Date: Sun, 14 Jan 2001 10:59:05 -0800 (PST) From: mbretter@inode.at To: freebsd-gnats-submit@FreeBSD.org Subject: kern/24325: Athlon Thunderbird 700 on Asus K7M vs. FreeBSD4.2 Message-ID: <200101141859.f0EIx5j65197@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 24325
>Category: kern
>Synopsis: Athlon Thunderbird 700 on Asus K7M vs. FreeBSD4.2
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Jan 14 11:00:01 PST 2001
>Closed-Date:
>Last-Modified:
>Originator: Michael Bretterklieber
>Release: 4.2
>Organization:
JAWA Management und Software
>Environment:
FreeBSD worf.jawa.at 4.2-RELEASE FreeBSD 4.2-RELEASE #0: Sun Dec 3 16:30:36 CET 2000
root@worf.jawa.at:/usr/src/sys/compile/WORF i386
>Description:
I have problems with my Athlon Thunderbird 700 on an Asus K7M Motherboard (Bios 1009) and FreeBSD 4.2.
The system is very very slow, like on an old 386. Keyboard clicks are delayed, it like I work over a
slow network. I have this problems since I updatet from an Athlon 500 to this Athlon Thunderbird 700.
I have on the same Harddisk Win98 and Win2K and they work without problems, fast and stable.
After the installation of the new processor I made a BIOS-Upgrade to the latest version.
Before I made the BIOS-upgrade, the system was slow, like on an PII 200 and
unstable on all Win98, Win2k and FreeBSD. The BIOS has not recognized the CPU
correctly ("AMD-(unknown)"). With 3DMark2000 it only reached about 600 points.
After the BIOS-upgrade everything worked great on Win98 and Win2k, I reached 1771
points with 3DMark2000, but FreeBSD not worked correctly.
This situation is disastrous for me, because I had to work under FreeBSD, so I hope, that somebody can help.
kernel output:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #1: Sat Dec 2 21:47:42 CET 2000
root@worf.jawa.at:/usr/src/sys/compile/WORF
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (704.94-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 134152192 (131008K bytes)
config> q
avail memory = 127262720 (124280K bytes)
Preloaded elf kernel "kernel" at 0xc0354000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035409c.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AMD-751 host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AMD-751 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 5.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 4.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 4.2 irq 9
chip1: <VIA 82C686 ACPI interface> at device 4.4 on pci0
pcm0: <VIA VT82C686A AC'97 Audio> port 0xd000-0xd003,0xd400-0xd4ff irq
10 at device 4.5 on pci0
bktr0: <BrookTree 878> mem 0xeddfd000-0xeddfdfff irq 5 at device 14.0
on
pci0
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
bktr0: Card has no configuration EEPROM. Cannot determine card make.
bktr0: Pinnacle/Miro TV, Temic NTSC tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 14.1 irq 5
sym0: <810a> port 0xd800-0xd8ff mem 0xefffff00-0xefffffff irq 10 at
device 15.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using LOAD/STORE-based firmware.
de0: <Digital 21041 Ethernet> port 0xc800-0xc87f mem
0xeffffe80-0xeffffeff irq 9 at device 16.0 on pci0
de0: SMC 21041 [10Mb/s] pass 1.1
de0: address 00:00:c0:99:b5:bf
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 890C> PCL,MLC,PML
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ppi0: <Parallel I/O> on ppbus0
joy0 at port 0x201 on isa0
de0: enabling 10baseT port
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA66
ad2: 9641MB <IBM-DTTA-371010> [19590/16/63] at ata1-master UDMA33
ad3: 6197MB <IBM-DHEA-36481> [12592/16/63] at ata1-slave UDMA33
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(probe5:sym0:0:5:0): phase change 6-7 6@07e2ef8c resid=4.
Mounting root from ufs:/dev/ad0s3a
cd0 at sym0 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-R PX-W8220T 1.01> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
- tray closed
da0 at sym0 bus 0 target 5 lun 0
da0: <IOMEGA ZIP 100 D.09> Removable Direct Access SCSI-2 device
da0: 3.300MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
uhci0: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 9 at device
4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200101141859.f0EIx5j65197>