Date: Thu, 15 Oct 2009 20:07:08 +0000 (UTC) From: Andrew Thompson <thompsa@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r198151 - in head/sys/dev: pci usb/controller Message-ID: <200910152007.n9FK78cG083259@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: thompsa Date: Thu Oct 15 20:07:08 2009 New Revision: 198151 URL: http://svn.freebsd.org/changeset/base/198151 Log: Workaround buggy BIOS code in USB regard. By doing the BIOS to OS handover for all host controllers at the same time, we avoid problems where the BIOS will actually write to the USB registers of all the USB host controllers every time we handover one of them, and consequently reset the OS programmed values. Submitted by: avg Reviewed by: jhb Added: head/sys/dev/usb/controller/ehcireg.h (contents, props changed) head/sys/dev/usb/controller/ohcireg.h (contents, props changed) head/sys/dev/usb/controller/uhcireg.h (contents, props changed) Modified: head/sys/dev/pci/pci.c head/sys/dev/usb/controller/ehci.c head/sys/dev/usb/controller/ehci.h head/sys/dev/usb/controller/ehci_ixp4xx.c head/sys/dev/usb/controller/ehci_mbus.c head/sys/dev/usb/controller/ehci_pci.c head/sys/dev/usb/controller/ohci.c head/sys/dev/usb/controller/ohci.h head/sys/dev/usb/controller/ohci_atmelarm.c head/sys/dev/usb/controller/ohci_pci.c head/sys/dev/usb/controller/uhci.c head/sys/dev/usb/controller/uhci.h head/sys/dev/usb/controller/uhci_pci.c Modified: head/sys/dev/pci/pci.c ============================================================================== --- head/sys/dev/pci/pci.c Thu Oct 15 19:50:00 2009 (r198150) +++ head/sys/dev/pci/pci.c Thu Oct 15 20:07:08 2009 (r198151) @@ -62,6 +62,10 @@ __FBSDID("$FreeBSD$"); #include <dev/pci/pcivar.h> #include <dev/pci/pci_private.h> +#include <dev/usb/controller/ehcireg.h> +#include <dev/usb/controller/ohcireg.h> +#include <dev/usb/controller/uhcireg.h> + #include "pcib_if.h" #include "pci_if.h" @@ -270,6 +274,13 @@ TUNABLE_INT("hw.pci.honor_msi_blacklist" SYSCTL_INT(_hw_pci, OID_AUTO, honor_msi_blacklist, CTLFLAG_RD, &pci_honor_msi_blacklist, 1, "Honor chipset blacklist for MSI"); +static int pci_usb_takeover = 1; +TUNABLE_INT("hw.pci.usb_early_takeover", &pci_usb_takeover); +SYSCTL_INT(_hw_pci, OID_AUTO, usb_early_takeover, CTLFLAG_RD | CTLFLAG_TUN, + &pci_usb_takeover, 1, "Enable early takeover of USB controllers.\n\ +Disable this if you depend on BIOS emulation of USB devices, that is\n\ +you use USB devices (like keyboard or mouse) but do not load USB drivers"); + /* Find a device_t by bus/slot/function in domain 0 */ device_t @@ -2569,6 +2580,106 @@ pci_assign_interrupt(device_t bus, devic resource_list_add(&dinfo->resources, SYS_RES_IRQ, 0, irq, irq, 1); } +/* Perform early OHCI takeover from SMM. */ +static void +ohci_early_takeover(device_t self) +{ + struct resource *res; + uint32_t ctl; + int rid; + int i; + + rid = PCIR_BAR(0); + res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, RF_ACTIVE); + if (res == NULL) + return; + + ctl = bus_read_4(res, OHCI_CONTROL); + if (ctl & OHCI_IR) { + if (bootverbose) + printf("ohci early: " + "SMM active, request owner change\n"); + bus_write_4(res, OHCI_COMMAND_STATUS, OHCI_OCR); + for (i = 0; (i < 100) && (ctl & OHCI_IR); i++) { + DELAY(1000); + ctl = bus_read_4(res, OHCI_CONTROL); + } + if (ctl & OHCI_IR) { + if (bootverbose) + printf("ohci early: " + "SMM does not respond, resetting\n"); + bus_write_4(res, OHCI_CONTROL, OHCI_HCFS_RESET); + } + } + + bus_release_resource(self, SYS_RES_MEMORY, rid, res); +} + +/* Perform early UHCI takeover from SMM. */ +static void +uhci_early_takeover(device_t self) +{ + /* + * Set the PIRQD enable bit and switch off all the others. We don't + * want legacy support to interfere with us XXX Does this also mean + * that the BIOS won't touch the keyboard anymore if it is connected + * to the ports of the root hub? + */ + pci_write_config(self, PCI_LEGSUP, PCI_LEGSUP_USBPIRQDEN, 2); +} + +/* Perform early EHCI takeover from SMM. */ +static void +ehci_early_takeover(device_t self) +{ + struct resource *res; + uint32_t cparams; + uint32_t eec; + uint8_t eecp; + uint8_t bios_sem; + int rid; + int i; + + rid = PCIR_BAR(0); + res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, RF_ACTIVE); + if (res == NULL) + return; + + cparams = bus_read_4(res, EHCI_HCCPARAMS); + + /* Synchronise with the BIOS if it owns the controller. */ + for (eecp = EHCI_HCC_EECP(cparams); eecp != 0; + eecp = EHCI_EECP_NEXT(eec)) { + eec = pci_read_config(self, eecp, 4); + if (EHCI_EECP_ID(eec) != EHCI_EC_LEGSUP) { + continue; + } + bios_sem = pci_read_config(self, eecp + + EHCI_LEGSUP_BIOS_SEM, 1); + if (bios_sem == 0) { + continue; + } + if (bootverbose) + printf("ehci early: " + "SMM active, request owner change\n"); + + pci_write_config(self, eecp + EHCI_LEGSUP_OS_SEM, 1, 1); + + for (i = 0; (i < 100) && (bios_sem != 0); i++) { + DELAY(1000); + bios_sem = pci_read_config(self, eecp + + EHCI_LEGSUP_BIOS_SEM, 1); + } + + if (bios_sem != 0) { + if (bootverbose) + printf("ehci early: " + "SMM does not respond\n"); + } + } + bus_release_resource(self, SYS_RES_MEMORY, rid, res); +} + void pci_add_resources(device_t bus, device_t dev, int force, uint32_t prefetchmask) { @@ -2612,6 +2723,16 @@ pci_add_resources(device_t bus, device_t pci_assign_interrupt(bus, dev, 0); #endif } + + if (pci_usb_takeover && pci_get_class(dev) == PCIC_SERIALBUS && + pci_get_subclass(dev) == PCIS_SERIALBUS_USB) { + if (pci_get_progif(dev) == PCIP_SERIALBUS_USB_EHCI) + ehci_early_takeover(dev); + else if (pci_get_progif(dev) == PCIP_SERIALBUS_USB_OHCI) + ohci_early_takeover(dev); + else if (pci_get_progif(dev) == PCIP_SERIALBUS_USB_UHCI) + uhci_early_takeover(dev); + } } void Modified: head/sys/dev/usb/controller/ehci.c ============================================================================== --- head/sys/dev/usb/controller/ehci.c Thu Oct 15 19:50:00 2009 (r198150) +++ head/sys/dev/usb/controller/ehci.c Thu Oct 15 20:07:08 2009 (r198151) @@ -83,6 +83,7 @@ __FBSDID("$FreeBSD$"); #include <dev/usb/usb_controller.h> #include <dev/usb/usb_bus.h> #include <dev/usb/controller/ehci.h> +#include <dev/usb/controller/ehcireg.h> #define EHCI_BUS2SC(bus) \ ((ehci_softc_t *)(((uint8_t *)(bus)) - \ Modified: head/sys/dev/usb/controller/ehci.h ============================================================================== --- head/sys/dev/usb/controller/ehci.h Thu Oct 15 19:50:00 2009 (r198150) +++ head/sys/dev/usb/controller/ehci.h Thu Oct 15 20:07:08 2009 (r198151) @@ -40,139 +40,6 @@ #define EHCI_MAX_DEVICES MIN(USB_MAX_DEVICES, 128) -/* PCI config registers */ -#define PCI_CBMEM 0x10 /* configuration base MEM */ -#define PCI_INTERFACE_EHCI 0x20 -#define PCI_USBREV 0x60 /* RO USB protocol revision */ -#define PCI_USB_REV_MASK 0xff -#define PCI_USB_REV_PRE_1_0 0x00 -#define PCI_USB_REV_1_0 0x10 -#define PCI_USB_REV_1_1 0x11 -#define PCI_USB_REV_2_0 0x20 -#define PCI_EHCI_FLADJ 0x61 /* RW Frame len adj, SOF=59488+6*fladj */ -#define PCI_EHCI_PORTWAKECAP 0x62 /* RW Port wake caps (opt) */ - -/* EHCI Extended Capabilities */ -#define EHCI_EC_LEGSUP 0x01 -#define EHCI_EECP_NEXT(x) (((x) >> 8) & 0xff) -#define EHCI_EECP_ID(x) ((x) & 0xff) - -/* Legacy support extended capability */ -#define EHCI_LEGSUP_BIOS_SEM 0x02 -#define EHCI_LEGSUP_OS_SEM 0x03 -#define EHCI_LEGSUP_USBLEGCTLSTS 0x04 - -/* EHCI capability registers */ -#define EHCI_CAPLENGTH 0x00 /* RO Capability register length field */ -/* reserved 0x01 */ -#define EHCI_HCIVERSION 0x02 /* RO Interface version number */ -#define EHCI_HCSPARAMS 0x04 /* RO Structural parameters */ -#define EHCI_HCS_DEBUGPORT(x) (((x) >> 20) & 0xf) -#define EHCI_HCS_P_INDICATOR(x) ((x) & 0x10000) -#define EHCI_HCS_N_CC(x) (((x) >> 12) & 0xf) /* # of companion ctlrs */ -#define EHCI_HCS_N_PCC(x) (((x) >> 8) & 0xf) /* # of ports per comp. */ -#define EHCI_HCS_PPC(x) ((x) & 0x10) /* port power control */ -#define EHCI_HCS_N_PORTS(x) ((x) & 0xf) /* # of ports */ -#define EHCI_HCCPARAMS 0x08 /* RO Capability parameters */ -#define EHCI_HCC_EECP(x) (((x) >> 8) & 0xff) /* extended ports caps */ -#define EHCI_HCC_IST(x) (((x) >> 4) & 0xf) /* isoc sched threshold */ -#define EHCI_HCC_ASPC(x) ((x) & 0x4) /* async sched park cap */ -#define EHCI_HCC_PFLF(x) ((x) & 0x2) /* prog frame list flag */ -#define EHCI_HCC_64BIT(x) ((x) & 0x1) /* 64 bit address cap */ -#define EHCI_HCSP_PORTROUTE 0x0c /* RO Companion port route description */ - -/* EHCI operational registers. Offset given by EHCI_CAPLENGTH register */ -#define EHCI_USBCMD 0x00 /* RO, RW, WO Command register */ -#define EHCI_CMD_ITC_M 0x00ff0000 /* RW interrupt threshold ctrl */ -#define EHCI_CMD_ITC_1 0x00010000 -#define EHCI_CMD_ITC_2 0x00020000 -#define EHCI_CMD_ITC_4 0x00040000 -#define EHCI_CMD_ITC_8 0x00080000 -#define EHCI_CMD_ITC_16 0x00100000 -#define EHCI_CMD_ITC_32 0x00200000 -#define EHCI_CMD_ITC_64 0x00400000 -#define EHCI_CMD_ASPME 0x00000800 /* RW/RO async park enable */ -#define EHCI_CMD_ASPMC 0x00000300 /* RW/RO async park count */ -#define EHCI_CMD_LHCR 0x00000080 /* RW light host ctrl reset */ -#define EHCI_CMD_IAAD 0x00000040 /* RW intr on async adv door - * bell */ -#define EHCI_CMD_ASE 0x00000020 /* RW async sched enable */ -#define EHCI_CMD_PSE 0x00000010 /* RW periodic sched enable */ -#define EHCI_CMD_FLS_M 0x0000000c /* RW/RO frame list size */ -#define EHCI_CMD_FLS(x) (((x) >> 2) & 3) /* RW/RO frame list size */ -#define EHCI_CMD_HCRESET 0x00000002 /* RW reset */ -#define EHCI_CMD_RS 0x00000001 /* RW run/stop */ -#define EHCI_USBSTS 0x04 /* RO, RW, RWC