Date: Tue, 21 Jan 2014 16:25:55 GMT From: Derban Dmitri <derbandn@yahoo.com> To: freebsd-gnats-submit@FreeBSD.org Subject: usb/185968: PocketBook Pro 912 USB connection problem Message-ID: <201401211625.s0LGPtYY010198@oldred.freebsd.org> Resent-Message-ID: <201401211630.s0LGU0ov041878@freefall.freebsd.org>
index | next in thread | raw e-mail
>Number: 185968
>Category: usb
>Synopsis: PocketBook Pro 912 USB connection problem
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-usb
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Jan 21 16:30:00 UTC 2014
>Closed-Date:
>Last-Modified:
>Originator: Derban Dmitri
>Release: FreeBSD 9.1-RELEASE-p7 amd64
>Organization:
>Environment:
FreeBSD admin 9.1-RELEASE-p7 FreeBSD 9.1-RELEASE-p7 #0: Mon Sep 9 21:34:37 UTC 2013 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>Description:
When connecting PocketBook 912 Pro to USB port, system shows the following output:
Jan 17 19:24:52 admin kernel: ugen0.3: <PB> at usbus0
Jan 17 19:24:52 admin kernel: umass0: <PB PocketBook, class 0/0, rev 2.00/3.24, addr 3> on usbus0
Jan 17 19:24:52 admin kernel: umass0: SCSI over Bulk-Only; quirks = 0x0100
Jan 17 19:24:52 admin kernel: umass0:5:0:-1: Attached to scbus5
It seems like system can't recognize it as mass storage device. As result, mount is impossible.
usbconfig dump_device_desc
ugen0.3: <PocketBook PB> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x0525
idProduct = 0xa4a5
bcdDevice = 0x0324
iManufacturer = 0x0001 <retrieving string failed>
iProduct = 0x0002 <retrieving string failed>
iSerialNumber = 0x0003 <retrieving string failed>
bNumConfigurations = 0x0001
>How-To-Repeat:
just connect PocketBook 912 Pro to USB port
>Fix:
1 Remove device from port;
2 run the following command as root: usbconfig add_quirk UQ_MSC_NO_SYNC_CACHE;
3 attach device.
System messages after command above and device attach:
Jan 17 19:27:05 admin kernel: ugen0.3: <PB> at usbus0
Jan 17 19:27:05 admin kernel: umass0: <Mass Storage> on usbus0
Jan 17 19:27:05 admin kernel: umass0: SCSI over Bulk-Only; quirks = 0x4000
Jan 17 19:27:05 admin kernel: umass0:5:0:-1: Attached to scbus5
Jan 17 19:27:05 admin kernel: da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
Jan 17 19:27:05 admin kernel: da0: < PB 0324> Removable Direct Access SCSI-2 device
Jan 17 19:27:05 admin kernel: da0: 40.000MB/s transfers
Jan 17 19:27:05 admin kernel: da0: 954MB (1955232 512 byte sectors: 64H 32S/T 954C)
For now it can be mounted as DOS fs.
>Release-Note:
>Audit-Trail:
>Unformatted:
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201401211625.s0LGPtYY010198>