Date: Mon, 23 Aug 2010 20:05:32 +0200 From: Jakub Nowacki <poczta.jnowacki@gmail.com> To: freebsd-questions@freebsd.org Subject: How to configure ppp connection Message-ID: <201008232005.33481.poczta.jnowacki@gmail.com>
next in thread | raw e-mail | index | archive | help
Hello!
(First of all - forgive me my language, I'am form Poland)
I'am new in FreeBSD, but I have used Linux for a few year.
I have got mobile modem: Huawei e1750c. As far as I know it is supported by
u3g driver. On Linux I use wvdial as a dialer, and there are no problems with
connection. On FreeBSD I just can't find propper ppp.conf, however I spend many
hours googling and trying some.
-----------------------------------------------------------------------------------
There are data needed to establish connection:
ASP: "internet"
user: ""
password: ""
phone: *99#
-----------------------------------------------------------------------------------
my wvdial (Linux) config file:
Modem = /dev/ttyUSB0
Baud = 57600
Init1 = ATH
Init2 = ATE1
Init3 = AT+CGDCONT=1,"IP","internet"
Dial Command = ATD
Phone = *99#
Stupid mode = yes
Username = "blank"
Password = "blank"
Auto DNS = yes
-----------------------------------------------------------------------------------
There is one of ppp.conf I tried:
default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)
set device /dev/cuaU0.0
set speed 115200
set dial "ABORT BUSY TIMEOUT 2 \
\"\" \
AT OK-AT-OK \
AT+CFUN=1 OK-AT-OK \
AT+CMEE=2 OK-AT-OK \
AT+CSQ OK \
AT+CGDCONT=1,\\\"IP\\\",\\\"internet\\\" OK \
AT+CGACT? OK-AT-OK \
AT+CGATT? OK \
AT+CGCLASS? OK \
AT+COPS? OK \
ATD*99# CONNECT"
set timeout 180
enable dns
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR
-----------------------------------------------------------------------------------
After i plug modem i got:
ugen4.2: <HUAWEI Technology> at usbus4
ugen4.2: <HUAWEI Technology> at usbus4 (disconnected)
ugen4.2: <HUAWEI Technology> at usbus4
[b]u3g0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00, addr 2>
on usbus4
u3g0: Found 3 ports.[/b]
umass0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00, addr 2> on
usbus4
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
umass1: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00, addr 2> on
usbus4
umass1: SCSI over Bulk-Only; quirks = 0x0000
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
cd0 at umass-sim0 bus 0 scbus0 target 0 lun 0
cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
umass1:1:1:-1: Attached to scbus1
(probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI status: Check Condition
(probe0:umass-sim1:1:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da0 at umass-sim1 bus 1 scbus1 target 0 lun 0
da0: <HUAWEI SD Storage 2.31> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
-----------------------------------------------------------------------------------
when i try to use "ppp default" and then "dial" i got:
# ppp default
Loading /lib/libalias_cuseeme.so
Loading /lib/libalias_ftp.so
Loading /lib/libalias_irc.so
Loading /lib/libalias_nbt.so
Loading /lib/libalias_pptp.so
Loading /lib/libalias_skinny.so
Loading /lib/libalias_smedia.so
Working in interactive mode
Using interface: tun0
Warning: Bad label in /etc/ppp/ppp.conf (line 2) - missing colon
Warning: Bad label in /etc/ppp/ppp.conf (line 2) - missing colon
ppp ON localhost> dial
Warning: deflink: /dev/cuad1: Bad file descriptor
Warning: deflink: /dev/cuad0: Bad file descriptor
-----------------------------------------------------------------------------------
Nothing happens, there is still no connection.
Some device nodes are created after I plug a modem. There is diff result
of listed /dev pre and post pluging:
jakub@iac-deb:~$ diff /media/disk/pre_dev /media/disk/post_dev
17a18
> cd0
20a22,30
> cuaU0.0
> cuaU0.0.init
> cuaU0.0.lock
> cuaU0.1
> cuaU0.1.init
> cuaU0.1.lock
> cuaU0.2
> cuaU0.2.init
> cuaU0.2.lock
23a34
> da0
43a55,56
> pass0
> pass1
51a65,73
> ttyU0.0
> ttyU0.0.init
> ttyU0.0.lock
> ttyU0.1
> ttyU0.1.init
> ttyU0.1.lock
> ttyU0.2
> ttyU0.2.init
> ttyU0.2.lock
77a100
> ugen4.2
-----------------------------------------------------------------------------------
I would be very gratefull if You could help me to configure ppp.conf.
FreeBSD without internt connection is useless for me... :(
Thanks,
Jakub Nowacki.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201008232005.33481.poczta.jnowacki>