Date: Fri, 10 Oct 2025 21:25:30 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: kevans@FreeBSD.org, olce@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-stable-15-amd64-test - Build #49 - Still Failing Message-ID: <2096306123.877.1760131530992@jenkins.ci.freebsd.org> In-Reply-To: <1802697948.869.1760125936224@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-stable-15-amd64-test - Build #49 (8a0cdfc5a58d75272ec98a14c9cc7469db6b51f0) - Still Failing Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/49/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/49/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/49/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) 59f602e2f229fb20c6da7675db98e92c72ac2591 by olce: getgroups.2: Simplifications; Be clearer on programs to be modified 8a0cdfc5a58d75272ec98a14c9cc7469db6b51f0 by kevans: build: fix ordering of pkgbase targets to get a dtb package reliably The end of the build log: [...truncated 4.07 MiB...] epair0b: Ethernet address: 86:1e:c9:78:86:61 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: b6:c4:1d:06:89:47 epair1b: Ethernet address: 2a:86:21:14:0a:0f epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.145s] sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: be:e9:e7:82:20:c9 epair0b: Ethernet address: b2:b2:fb:64:5c:39 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 12:60:f8:41:20:81 epair1b: Ethernet address: ce:e9:df:ff:73:91 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.138s] sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 46:fa:f4:3c:4e:f0 epair0b: Ethernet address: f2:09:97:3d:c5:4f epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 52:a6:23:3d:88:e7 epair1b: Ethernet address: 1e:d9:f6:65:49:66 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.174s] sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: d6:4a:ac:cf:4a:6b epair0b: Ethernet address: c2:e4:5e:26:38:43 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: aa:f6:9d:67:b1:62 epair1b: Ethernet address: 4a:32:20:1a:76:d8 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.136s] sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: a2:2a:08:e2:21:2b epair0b: Ethernet address: 0a:fb:c6:eb:63:67 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: c6:de:3f:db:5d:20 epair1b: Ethernet address: 7a:71:ad:aa:82:ef epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.178s] sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: b6:fb:19:28:ee:ee epair0b: Ethernet address: ae:1e:96:a6:6b:bc epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 6e:32:66:b5:7d:4f epair1b: Ethernet address: f2:09:de:30:f6:83 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.136s] sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: e2:56:c9:22:04:bc epair0b: Ethernet address: 5a:7a:3b:1d:b8:f4 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 62:67:43:ee:a5:6b epair1b: Ethernet address: 56:2a:5a:4f:0a:58 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.135s] sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: ae:6c:dd:1e:2d:50 epair0b: Ethernet address: ba:18:3e:2d:5e:57 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: ca:c0:fe:69:72:ca epair1b: Ethernet address: de:73:fe:eb:fd:2c epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.137s] sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 06:90:4b:70:99:69 epair0b: Ethernet address: 86:72:0c:2a:74:8b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 4a:f8:59:30:49:ef epair1b: Ethernet address: ae:3f:7f:fe:66:05 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: f2:ef:62:27:10:33 epair2b: Ethernet address: d6:9b:10:e3:c9:3d epair2a: link state changed to UP epair2b: link state changed to UP epair2b: link state changed to DOWN epair2a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.238s] sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 82:a2:cb:f3:ec:8a epair0b: Ethernet address: c6:d8:d0:af:07:9c epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 4a:e2:35:7e:b7:53 epair1b: Ethernet address: 0e:da:44:16:bb:83 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: a6:e4:96:82:43:6c epair2b: Ethernet address: 16:32:e3:fc:89:97 epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled lo0: promiscuous mode disabled epair2a: link state changed to DOWN epair2b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [4.736s] sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 2e:24:a8:af:76:32 epair0b: Ethernet address: 8e:3e:ec:2a:eb:a9 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 72:85:b4:62:50:b4 epair1b: Ethernet address: 8e:b3:a3:2d:69:15 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: ca:42:77:75:a8:23 epair2b: Ethernet address: 66:d5:7e:c3:04:0b epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0x18 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff80c0f132 stack pointer = 0x28:0xfffffe008aef2980 frame pointer = 0x28:0xfffffe008aef29c0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 12 (swi1: netisr 0) rdi: fffffe008aef29d8 rsi: fffff80151f65c96 rdx: 00000000ffffffff rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003 rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0 r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000 r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5 trap number = 12 panic: page fault cpuid = 0 time = 1760131514 KDB: stack backtrace: #0 0xffffffff80bc033d at kdb_backtrace+0x5d #1 0xffffffff80b73726 at vpanic+0x136 #2 0xffffffff80b735e3 at panic+0x43 #3 0xffffffff8107bf69 at trap_pfault+0x3c9 #4 0xffffffff81051b88 at calltrap+0x8 #5 0xffffffff80d84af9 at in6_cksum_partial_l2+0x109 #6 0xffffffff8295cab5 at fr_cksum+0xa5 #7 0xffffffff829621dd at ipf_checkl4sum+0xbd #8 0xffffffff829586f6 at ipf_checkv6sum+0x56 #9 0xffffffff8295a601 at ipf_makefrip+0x1691 #10 0xffffffff8295b6de at ipf_check+0x15e #11 0xffffffff82958c28 at ipf_check_wrapper6+0x58 #12 0xffffffff80cc3438 at pfil_mbuf_in+0x38 #13 0xffffffff80d92b74 at ip6_input+0x484 #14 0xffffffff80cc0c98 at swi_net+0x128 #15 0xffffffff80b2d359 at ithread_loop+0x239 #16 0xffffffff80b298eb at fork_exit+0x7b #17 0xffffffff81052bae at fork_trampoline+0xe Uptime: 1h31m21s Automatic reboot in 15 seconds - press a key on the console to abort + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-49' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./disable-dtrace-tests.sh x ./run.sh x ./disable-zfs-tests.sh x ./disable-notyet-tests.sh x ./run-kyua.sh x ./auto-shutdown + rm -f 'test-report.*' + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins2858608055851172116.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': '8a0cdfc5a58d75272ec98a14c9cc7469db6b51f0', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: stable-15/latest_tested/amd64/amd64 -> ../../8a0cdfc5a58d75272ec98a14c9cc7469db6b51f0/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2096306123.877.1760131530992>