Date: Sun, 03 Dec 2000 10:30:50 -0500 From: Co-op <sparqy2@home.com> To: freebsd-stable@freebsd.org, freebsd-bugs@freebsd.org Subject: Old AHA-2940 problem [was: kernel panics in 4.2] Message-ID: <3A2A6728.7D6698BA@home.com> References: <Pine.GSO.4.21.0012011654230.7810-100000@rac2.wam.umd.edu> <3A293612.54447A5C@home.com> <034501c05c95$b227f720$0b6cffc8@infolink.com.br>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks Antonio, Looking at the 4.2 release notes, the ahc driver was updated. Wonder if the kernel guys made changes that made supporting the old bios's impossible. A reinstall of 4.2 fails to configure /dev/sa0 though it appears to recognize the 2940 Bios version 1.11 1994. Would it be possible for someone to check on this either way. If it's a driver fix, fine. If I need to go hunting for a new SCSI controller, so be it...just can't afford to sit too long without backups. Antonio wrote: > Hello, > > I had similar problems. The only way I could find to get rid of this > problems was changing the Adaptec Adapter to another with newer bios (my > previous board was PCI2940u, 1994's bios and now I have a 2940w with 1996's > bios). All the problems are gone. > > Sorry not to be helpful, but it was the only way to me. > > Best Regards, > Antonio > ----- Original Message ----- > From: "Co-op" <sparqy2@home.com> > To: <freebsd-stable@freebsd.org> > Sent: Saturday, December 02, 2000 3:49 PM > Subject: Re: kernel panics in 4.2 > > > > > Hey Ken and gang, > > I am experiencing somewhat similar issues with an older PCI 2940 > Fast/Narrow > > that has been operational across 3-stable and 4.1-release. After moving > > to 4.2-Release, I experienced "garbaged" screen scroll that seemed to > occur at the > > point that the kernel hit the 2940 device. From what I could decipher > > during the scrolling, it read something like this: (dmesg doesn't catch > this) > > > > Sequence "...?..." SCB "..?.."memory parity error at sequence add "..?.." > 5 0x1 > > > > The odd thing is that this occurs on COLD boots only...if I reset the > machine, > > it comes up ok. If I remove the 2940, it cold boots fine. I synced up > with > > -stable last night and built ok...still stuck with the cold boot issue. I > remember > > a posting here or in -questions about someone having issues with > SCSI_DELAY > > set to 8000...and moving it up to 15000 worked, but can't remember if it > was a > > similar issue. Mine is at 15000 here, but cold boot seems to barf > immediately at > > the 2940. > > > > I've relied on this card for sometime now (EXB-8505), but know it is > possible the > > card is starting to whig out on me. If there are any suggestions on this, > I'd appreciate > > it. My kernel config is 'stock' save for setting the address/irq info on > an ISA NIC, > > and setting cpu to i586_cpu. > > > > TIA, > > co-op > > > > Here is the dmesg from a good warm boot: > > > > Copyright (c) 1992-2000 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD 4.2-STABLE #1: Sat Dec 2 10:45:43 EST 2000 > > root@wrench.rookie.net:/usr/src/sys/compile/NEW > > Timecounter "i8254" frequency 1193182 Hz > > CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU) > > Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 > > Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> > > AMD Features=0x80000800<SYSCALL,3DNow!