Status register */ -#define EHCI_STS_ASS 0x00008000 /* RO async sched status */ -#define EHCI_STS_PSS 0x00004000 /* RO periodic sched status */ -#define EHCI_STS_REC 0x00002000 /* RO reclamation */ -#define EHCI_STS_HCH 0x00001000 /* RO host controller halted */ -#define EHCI_STS_IAA 0x00000020 /* RWC interrupt on async adv */ -#define EHCI_STS_HSE 0x00000010 /* RWC host system error */ -#define EHCI_STS_FLR 0x00000008 /* RWC frame list rollover */ -#define EHCI_STS_PCD 0x00000004 /* RWC port change detect */ -#define EHCI_STS_ERRINT 0x00000002 /* RWC error interrupt */ -#define EHCI_STS_INT 0x00000001 /* RWC interrupt */ -#define EHCI_STS_INTRS(x) ((x) & 0x3f) - -/* - * NOTE: the doorbell interrupt is enabled, but the doorbell is never - * used! SiS chipsets require this. - */ -#define EHCI_NORMAL_INTRS (EHCI_STS_IAA | EHCI_STS_HSE | \ - EHCI_STS_PCD | EHCI_STS_ERRINT | EHCI_STS_INT) - -#define EHCI_USBINTR 0x08 /* RW Interrupt register */ -#define EHCI_INTR_IAAE 0x00000020 /* interrupt on async advance - * ena */ -#define EHCI_INTR_HSEE 0x00000010 /* host system error ena */ -#define EHCI_INTR_FLRE 0x00000008 /* frame list rollover ena */ -#define EHCI_INTR_PCIE 0x00000004 /* port change ena */ -#define EHCI_INTR_UEIE 0x00000002 /* USB error intr ena */ -#define EHCI_INTR_UIE 0x00000001 /* USB intr ena */ - -#define EHCI_FRINDEX 0x0c /* RW Frame Index register */ - -#define EHCI_CTRLDSSEGMENT 0x10 /* RW Control Data Structure Segment */ - -#define EHCI_PERIODICLISTBASE 0x14 /* RW Periodic List Base */ -#define EHCI_ASYNCLISTADDR 0x18 /* RW Async List Base */ - -#define EHCI_CONFIGFLAG 0x40 /* RW Configure Flag register */ -#define EHCI_CONF_CF 0x00000001 /* RW configure flag */ - -#define EHCI_PORTSC(n) (0x40+(4*(n))) /* RO, RW, RWC Port Status reg */ -#define EHCI_PS_WKOC_E 0x00400000 /* RW wake on over current ena */ -#define EHCI_PS_WKDSCNNT_E 0x00200000 /* RW wake on disconnect ena */ -#define EHCI_PS_WKCNNT_E 0x00100000 /* RW wake on connect ena */ -#define EHCI_PS_PTC 0x000f0000 /* RW port test control */ -#define EHCI_PS_PIC 0x0000c000 /* RW port indicator control */ -#define EHCI_PS_PO 0x00002000 /* RW port owner */ -#define EHCI_PS_PP 0x00001000 /* RW,RO port power */ -#define EHCI_PS_LS 0x00000c00 /* RO line status */ -#define EHCI_PS_IS_LOWSPEED(x) (((x) & EHCI_PS_LS) == 0x00000400) -#define EHCI_PS_PR 0x00000100 /* RW port reset */ -#define EHCI_PS_SUSP 0x00000080 /* RW suspend */ -#define EHCI_PS_FPR 0x00000040 /* RW force port resume */ -#define EHCI_PS_OCC 0x00000020 /* RWC over current change */ -#define EHCI_PS_OCA 0x00000010 /* RO over current active */ -#define EHCI_PS_PEC 0x00000008 /* RWC port enable change */ -#define EHCI_PS_PE 0x00000004 /* RW port enable */ -#define EHCI_PS_CSC 0x00000002 /* RWC connect status change */ -#define EHCI_PS_CS 0x00000001 /* RO connect status */ -#define EHCI_PS_CLEAR (EHCI_PS_OCC | EHCI_PS_PEC | EHCI_PS_CSC) - -#define EHCI_USBMODE 0x68 /* RW USB Device mode register */ -#define EHCI_UM_CM 0x00000003 /* R/WO Controller Mode */ -#define EHCI_UM_CM_IDLE 0x0 /* Idle */ -#define EHCI_UM_CM_HOST 0x3 /* Host Controller */ -#define EHCI_UM_ES 0x00000004 /* R/WO Endian Select */ -#define EHCI_UM_ES_LE 0x0 /* Little-endian byte alignment */ -#define EHCI_UM_ES_BE 0x4 /* Big-endian byte alignment */ -#define EHCI_UM_SDIS 0x00000010 /* R/WO Stream Disable Mode */ - -#define EHCI_PORT_RESET_COMPLETE 2 /* ms */ - /* * Alignment NOTE: structures must be aligned so that the hardware can index * without performing addition. Modified: head/sys/dev/usb/controller/ehci_ixp4xx.c ============================================================================== --- head/sys/dev/usb/controller/ehci_ixp4xx.c Thu Oct 15 19:50:00 2009 (r198150) +++ head/sys/dev/usb/controller/ehci_ixp4xx.c Thu Oct 15 20:07:08 2009 (r198151) @@ -62,6 +62,7 @@ __FBSDID("$FreeBSD$"); #include <dev/usb/usb_controller.h> #include <dev/usb/usb_bus.h> #include <dev/usb/controller/ehci.h> +#include <dev/usb/controller/ehcireg.h> #include <arm/xscale/ixp425/ixp425reg.h> #include <arm/xscale/ixp425/ixp425var.h> Modified: head/sys/dev/usb/controller/ehci_mbus.c ============================================================================== --- head/sys/dev/usb/controller/ehci_mbus.c Thu Oct 15 19:50:00 2009 (r198150) +++ head/sys/dev/usb/controller/ehci_mbus.c Thu Oct 15 20:07:08 2009 (r198151) @@ -69,6 +69,7 @@ __FBSDID("$FreeBSD$"); #include <dev/usb/usb_controller.h> #include <dev/usb/usb_bus.h> #include <dev/usb/controller/ehci.h> +#include <dev/usb/controller/ehcireg.h> #include <arm/mv/mvreg.h> #include <arm/mv/mvvar.h> Modified: head/sys/dev/usb/controller/ehci_pci.c ============================================================================== --- head/sys/dev/usb/controller/ehci_pci.c