Date: Tue, 25 Mar 2003 21:03:29 +0100 (CET) From: Xander <x+freebsd-gnats@surfnet.nl> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/50297: QUIRK: Apacer Handydrive 256M USB Disk Message-ID: <200303252003.h2PK3TIj008910@triplex.phaze-III.sec.nl>
index | next in thread | raw e-mail
>Number: 50297
>Category: kern
>Synopsis: QUIRK: Apacer Handydrive 256M USB Disk
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: change-request
>Submitter-Id: current-users
>Arrival-Date: Tue Mar 25 12:20:15 PST 2003
>Closed-Date:
>Last-Modified:
>Originator: Xander
>Release: FreeBSD 4.8-RC i386
>Organization:
SURFnet
>Environment:
System: FreeBSD triplex.phaze-III.sec.nl 5.0-CURRENT FreeBSD 5.0-CURRENT #1: Sat Mar 22 22:27:12 CET 2003 root@triplex.phaze-III.sec.nl:/extra/usr/obj/usr/test/src/sys/X i386
>Description:
NOTE: the above environment is my current OS, the Quirk for this particular version of
the Apacer Handydrive was needed when this box was running 4-STABLE a few
months ago. On 5-CURRENT no quirk seems to be needed, on 4.x I used the
included quirk. Note that this USB disk has a different identifying string
(as compared with the other Apacer Quirk in pr/43627). I copied that quirk
and changed the vendor/product strings. Both quirks were needed december
2002 on 4-stable.
Note that the vendor string actually is empty which might be a problem. The
output below is from my laptop running -current, I currently don't have
access to a box with both USB and 4.8-RC so additional testing on 4.x will
be a bit hard. Sorry about that.
info from 5-current:
# dmesg
umass0: vendor 0x0d7d USB Disk, rev 1.10/1.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: < USB DISK 2.08> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 248MB (507904 512 byte sectors: 64H 32S/T 248C)
(da0:umass-sim0:0:0:0): READ(6)/WRITE(6) not supported, increasing
minimum_cmd_size to 10.
# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x0000), rev 1.00
port 1 addr 2: full speed, power 100 mA, config 1, USB Disk(0x0100), vendor
0x0d7d(0x0d7d), rev 1.00
port 2 powered
# camcontrol inquiry da0
pass0: < USB DISK 2.08> Removable Direct Access SCSI-0 device
pass0: Serial Number
pass0: 1.000MB/s transfers
>How-To-Repeat:
>Fix:
Add something like below to scsi_da.c:
{
/*
* Apacer HandyDrive 256M
*/
{T_DIRECT, SIP_MEDIA_REMOVABLE, "", "USB DISK", "*"},
/*quirks*/ DA_Q_NO_6_BYTE|DA_Q_NO_SYNC_CACHE
},
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200303252003.h2PK3TIj008910>