> > > real memory = 134217728 (131072K bytes) > > config> di sn0 > > config> di lnc0 > > config> di ie0 > > config> di fe0 > > config> di cs0 > > config> di bt0 > > config> di aic0 > > config> di aha0 > > config> di adv0 > > config> en ed0 > > config> po ed0 0x300 > > config> ir ed0 5 > > config> iom ed0 0xd8000 > > config> f ed0 0 > > config> q > > avail memory = 126394368 (123432K bytes) > > Preloaded elf kernel "kernel" at 0xc0435000. > > Preloaded userconfig_script "/boot/kernel.conf" at 0xc043509c. > > K6-family MTRR support enabled (2 registers) > > md0: Malloc disk > > npx0: <math processor> on motherboard > > npx0: INT 16 interface > > pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard > > pci0: <PCI bus> on pcib0 > > pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0 > > pci1: <PCI bus> on pcib1 > > ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem > 0xe7002000-0xe7002fff irq > > 11 at device 2.0 on pci0 > > usb0: OHCI version 1.0, legacy support > > usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 > > usb0: USB revision 1.0 > > uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub0: 2 ports with 2 removable, self powered > > isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0 > > isa0: <ISA bus> on isab0 > > pci0: <unknown card> (vendor=0x1102, dev=0x0002) at 14.0 irq 3 > > pci0: <unknown card> (vendor=0x1102, dev=0x7002) at 14.1 > > atapci0: <AcerLabs Aladdin ATA33 controller> port 0xf000-0xf00f at device > 15.0 o > > n pci0 > > ata0: at 0x1f0 irq 14 on atapci0 > > ata1: at 0x170 irq 15 on atapci0 > > ahc0: <Adaptec 2940 SCSI adapter> port 0xe800-0xe8ff mem > 0xe7000000-0xe7000fff i > > rq 10 at device 18.0 on pci0 > > aic7870: Single Channel A, SCSI Id=7, 16/255 SCBs > > pci0: <ATI Mach64-GP graphics accelerator> at 20.0 > > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > > fdc0: FIFO enabled, 8 bytes threshold > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > > kbd0 at atkbd0 > > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > > psm0: model Generic PS/2 mouse, device ID 0 > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > sc0: <System console> at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x300> > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 16550A > > sio1: configured irq 3 not in bitmap of probed irqs 0 > > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > > plip0: <PLIP network interface> on ppbus0 > > lpt0: <Printer> on ppbus0 > > lpt0: Interrupt-driven port > > ppi0: <Parallel I/O> on ppbus0 > > ed0 at port 0x300-0x31f iomem 0xd8000 irq 5 drq 0 on isa0 > > ed0: address 00:40:05:49:5d:29, type NE2000 (16 bit) > > ad0: 9770MB <Maxtor 91024U2> [19852/16/63] at ata0-master UDMA33 > > ad1: 8063MB <WDC AC28400R> [16383/16/63] at ata0-slave UDMA33 > > ata1-master: Aladdin: two atapi devices on this channel, no DMA > > acd0: CDROM <CD-ROM Drive/G6D> at ata1-master using PIO4 > > ata1-slave: Aladdin: two atapi devices on this channel, no DMA > > acd1: CD-RW <YAMAHA CRW8824E> at ata1-slave using PIO4 > > Waiting 15 seconds for SCSI devices to settle > > sa0 at ahc0 bus 0 target 0 lun 0 > > sa0: <EXABYTE IBM-8505 7Z0A> Removable Sequential Access SCSI-2 device > > sa0: 5.000MB/s transfers (5.000MHz, offset 11) > > Mounting root from ufs:/dev/ad1s1a > > da0 at ahc0 bus 0 target 5 lun 0 > > da0: <IOMEGA ZIP 100 J.03> Removable Direct Access SCSI-2 device > > da0: 3.300MB/s transfers > > da0: Attempt to query device size failed: NOT READY, Medium not present > > > > > > > > Kenneth Wayne Culver wrote: > > > > > I sent this message to -questions earlier, but nobody seems to know > about > > > my problem: > > > > > > I just recently tried putting an adaptec 2940w SCSI controller into my > > > FreeBSD machine (running -STABLE cvsupped and recompiled every night at > > > 1:30AM) and since including the driver in my kernel I've noticed some > > > random panics. Most of the time they occur during heavy disk activity, > and > > > usually only when I'm running X (hence the reason I couldn't tell you > the > > > panic message). Even wierder still, I don't even have any SCSI devices > > > connected yet; I'm using only IDE disks connected via the motherboard's > > > builtin