Thu Oct 15 19:50:00 2009 (r198150) +++ head/sys/dev/usb/controller/ehci_pci.c Thu Oct 15 20:07:08 2009 (r198151) @@ -84,6 +84,7 @@ __FBSDID("$FreeBSD$"); #include <dev/usb/usb_bus.h> #include <dev/usb/usb_pci.h> #include <dev/usb/controller/ehci.h> +#include <dev/usb/controller/ehcireg.h> #define PCI_EHCI_VENDORID_ACERLABS 0x10b9 #define PCI_EHCI_VENDORID_AMD 0x1022 Added: head/sys/dev/usb/controller/ehcireg.h ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/dev/usb/controller/ehcireg.h Thu Oct 15 20:07:08 2009 (r198151) @@ -0,0 +1,174 @@ +/* $FreeBSD$ */ +/*- + * Copyright (c) 2001 The NetBSD Foundation, Inc. + * All rights reserved. + * + * This code is derived from software contributed to The NetBSD Foundation + * by Lennart Augustsson (lennart@augustsson.net). + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the NetBSD + * Foundation, Inc. and its contributors. + * 4. Neither the name of The NetBSD Foundation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _EHCIREG_H_ +#define _EHCIREG_H_ + +/* PCI config registers */ +#define PCI_CBMEM 0x10 /* configuration base MEM */ +#define PCI_INTERFACE_EHCI 0x20 +#define PCI_USBREV 0x60 /* RO USB protocol revision */ +#define PCI_USB_REV_MASK 0xff +#define PCI_USB_REV_PRE_1_0 0x00 +#define PCI_USB_REV_1_0 0x10 +#define PCI_USB_REV_1_1 0x11 +#define PCI_USB_REV_2_0 0x20 +#define PCI_EHCI_FLADJ 0x61 /* RW Frame len adj, SOF=59488+6*fladj */ +#define PCI_EHCI_PORTWAKECAP 0x62 /* RW Port wake caps (opt) */ + +/* EHCI Extended Capabilities */ +#define EHCI_EC_LEGSUP 0x01 +#define EHCI_EECP_NEXT(x) (((x) >> 8) & 0xff) +#define EHCI_EECP_ID(x) ((x) & 0xff) + +/* Legacy support extended capability */ +#define EHCI_LEGSUP_BIOS_SEM 0x02 +#define EHCI_LEGSUP_OS_SEM 0x03 +#define EHCI_LEGSUP_USBLEGCTLSTS 0x04 + +/* EHCI capability registers */ +#define EHCI_CAPLENGTH 0x00 /* RO Capability register length field */ +/* reserved 0x01 */ +#define EHCI_HCIVERSION 0x02 /* RO Interface version number */ +#define EHCI_HCSPARAMS 0x04 /* RO Structural parameters */ +#define EHCI_HCS_DEBUGPORT(x) (((x) >> 20) & 0xf) +#define EHCI_HCS_P_INDICATOR(x) ((x) & 0x10000) +#define EHCI_HCS_N_CC(x) (((x) >> 12) & 0xf) /* # of companion ctlrs */ +#define EHCI_HCS_N_PCC(x) (((x) >> 8) & 0xf) /* # of ports per comp. */ +#define EHCI_HCS_PPC(x) ((x) & 0x10) /* port power control */ +#define EHCI_HCS_N_PORTS(x) ((x) & 0xf) /* # of ports */ +#define EHCI_HCCPARAMS 0x08 /* RO Capability parameters */ +#define EHCI_HCC_EECP(x) (((x) >> 8) & 0xff) /* extended ports caps */ +#define EHCI_HCC_IST(x) (((x) >> 4) & 0xf) /* isoc sched threshold */ +#define EHCI_HCC_ASPC(x) ((x) & 0x4) /* async sched park cap */ +#define EHCI_HCC_PFLF(x) ((x) & 0x2) /* prog frame list flag */ +#define EHCI_HCC_64BIT(x) ((x) & 0x1) /* 64 bit address cap */ +#define EHCI_HCSP_PORTROUTE 0x0c /* RO Companion port route description */ + +/* EHCI operational registers. Offset given by EHCI_CAPLENGTH register */ +#define EHCI_USBCMD 0x00 /* RO, RW, WO Command register */ +#define EHCI_CMD_ITC_M 0x00ff0000 /* RW interrupt threshold ctrl */ +#define EHCI_CMD_ITC_1 0x00010000 +#define EHCI_CMD_ITC_2 0x00020000 +#define EHCI_CMD_ITC_4 0x00040000 +#define EHCI_CMD_ITC_8 0x00080000 +#define EHCI_CMD_ITC_16 0x00100000 +#define EHCI_CMD_ITC_32 0x00200000 +#define EHCI_CMD_ITC_64 0x00400000 +#define EHCI_CMD_ASPME 0x00000800 /* RW/RO async park enable */ +#define EHCI_CMD_ASPMC 0x00000300 /* RW/RO async park count */ +#define EHCI_CMD_LHCR 0x00000080 /* RW light host ctrl reset */ +#define EHCI_CMD_IAAD 0x00000040 /* RW intr on async adv door + * bell */ +#define EHCI_CMD_ASE 0x00000020 /* RW async sched enable */ +#define EHCI_CMD_PSE 0x00000010 /* RW periodic sched enable */ +#define EHCI_CMD_FLS_M 0x0000000c /* RW/RO frame list size */ +#define EHCI_CMD_FLS(x) (((x) >> 2) & 3) /* RW/RO frame list size */ +#define EHCI_CMD_HCRESET 0x00000002 /* RW reset */ +#define EHCI_CMD_RS 0x00000001 /* RW run/stop */ +#define EHCI_USBSTS 0x04 /* RO, RW, RWC Status register */ +#define EHCI_STS_ASS 0x00008000 /* RO async sched status */ +#define EHCI_STS_PSS 0x00004000 /* RO periodic sched status */ +#define EHCI_STS_REC 0x00002000 /* RO reclamation */ +#define EHCI_STS_HCH 0x00001000 /* RO host controller halted */ +#define EHCI_STS_IAA 0x00000020 /* RWC interrupt on async adv */ +#define EHCI_STS_HSE 0x00000010 /* RWC host system error */ +#define EHCI_STS_FLR 0x00000008 /* RWC frame list rollover */ +#define EHCI_STS_PCD 0x00000004 /* RWC port change detect */ +#define EHCI_STS_ERRINT 0x00000002 /* RWC error interrupt */ +#define EHCI_STS_INT 0x00000001 /* RWC interrupt */ +#define EHCI_STS_INTRS(x) ((x) & 0x3f) + +/* + * NOTE: the doorbell interrupt is enabled, but the doorbell is never + * used! SiS chipsets