Ethernet
pccard0: Manufacturer code 0x149, product 0x230
pccard0: function 0: network adapter, ccr addr 400 mask b
pccard0: function 0, config table entry 32: I/O card; irq mask befc; iomask 5, iospace 0-1f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 1: I/O card; irq mask befc; iomask a, iospace 300-31f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 2: I/O card; irq mask befc; iomask a, iospace 320-33f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 3: I/O card; irq mask befc; iomask a, iospace 340-35f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 4: I/O card; irq mask befc; iomask a, iospace 380-39f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
ed0: <Linksys Etherfast 10/100 Ethernet> at port 0x100-0x11f irq 3 function 0 config 32 on pccard0
bpf: ed0 attached
ed0: address 00:e0:98:7e:60:10, type Linksys (16 bit) 
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x0010dd, model 0x0001, rev. 2
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <TOSHIBA MK6015MAP/U8.12 A> ATA-5 disk at ata0-master
ad0: 5729MB (11733120 sectors), 12416 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xb, start 63, end = 3357584, size 3357522 : OK
ad0s2: type 0xa5, start 3357585, end = 11727449, size 8369865 : OK
start_init: trying /sbin/init
ed0: device timeout
Linux ELF exec handler installed



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021002002620.GJ85009>