Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 18 Apr 2001 15:56:39 +0100
From:      "Jonathan Belson" <jon@witchspace.com>
To:        "Sergey A. Osokin" <osa@freebsd.org.ru>, "Hervey Wilson" <herveyw@dynamic-cast.com>
Cc:        <bjoern@loenneker.com>, <stable@FreeBSD.ORG>
Subject:   Re: HPT366 problems
Message-ID:  <001f01c0c817$ca5d77a0$650e850a@innovisiongroup.com>
References:  <Pine.BSF.4.33.0104080413010.14480-100000@unix-shells.com> <3ACFDF76.62E58A15@acm.org> <20010409151016.A75461@freebsd.org.ru> <007b01c0c106$792bebe0$0101a8c0@chillipepper> <20010409191526.A77548@freebsd.org.ru> <20010418172943.D74492@freebsd.org.ru>

next in thread | previous in thread | raw e-mail | index | archive | help
Hiya


> > > I had an IBM 30Gb (DTLA307030) ATA/100 attached to the HPT366 on my
Abit BP6
> > > and had no end of trouble with it. I gave up and moved it to the
UDMA/33
> > > controller. When the disk developed a bad sector, I exchanged it and
got a
> > > Western Digital ATA/100 which works just fine on HPT366. So, I do this
> > > there's an issue with HPT366 and IBM ATA/100 drives.
> >
> > AFAIK some IBMs DTLA models have problems with some
chipsets/controllers.
> > Please see following URL: http://213.219.40.69/28030104.htm
>
> New information about DTLAs:
> http://www.theinquirer.net/18040101.htm

I don't know if this is related at all, but when I upgraded my machine to an
Athlon with
an Abit KT7A motherboard (not the RAID version so no HPT366) I couldn't boot
from my FreeBSD partition -  when the boot sequence tried to mount the
filesystems,
it stalled with endless 'timeout - resetting' errors.  The harddrive was an
IBM-DJNA
with a VT686A controller (ATA-100).

Someone suggested I flash upgrade my mb BIOS but I ended up using it as an
excuse
to upgrade my harddrive - I got a Maxtor, which worked without any problems.


--
C-YA
Jon

http://www.witchspace.com




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001f01c0c817$ca5d77a0$650e850a>