require this. + */ +#define EHCI_NORMAL_INTRS (EHCI_STS_IAA | EHCI_STS_HSE | \ + EHCI_STS_PCD | EHCI_STS_ERRINT | EHCI_STS_INT) + +#define EHCI_USBINTR 0x08 /* RW Interrupt register */ +#define EHCI_INTR_IAAE 0x00000020 /* interrupt on async advance + * ena */ +#define EHCI_INTR_HSEE 0x00000010 /* host system error ena */ +#define EHCI_INTR_FLRE 0x00000008 /* frame list rollover ena */ +#define EHCI_INTR_PCIE 0x00000004 /* port change ena */ +#define EHCI_INTR_UEIE 0x00000002 /* USB error intr ena */ +#define EHCI_INTR_UIE 0x00000001 /* USB intr ena */ + +#define EHCI_FRINDEX 0x0c /* RW Frame Index register */ + +#define EHCI_CTRLDSSEGMENT 0x10 /* RW Control Data Structure Segment */ + +#define EHCI_PERIODICLISTBASE 0x14 /* RW Periodic List Base */ +#define EHCI_ASYNCLISTADDR 0x18 /* RW Async List Base */ + +#define EHCI_CONFIGFLAG 0x40 /* RW Configure Flag register */ +#define EHCI_CONF_CF 0x00000001 /* RW configure flag */ + +#define EHCI_PORTSC(n) (0x40+(4*(n))) /* RO, RW, RWC Port Status reg */ +#define EHCI_PS_WKOC_E 0x00400000 /* RW wake on over current ena */ +#define EHCI_PS_WKDSCNNT_E 0x00200000 /* RW wake on disconnect ena */ +#define EHCI_PS_WKCNNT_E 0x00100000 /* RW wake on connect ena */ +#define EHCI_PS_PTC 0x000f0000 /* RW port test control */ +#define EHCI_PS_PIC 0x0000c000 /* RW port indicator control */ +#define EHCI_PS_PO 0x00002000 /* RW port owner */ +#define EHCI_PS_PP 0x00001000 /* RW,RO port power */ +#define EHCI_PS_LS 0x00000c00 /* RO line status */ +#define EHCI_PS_IS_LOWSPEED(x) (((x) & EHCI_PS_LS) == 0x00000400) +#define EHCI_PS_PR 0x00000100 /* RW port reset */ +#define EHCI_PS_SUSP 0x00000080 /* RW suspend */ +#define EHCI_PS_FPR 0x00000040 /* RW force port resume */ +#define EHCI_PS_OCC 0x00000020 /* RWC over current change */ +#define EHCI_PS_OCA 0x00000010 /* RO over current active */ +#define EHCI_PS_PEC 0x00000008 /* RWC port enable change */ +#define EHCI_PS_PE 0x00000004 /* RW port enable */ +#define EHCI_PS_CSC 0x00000002 /* RWC connect status change */ +#define EHCI_PS_CS 0x00000001 /* RO connect status */ +#define EHCI_PS_CLEAR (EHCI_PS_OCC | EHCI_PS_PEC | EHCI_PS_CSC) + +#define EHCI_USBMODE 0x68 /* RW USB Device mode register */ +#define EHCI_UM_CM 0x00000003 /* R/WO Controller Mode */ +#define EHCI_UM_CM_IDLE 0x0 /* Idle */ +#define EHCI_UM_CM_HOST 0x3 /* Host Controller */ +#define EHCI_UM_ES 0x00000004 /* R/WO Endian Select */ +#define EHCI_UM_ES_LE 0x0 /* Little-endian byte alignment */ +#define EHCI_UM_ES_BE 0x4 /* Big-endian byte alignment */ +#define EHCI_UM_SDIS 0x00000010 /* R/WO Stream Disable Mode */ + +#define EHCI_PORT_RESET_COMPLETE 2 /* ms */ + +#endif /* _EHCIREG_H_ */ Modified: head/sys/dev/usb/controller/ohci.c ============================================================================== --- head/sys/dev/usb/controller/ohci.c Thu Oct 15 19:50:00 2009 (r198150) +++ head/sys/dev/usb/controller/ohci.c Thu Oct 15 20:07:08 2009 (r198151) @@ -72,6 +72,7 @@ __FBSDID("$FreeBSD$"); #include <dev/usb/usb_controller.h> #include <dev/usb/usb_bus.h> #include <dev/usb/controller/ohci.h> +#include <dev/usb/controller/ohcireg.h> #define OHCI_BUS2SC(bus) \ ((ohci_softc_t *)(((uint8_t *)(bus)) - \ Modified: head/sys/dev/usb/controller/ohci.h ============================================================================== --- head/sys/dev/usb/controller/ohci.h Thu Oct 15 19:50:00 2009 (r198150) +++ head/sys/dev/usb/controller/ohci.h Thu Oct 15 20:07:08 2009 (r198151) @@ -41,95 +41,6 @@ #define OHCI_MAX_DEVICES MIN(USB_MAX_DEVICES, 128) -/* PCI config registers */ -#define PCI_CBMEM 0x10 /* configuration base memory */ -#define PCI_INTERFACE_OHCI 0x10 - -/* OHCI registers */ -#define OHCI_REVISION 0x00 /* OHCI revision */ -#define OHCI_REV_LO(rev) ((rev) & 0xf) -#define OHCI_REV_HI(rev) (((rev)>>4) & 0xf) -#define OHCI_REV_LEGACY(rev) ((rev) & 0x100) -#define OHCI_CONTROL 0x04 -#define OHCI_CBSR_MASK 0x00000003 /* Control/Bulk Service Ratio */ -#define OHCI_RATIO_1_1 0x00000000 -#define OHCI_RATIO_1_2 0x00000001 -#define OHCI_RATIO_1_3 0x00000002 -#define OHCI_RATIO_1_4 0x00000003 -#define OHCI_PLE 0x00000004 /* Periodic List Enable */ -#define OHCI_IE 0x00000008 /* Isochronous Enable */ -#define OHCI_CLE 0x00000010 /* Control List Enable */ -#define OHCI_BLE 0x00000020 /* Bulk List Enable */ -#define OHCI_HCFS_MASK 0x000000c0 /* HostControllerFunctionalStat - * e */ -#define OHCI_HCFS_RESET 0x00000000 -#define OHCI_HCFS_RESUME 0x00000040 -#define OHCI_HCFS_OPERATIONAL 0x00000080 -#define OHCI_HCFS_SUSPEND 0x000000c0 -#define OHCI_IR 0x00000100 /* Interrupt Routing */ -#define OHCI_RWC 0x00000200 /* Remote Wakeup Connected */ -#define OHCI_RWE 0x00000400 /* Remote Wakeup Enabled */ -#define OHCI_COMMAND_STATUS 0x08 -#define OHCI_HCR 0x00000001 /* Host