Date: Tue, 27 Oct 2009 05:23:35 -0400 From: Jerry <gesbbb@yahoo.com> To: freebsd-questions@freebsd.org Subject: Re: Bad sectors: how bad can it be Message-ID: <20091027052335.65cae6b8@scorpio.seibercom.net> In-Reply-To: <4AE6AC47.9070800@infracaninophile.co.uk> References: <FAF67E79-922C-4F54-8BE1-2C3ED88FD3CD@yahoo.fr> <4AE6AC47.9070800@infracaninophile.co.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 27 Oct 2009 08:16:07 +0000
Matthew Seaman <m.seaman@infracaninophile.co.uk> replied:
>Gr_newald Micha_l wrote:
>> Dear list,
>>
>> after an incorrect power-off of my FreeBSD system, it does not boot
>> any more, BTX stops even before showing the cute beastie menu.
>> Starting the machine by other means, I found that the hard-drive is
>> installed on has bad sectors. I am looking for advices on how to
>> recover from this, if possible.
>>
>> Basically the question is: shall I discard my hard-drive with
>> bad-sectors, or can I continue using it?
>>
>> The Linux system I use to diagnose this says:
>>
>> hdb: media error (bad sector): status=0x51 { DriveReady
>> SeekComplete Error }
>> hdb: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
>> ...
>> Buffer I/O error on device hdb, logical block 1663200
>>
>> etc.
>>
>> Since I use computers (1992) these are my first bad sectors :) (on
>> hard drives, taking floppies into account is no fun!). I hence have
>> several questions:
>> -- is it possible to let these sectors?
>> -- to which extents a hard-drive with bad sectors is usable?
>> -- while the apparition of these bad sectors coincide with an
>> incorrect power-off, are the two events related? The machine
>> suffered plenty improper power-offs (or many), in the last years and
>> did not react so badly!
>
>Yes. Back up your data and replace that disk ASAP. It's toast.
>
>All disks come with a built-in set of spare sectors, which the firmware
>will automatically substitute for any sectors that go bad. If you get
>to the state where the OS is seeing bad blocks, it means the disk has
>run out of spare sectors. It's worn out.
A friend of mine had a lap-top that exhibited similar behavior. After
trying the usual methods, he used SpinRite
<http://www.grc.com/intro.htm>; at its highest level on the disk. It
ran for 97 hours; however, when completed, the disk worked like new.
While replacing the drive is certainly a good idea, if you need
information on it that you cannot otherwise extract, you might want to
try another method.
--
Jerry
gesbbb@yahoo.com
|::::=======
|::::=======
|===========
|===========
|
Never pay a compliment as if expecting a receipt.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091027052335.65cae6b8>