Date: Wed, 28 May 2003 17:35:01 +0800 From: "David Xu" <davidxu@freebsd.org> To: "Petri Helenius" <pete@he.iki.fi>, "Daniel Eischen" <eischen@pcnet5.pcnet.com> Cc: freebsd-threads@freebsd.org Subject: Re: malloc(): error: recursive call Message-ID: <012901c324fc$6aa19a00$f001a8c0@davidw2k> References: <Pine.GSO.4.10.10305271924010.1039-100000@pcnet5.pcnet.com> <3ED4644A.6050401@he.iki.fi> <00ff01c324f7$7571cc20$f001a8c0@davidw2k> <049101c324fa$436a9bf0$812a40c1@PETEX31>
next in thread | previous in thread | raw e-mail | index | archive | help
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD 5.1-BETA #16: Mon May 26 16:57:01 CST 2003
=
davidxu@davidbsd.viasoft.com.cn:/usr/home/davidxu/src/sys/i386/compile/nw=
Preloaded elf kernel "/boot/kernel/kernel" at 0xc049c000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 501139032 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (501.14-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x665 Stepping =3D 5
=
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR>
real memory =3D 469696512 (447 MB)
avail memory =3D 451170304 (430 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fddc0
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on =
motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem =
0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f at device =
7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq =
10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem =
0xd9000000-0xd90000ff irq 12 at device 10.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect =
mode
rl0: Ethernet address: 00:e0:4c:6b:dc:5e
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port =
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0a03> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounters tick every 10.000 msec
ad0: 14655MB <Maxtor 31536H2> [29777/16/63] at ata0-master UDMA33
ad2: 14655MB <Maxtor 31536U2> [29777/16/63] at ata1-master UDMA33
acd0: CDROM <SAMSUNG CD-ROM SC-140H> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s3a
----- Original Message -----=20
From: "Petri Helenius" <pete@he.iki.fi>
To: "David Xu" <davidxu@freebsd.org>; "Daniel Eischen" =
<eischen@pcnet5.pcnet.com>
Cc: "Daniel Eischen" <eischen@pcnet1.pcnet.com>; =
<freebsd-threads@freebsd.org>
Sent: Wednesday, May 28, 2003 5:19 PM
Subject: Re: malloc(): error: recursive call
>=20
> Could you send the relevant data from boot messages so we could see if =
it?s=20
> a CPU or platform specific issue.
>=20
> The box the cut&paste was from is;
> FreeBSD 5.1-BETA #7: Sat May 24 10:49:11 GMT 2003
> root@kompak.vuokselantie10.fi:/usr/src/sys/i386/compile/EMTEST
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc04cf000.
> Timecounter "i8254" frequency 1193182 Hz
> Timecounter "TSC" frequency 598009575 Hz
> CPU: Intel Celeron (598.01-MHz 686-class CPU)
> Origin =3D "GenuineIntel" Id =3D 0x683 Stepping =3D 3
> =
Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory =3D 267386880 (255 MB)
> avail memory =3D 254566400 (242 MB)
> Pentium Pro MTRR support enabled
>=20
> Pete
>=20
> >Unfortunatly I have run your test program for five minutes without =
problem.
> >
> >David Xu
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?012901c324fc$6aa19a00$f001a8c0>