Controller Reset */ -#define OHCI_CLF 0x00000002 /* Control List Filled */ -#define OHCI_BLF 0x00000004 /* Bulk List Filled */ -#define OHCI_OCR 0x00000008 /* Ownership Change Request */ -#define OHCI_SOC_MASK 0x00030000 /* Scheduling Overrun Count */ -#define OHCI_INTERRUPT_STATUS 0x0c -#define OHCI_SO 0x00000001 /* Scheduling Overrun */ -#define OHCI_WDH 0x00000002 /* Writeback Done Head */ -#define OHCI_SF 0x00000004 /* Start of Frame */ -#define OHCI_RD 0x00000008 /* Resume Detected */ -#define OHCI_UE 0x00000010 /* Unrecoverable Error */ -#define OHCI_FNO 0x00000020 /* Frame Number Overflow */ -#define OHCI_RHSC 0x00000040 /* Root Hub Status Change */ -#define OHCI_OC 0x40000000 /* Ownership Change */ -#define OHCI_MIE 0x80000000 /* Master Interrupt Enable */ -#define OHCI_INTERRUPT_ENABLE 0x10 -#define OHCI_INTERRUPT_DISABLE 0x14 -#define OHCI_HCCA 0x18 -#define OHCI_PERIOD_CURRENT_ED 0x1c -#define OHCI_CONTROL_HEAD_ED 0x20 -#define OHCI_CONTROL_CURRENT_ED 0x24 -#define OHCI_BULK_HEAD_ED 0x28 -#define OHCI_BULK_CURRENT_ED 0x2c -#define OHCI_DONE_HEAD 0x30 -#define OHCI_FM_INTERVAL 0x34 -#define OHCI_GET_IVAL(s) ((s) & 0x3fff) -#define OHCI_GET_FSMPS(s) (((s) >> 16) & 0x7fff) -#define OHCI_FIT 0x80000000 -#define OHCI_FM_REMAINING 0x38 -#define OHCI_FM_NUMBER 0x3c -#define OHCI_PERIODIC_START 0x40 -#define OHCI_LS_THRESHOLD 0x44 -#define OHCI_RH_DESCRIPTOR_A 0x48 -#define OHCI_GET_NDP(s) ((s) & 0xff) -#define OHCI_PSM 0x0100 /* Power Switching Mode */ -#define OHCI_NPS 0x0200 /* No Power Switching */ -#define OHCI_DT 0x0400 /* Device Type */ -#define OHCI_OCPM 0x0800 /* Overcurrent Protection Mode */ -#define OHCI_NOCP 0x1000 /* No Overcurrent Protection */ -#define OHCI_GET_POTPGT(s) ((s) >> 24) -#define OHCI_RH_DESCRIPTOR_B 0x4c -#define OHCI_RH_STATUS 0x50 -#define OHCI_LPS 0x00000001 /* Local Power Status */ -#define OHCI_OCI 0x00000002 /* OverCurrent Indicator */ -#define OHCI_DRWE 0x00008000 /* Device Remote Wakeup Enable */ -#define OHCI_LPSC 0x00010000 /* Local Power Status Change */ -#define OHCI_CCIC 0x00020000 /* OverCurrent Indicator - * Change */ -#define OHCI_CRWE 0x80000000 /* Clear Remote Wakeup Enable */ -#define OHCI_RH_PORT_STATUS(n) (0x50 + ((n)*4)) /* 1 based indexing */ - -#define OHCI_LES (OHCI_PLE | OHCI_IE | OHCI_CLE | OHCI_BLE) -#define OHCI_ALL_INTRS (OHCI_SO | OHCI_WDH | OHCI_SF | \ - OHCI_RD | OHCI_UE | OHCI_FNO | \ - OHCI_RHSC | OHCI_OC) -#define OHCI_NORMAL_INTRS (OHCI_WDH | OHCI_RD | OHCI_UE | OHCI_RHSC) - -#define OHCI_FSMPS(i) (((i-210)*6/7) << 16) -#define OHCI_PERIODIC(i) ((i)*9/10) - #define OHCI_NO_INTRS 32 #define OHCI_HCCA_SIZE 256 Modified: head/sys/dev/usb/controller/ohci_atmelarm.c ============================================================================== --- head/sys/dev/usb/controller/ohci_atmelarm.c Thu Oct 15 19:50:00 2009 (r198150) +++ head/sys/dev/usb/controller/ohci_atmelarm.c Thu Oct 15 20:07:08 2009 (r198151) @@ -56,6 +56,7 @@ __FBSDID("$FreeBSD$"); #include <dev/usb/usb_controller.h> #include <dev/usb/usb_bus.h> #include <dev/usb/controller/ohci.h> +#include <dev/usb/controller/ohcireg.h> #include <sys/rman.h> Modified: head/sys/dev/usb/controller/ohci_pci.c ============================================================================== --- head/sys/dev/usb/controller/ohci_pci.c Thu Oct 15 19:50:00 2009 (r198150) +++ head/sys/dev/usb/controller/ohci_pci.c Thu Oct 15 20:07:08 2009 (r198151) @@ -81,6 +81,7 @@ __FBSDID("$FreeBSD$"); #include <dev/usb/usb_bus.h> #include <dev/usb/usb_pci.h> #include <dev/usb/controller/ohci.h> +#include <dev/usb/controller/ohcireg.h> #define PCI_OHCI_VENDORID_ACERLABS 0x10b9 #define PCI_OHCI_VENDORID_AMD 0x1022 Added: head/sys/dev/usb/controller/ohcireg.h ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/dev/usb/controller/ohcireg.h Thu Oct 15 20:07:08 2009 (r198151) @@ -0,0 +1,131 @@ +/* $FreeBSD$ */ +/*- + * Copyright (c) 1998 The NetBSD Foundation, Inc. + * All rights reserved. + * + * This code is derived from software contributed to The NetBSD Foundation + * by Lennart Augustsson (lennart@augustsson.net) at + * Carlstedt Research & Technology. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the NetBSD + * Foundation, Inc. and its contributors. + * 4. Neither the name of The NetBSD Foundation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _OHCIREG_H_ +#define _OHCIREG_H_ + +/* PCI config registers */ +#define PCI_CBMEM 0x10 /* configuration base memory */ +#define PCI_INTERFACE_OHCI 0x10 + +/* OHCI registers */ +#define OHCI_REVISION 0x00 /* OHCI revision */ +#define OHCI_REV_LO(rev) ((rev) & 0xf) +#define OHCI_REV_HI(rev) (((rev)>>4) & 0xf) +#define OHCI_REV_LEGACY(rev) ((rev) & 0x100) +#define OHCI_CONTROL 0x04 +#define OHCI_CBSR_MASK 0x00000003 /* Control/Bulk Service Ratio */ +#define OHCI_RATIO_1_1 0x00000000 +#define OHCI_RATIO_1_2 0x00000001 +#define OHCI_RATIO_1_3 0x00000002 +#define OHCI_RATIO_1_4 0x00000003 +#define OHCI_PLE 0x00000004 /* Periodic List Enable */ +#define OHCI_IE 0x00000008 /* Isochronous Enable */ +#define OHCI_CLE 0x00000010 /* Control List Enable */ +#define OHCI_BLE 0x00000020 /* Bulk List Enable */ +#define OHCI_HCFS_MASK 0x000000c0 /* HostControllerFunctionalStat + * e */ +#define OHCI_HCFS_RESET 0x00000000 +#define OHCI_HCFS_RESUME 0x00000040 +#define OHCI_HCFS_OPERATIONAL 0x00000080 +#define OHCI_HCFS_SUSPEND 0x000000c0 +#define OHCI_IR 0x00000100 /* Interrupt Routing */ +#define OHCI_RWC 0x00000200 /* Remote Wakeup Connected */ +#define OHCI_RWE 0x00000400 /* Remote Wakeup Enabled */ +#define OHCI_COMMAND_STATUS 0x08 +#define OHCI_HCR 0x00000001 /* Host Controller Reset */ +#define OHCI_CLF 0x00000002 /* Control List Filled */ +#define OHCI_BLF 0x00000004 /* Bulk List Filled */ +#define OHCI_OCR 0x00000008 /* Ownership Change Request */ +#define OHCI_SOC_MASK 0x00030000 /* Scheduling Overrun Count */ +#define OHCI_INTERRUPT_STATUS 0x0c +#define OHCI_SO 0x00000001 /* Scheduling Overrun */ +#define OHCI_WDH 0x00000002 /* Writeback Done Head */ +#define OHCI_SF 0x00000004 /* Start of Frame */ +#define OHCI_RD 0x00000008 /* Resume Detected */ +#define OHCI_UE 0x00000010 /* Unrecoverable Error */ +#define OHCI_FNO 0x00000020 /* Frame Number Overflow */ +#define OHCI_RHSC 0x00000040 /* Root Hub Status Change */ +#define OHCI_OC 0x40000000 /* Ownership Change */ +#define OHCI_MIE 0x80000000 /* Master Interrupt Enable */ +#define OHCI_INTERRUPT_ENABLE 0x10 +#define OHCI_INTERRUPT_DISABLE 0x14 +#define OHCI_HCCA 0x18 +#define OHCI_PERIOD_CURRENT_ED 0x1c +#define OHCI_CONTROL_HEAD_ED 0x20 +#define OHCI_CONTROL_CURRENT_ED 0x24 +#define OHCI_BULK_HEAD_ED 0x28 +#define OHCI_BULK_CURRENT_ED 0x2c +#define OHCI_DONE_HEAD 0x30 +#define OHCI_FM_INTERVAL 0x34 +#define OHCI_GET_IVAL(s) ((s) & 0x3fff) +#define OHCI_GET_FSMPS(s) (((s) >> 16) & 0x7fff) +#define OHCI_FIT 0x80000000 +#define OHCI_FM_REMAINING 0x38 +#define OHCI_FM_NUMBER 0x3c +#define OHCI_PERIODIC_START 0x40 +#define OHCI_LS_THRESHOLD 0x44 +#define OHCI_RH_DESCRIPTOR_A 0x48 +#define OHCI_GET_NDP(s) ((s) & 0xff) +#define OHCI_PSM 0x0100 /* Power Switching Mode */ +#define OHCI_NPS 0x0200 /* No Power Switching */ +#define OHCI_DT 0x0400 /* Device Type */ +#define OHCI_OCPM 0x0800 /* Overcurrent Protection Mode */ +#define OHCI_NOCP 0x1000 /* No Overcurrent Protection */ +#define OHCI_GET_POTPGT(s) ((s) >> 24) +#define OHCI_RH_DESCRIPTOR_B 0x4c +#define OHCI_RH_STATUS 0x50 +#define OHCI_LPS 0x00000001 /* Local Power Status */ +#define OHCI_OCI 0x00000002 /* OverCurrent Indicator */ +#define OHCI_DRWE 0x00008000 /* Device Remote Wakeup Enable */ +#define OHCI_LPSC 0x00010000 /* Local Power Status Change */ +#define OHCI_CCIC 0x00020000 /* OverCurrent Indicator + * Change */ +#define OHCI_CRWE 0x80000000 /* Clear Remote Wakeup Enable */ +#define OHCI_RH_PORT_STATUS(n) (0x50 + ((n)*4)) /* 1 based indexing */ + +#define OHCI_LES (OHCI_PLE | OHCI_IE | OHCI_CLE | OHCI_BLE) +#define OHCI_ALL_INTRS (OHCI_SO | OHCI_WDH | OHCI_SF | \ + OHCI_RD | OHCI_UE | OHCI_FNO | \ + OHCI_RHSC | OHCI_OC) +#define OHCI_NORMAL_INTRS (OHCI_WDH | OHCI_RD | OHCI_UE | OHCI_RHSC) + +#define OHCI_FSMPS(i) (((i-210)*6/7) << 16) +#define OHCI_PERIODIC(i) ((i)*9/10) + +#endif /* _OHCIREG_H_ */ Modified: head/sys/dev/usb/controller/uhci.c ============================================================================== --- head/sys/dev/usb/controller/uhci.c Thu Oct 15 19:50:00 2009 (r198150) +++ head/sys/dev/usb/controller/uhci.c Thu Oct 15 20:07:08 2009 (r198151) @@ -75,6 +75,7 @@ __FBSDID("$FreeBSD$"); #include <dev/usb/usb_controller.h> #include <dev/usb/usb_bus.h> #include <dev/usb/controller/uhci.h> +#include <dev/usb/controller/uhcireg.h> #define alt_next next #define UHCI_BUS2SC(bus) \ Modified: head/sys/dev/usb/controller/uhci.h ============================================================================== --- head/sys/dev/usb/controller/uhci.h Thu Oct 15 19:50:00 2009 (r198150) +++ head/sys/dev/usb/controller/uhci.h Thu Oct 15 20:07:08 2009 (r198151) @@ -41,64 +41,6 @@ #define UHCI_MAX_DEVICES MIN(USB_MAX_DEVICES, 128) -/* PCI config registers */ -#define PCI_USBREV 0x60 /* USB protocol revision */ -#define PCI_USB_REV_MASK 0xff -#define PCI_USB_REV_PRE_1_0 0x00 -#define PCI_USB_REV_1_0 0x10 -#define PCI_USB_REV_1_1 0x11 -#define PCI_LEGSUP 0xc0 /* Legacy Support register */ -#define PCI_LEGSUP_USBPIRQDEN 0x2000 /* USB PIRQ D Enable */ -#define PCI_CBIO 0x20 /* configuration base IO */ -#define PCI_INTERFACE_UHCI 0x00 - -/* UHCI registers */ -#define UHCI_CMD 0x00 -#define UHCI_CMD_RS 0x0001 -#define UHCI_CMD_HCRESET 0x0002 -#define UHCI_CMD_GRESET 0x0004 -#define UHCI_CMD_EGSM 0x0008 -#define UHCI_CMD_FGR 0x0010 -#define UHCI_CMD_SWDBG 0x0020 -#define UHCI_CMD_CF 0x0040 -#define UHCI_CMD_MAXP 0x0080 -#define UHCI_STS 0x02 -#define UHCI_STS_USBINT 0x0001 -#define UHCI_STS_USBEI 0x0002 -#define UHCI_STS_RD 0x0004 -#define UHCI_STS_HSE 0x0008 -#define UHCI_STS_HCPE 0x0010 -#define UHCI_STS_HCH 0x0020 -#define UHCI_STS_ALLINTRS 0x003f -#define UHCI_INTR 0x04 -#define UHCI_INTR_TOCRCIE 0x0001 -#define UHCI_INTR_RIE 0x0002 -#define UHCI_INTR_IOCE 0x0004 -#define UHCI_INTR_SPIE 0x0008 -#define UHCI_FRNUM 0x06 -#define UHCI_FRNUM_MASK 0x03ff -#define UHCI_FLBASEADDR 0x08 -#define UHCI_SOF 0x0c -#define UHCI_SOF_MASK 0x7f -#define UHCI_PORTSC1 0x010 -#define UHCI_PORTSC2 0x012 -#define UHCI_PORTSC_CCS 0x0001 -#define UHCI_PORTSC_CSC 0x0002 -#define UHCI_PORTSC_PE 0x0004 -#define UHCI_PORTSC_POEDC 0x0008 -#define UHCI_PORTSC_LS 0x0030 -#define UHCI_PORTSC_LS_SHIFT 4 -#define UHCI_PORTSC_RD 0x0040 -#define UHCI_PORTSC_LSDA 0x0100 -#define UHCI_PORTSC_PR 0x0200 -#define UHCI_PORTSC_OCI 0x0400 -#define UHCI_PORTSC_OCIC 0x0800 -#define UHCI_PORTSC_SUSP 0x1000 - -#define URWMASK(x) ((x) & (UHCI_PORTSC_SUSP | \ - UHCI_PORTSC_PR | UHCI_PORTSC_RD | \ - UHCI_PORTSC_PE)) - #define UHCI_FRAMELIST_COUNT 1024 /* units */ #define UHCI_FRAMELIST_ALIGN 4096 /* bytes */ @@ -118,8 +60,6 @@ typedef uint32_t uhci_physaddr_t; #define UHCI_PTR_QH 0x00000002 #define UHCI_PTR_VF 0x00000004 -#define UHCI_QH_REMOVE_DELAY 5 /* us - QH remove delay */ - /* * The Queue Heads (QH) and Transfer Descriptors (TD) are accessed by * both the CPU and the USB-controller which run concurrently. Great Modified: head/sys/dev/usb/controller/uhci_pci.c ============================================================================== --- head/sys/dev/usb/controller/uhci_pci.c Thu Oct 15 19:50:00 2009 (r198150) +++ head/sys/dev/usb/controller/uhci_pci.c Thu Oct 15 20:07:08 2009 (r198151) @@ -81,6 +81,7 @@ __FBSDID("$FreeBSD$"); #include <dev/usb/usb_bus.h> #include <dev/usb/usb_pci.h> #include <dev/usb/controller/uhci.h> +#include <dev/usb/controller/uhcireg.h> #define PCI_UHCI_VENDORID_INTEL 0x8086 #define PCI_UHCI_VENDORID_VIA 0x1106 Added: head/sys/dev/usb/controller/uhcireg.h ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/dev/usb/controller/uhcireg.h Thu Oct 15 20:07:08 2009 (r198151) @@ -0,0 +1,100 @@ +/* $FreeBSD$ */ +/*- + * Copyright (c) 1998 The NetBSD Foundation, Inc. + * All rights reserved. + * + * This code is derived from software contributed to The NetBSD Foundation + * by Lennart Augustsson (lennart@augustsson.net) at + * Carlstedt Research & Technology. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the NetBSD + * Foundation, Inc. and its contributors. + * 4. Neither the name of The NetBSD Foundation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _UHCIREG_H_ +#define _UHCIREG_H_ + +/* PCI config registers */ +#define PCI_USBREV 0x60 /* USB protocol revision */ +#define PCI_USB_REV_MASK 0xff +#define PCI_USB_REV_PRE_1_0 0x00 +#define PCI_USB_REV_1_0 0x10 +#define PCI_USB_REV_1_1 0x11 +#define PCI_LEGSUP 0xc0 /* Legacy Support register */ +#define PCI_LEGSUP_USBPIRQDEN 0x2000 /* USB PIRQ D Enable */ +#define PCI_CBIO 0x20 /* configuration base IO */ +#define PCI_INTERFACE_UHCI 0x00 + +/* UHCI registers */ +#define UHCI_CMD 0x00 +#define UHCI_CMD_RS 0x0001 +#define UHCI_CMD_HCRESET 0x0002 +#define UHCI_CMD_GRESET 0x0004 +#define UHCI_CMD_EGSM 0x0008 +#define UHCI_CMD_FGR 0x0010 +#define UHCI_CMD_SWDBG 0x0020 +#define UHCI_CMD_CF 0x0040 +#define UHCI_CMD_MAXP 0x0080 +#define UHCI_STS 0x02 +#define UHCI_STS_USBINT 0x0001 +#define UHCI_STS_USBEI 0x0002 +#define UHCI_STS_RD 0x0004 +#define UHCI_STS_HSE 0x0008 +#define UHCI_STS_HCPE 0x0010 +#define UHCI_STS_HCH 0x0020 +#define UHCI_STS_ALLINTRS 0x003f +#define UHCI_INTR 0x04 +#define UHCI_INTR_TOCRCIE 0x0001 +#define UHCI_INTR_RIE 0x0002 +#define UHCI_INTR_IOCE 0x0004 +#define UHCI_INTR_SPIE 0x0008 +#define UHCI_FRNUM 0x06 +#define UHCI_FRNUM_MASK 0x03ff +#define UHCI_FLBASEADDR 0x08 +#define UHCI_SOF 0x0c +#define UHCI_SOF_MASK 0x7f +#define UHCI_PORTSC1 0x010 +#define UHCI_PORTSC2 0x012 +#define UHCI_PORTSC_CCS 0x0001 +#define UHCI_PORTSC_CSC 0x0002 +#define UHCI_PORTSC_PE 0x0004 +#define UHCI_PORTSC_POEDC 0x0008 +#define UHCI_PORTSC_LS 0x0030 +#define UHCI_PORTSC_LS_SHIFT 4 +#define UHCI_PORTSC_RD 0x0040 +#define UHCI_PORTSC_LSDA 0x0100 +#define UHCI_PORTSC_PR 0x0200 +#define UHCI_PORTSC_OCI 0x0400 +#define UHCI_PORTSC_OCIC 0x0800 +#define UHCI_PORTSC_SUSP 0x1000 + +#define URWMASK(x) ((x) & (UHCI_PORTSC_SUSP | \ + UHCI_PORTSC_PR | UHCI_PORTSC_RD | \ + UHCI_PORTSC_PE)) + +#endif /* _UHCIREG_H_ */
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200910152007.n9FK78cG083259>