ATA66. I have also searched the various FreeBSD mailinglist > > > archives and found some people with the same problems I was having, but > no > > > solutions. Crashes do not occur in Windows with this configuration (at > > > least not any more than usual :-) ) and when I take the ahc driver out > of > > > the kernel, the panics stop. I've included my dmesg -v output and my > > > kernel config file, please let me know if anything else is needed. > > > > > > Copyright (c) 1992-2000 The FreeBSD Project. > > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > > The Regents of the University of California. All rights > reserved. > > > FreeBSD 4.2-STABLE #0: Fri Dec 1 11:55:01 EST 2000 > > > culverk@culverk.student.umd.edu:/usr/src/sys/compile/MYKERNEL > > > Calibrating clock(s) ... TSC clock: 800028138 Hz, i8254 clock: 1193181 > Hz > > > CLK_USE_I8254_CALIBRATION not specified - using default frequency > > > Timecounter "i8254" frequency 1193182 Hz > > > CLK_USE_TSC_CALIBRATION not specified - using old calibration method > > > CPU: AMD Athlon(tm) Processor (800.03-MHz 686-class CPU) > > > Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 > > > > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, > PAT,PSE36,MMX,FXSR> > > > AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> > > > Data TLB: 24 entries, fully associative > > > Instruction TLB: 16 entries, fully associative > > > L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > > > L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way > associative > > > L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way > associative > > > real memory = 134152192 (131008K bytes) > > > Physical memory chunk(s): > > > 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) > > > 0x0035d000 - 0x07fe7fff, 130592768 bytes (31883 pages) > > > avail memory = 127324160 (124340K bytes) > > > bios32: Found BIOS32 Service Directory header at 0xc00faf90 > > > bios32: Entry = 0xfb400 (c00fb400) Rev = 0 Len = 1 > > > pcibios: PCI BIOS entry at 0xb430 > > > pnpbios: Found PnP BIOS data at 0xc00fbf00 > > > pnpbios: Entry = f0000:bf30 Rev = 1.0 > > > Other BIOS signatures found: > > > ACPI: 000f7ad0 > > > Preloaded elf kernel "kernel" at 0xc0337000. > > > Preloaded elf module "if_xl.ko" at 0xc03370a8. > > > Preloaded elf module "miibus.ko" at 0xc0337148. > > > Preloaded elf module "usb.ko" at 0xc03371e8. > > > Preloaded elf module "ums.ko" at 0xc0337284. > > > Preloaded elf module "bktr_mem.ko" at 0xc0337320. > > > Preloaded elf module "bktr.ko" at 0xc03373c0. > > > Preloaded elf module "agp.ko" at 0xc033745c. > > > bktr_mem: memory holder loaded > > > Pentium Pro MTRR support enabled > > > pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840 > > > pci_open(1a): mode1res=0x80000000 (0x80000000) > > > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106) > > > pcib-: pcib0 exists, using next available unit number > > > apm0: <APM BIOS> on motherboard > > > apm: found APM BIOS v1.2, connected at v1.2 > > > npx0: <math processor> on motherboard > > > npx0: INT 16 interface > > > pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 > > > pci_open(1a): mode1res=0x80000000 (0x80000000) > > > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106) > > > pcib0: <Host to PCI bridge> on motherboard > > > found-> vendor=0x1106, dev=0x0305, revid=0x02 > > > class=06-00-00, hdrtype=0x00, mfdev=0 > > > subordinatebus=0 secondarybus=0 > > > map[10]: type 1, range 32, base d8000000, size 26 > > > found-> vendor=0x1106, dev=0x8305, revid=0x00 > > > class=06-04-00, hdrtype=0x01, mfdev=0 > > > subordinatebus=1 secondarybus=1 > > > found-> vendor=0x1106, dev=0x0686, revid=0x22 > > > class=06-01-00, hdrtype=0x00, mfdev=1 > > > subordinatebus=0 secondarybus=0 > > > found-> vendor=0x1106, dev=0x0571, revid=0x10 > > > class=01-01-8a, hdrtype=0x00, mfdev=0 > > > subordinatebus=0 secondarybus=0 > > > map[20]: type 1, range 32, base 0000d000, size 4 > > > found-> vendor=0x1106, dev=0x3038, revid=0x10 > > > class=0c-03-00, hdrtype=0x00, mfdev=0 > > > subordinatebus=0 secondarybus=0 > > > intpin=d, irq=10 > > > map[20]: type 1, range 32, base 0000d400, size 5 > > > found-> vendor=0x1106, dev=0x3038, revid=0x10 > > > class=0c-03-00, hdrtype=0x00, mfdev=0 > > > subordinatebus=0 secondarybus=0 > > > intpin=d, irq=10 > > > map[20]: type 1, range 32, base 0000d800, size 5 > > > found-> vendor=0x1106, dev=0x3057, revid=0x30 > > > class=06-00-00, hdrtype=0x00, mfdev=0 > > > subordinatebus=0 secondarybus=0 > > > found-> vendor=0x109e, dev=0x036e, revid=0x02 > > > class=04-00-00, hdrtype=0x00, mfdev=1 > > > subordinatebus=0 secondarybus=0 > > > intpin=a, irq=10 > > > map[10]: type 1, range 32, base df002000, size 12 > > > found-> vendor=0x109e, dev=0x0878, revid=0x02 > > > class=04-80-00, hdrtype=0x00, mfdev=1 > > > subordinatebus=0 secondarybus=0 > > > intpin=a, irq=10 > > > map[10]: type 1, range 32, base df000000, size 12 > > > found-> vendor=0x9004, dev=0x7178, revid=0x03 > > > class=01-00-00, hdrtype=0x00, mfdev=0 > > > subordinatebus=0 secondarybus=0 > > > intpin=a, irq=11 > > > map[10]: type 1, range 32, base 0000dc00, size 8 > > > map[14]: type 1, range 32, base df001000, size 12 > > > found-> vendor=0x10b7, dev=0x9200, revid=0x78 > > > class=02-00-00, hdrtype=0x00, mfdev=0 > > > subordinatebus=0 secondarybus=0 > > > intpin=a, irq=10 > > > map[10]: type 1, range 32, base 0000e000, size 7 > > > map[14]: type 1, range 32, base df003000, size 7 > > > found-> vendor=0x1011, dev=0x0009, revid=0x22 > > > class=02-00-00, hdrtype=0x00, mfdev=0 > > > subordinatebus=0 secondarybus=0 > > > intpin=a, irq=12 > > > map[10]: type 1, range 32, base 0000e400, size 7 > > > map[14]: type 1, range 32, base df004000, size 7 > > > found-> vendor=0x1274, dev=0x5880, revid=0x02 > > > class=04-01-00, hdrtype=0x00, mfdev=0 > > > subordinatebus=0 secondarybus=0 > > > intpin=a, irq=12 > > > map[10]: type 1, range 32, base 0000e800, size 6 > > > pci0: <PCI bus> on pcib0 > > > agp0: <VIA VT8363 (KT133) host to PCI bridge> mem 0xd8000000-0xdbffffff > at device 0.0 on pci0 > > > agp0: allocating GATT for aperture of size 256M > > > pcib2: <VIA VT8363 (KT133) PCI-PCI (AGP) bridge> at device 1.0 on pci0 > > > found-> vendor=0x10de, dev=0x0110, revid=0xa1 > > > class=03-00-00, hdrtype=0x00, mfdev=0 > > > subordinatebus=0 secondarybus=0 > > > intpin=a, irq=5 > > > map[10]: type 1, range 32, base dc000000, size 24 > > > map[14]: type 1, range 32, base d0000000, size 27 > > > pci1: <PCI bus> on pcib2 > > > pci1: <NVidia model 0110 graphics accelerator> (vendor=0x10de, > dev=0x0110) at 0.0 irq 5 > > > isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 > > > isa0: <ISA bus> on isab0 > > > atapci0: <VIA 82C686 ATA66 controller> port 0xd000-0xd00f at device 7.1 > on pci0 > > > ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd000 > > > ata0: mask=03 status0=50 status1=00 > > > ata0: mask=03 ostat0=50 ostat2=00 > > > ata0-master: ATAPI probe a=00 b=00 > > > ata0-slave: ATAPI probe a=14 b=eb > > > ata0: mask=03 status0=50 status1=00 > > > ata0-master: ATA probe a=01 b=a5 > > > ata0: devices=09 > > > ata0: at 0x1f0 irq 14 on atapci0 > > > ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd008 > > > ata1: mask=03 status0=50 status1=50 > > > ata1: mask=03 ostat0=50 ostat2=50 > > > ata1-master: ATAPI probe a=00 b=00 > > > ata1-slave: ATAPI probe a=00 b=00 > > > ata1: mask=03 status0=50 status1=50 > > > ata1-master: ATA probe a=01 b=a5 > > > ata1-slave: ATA probe a=01 b=a5 > > > ata1: devices=03 > > > ata1: at 0x170 irq 15 on atapci0 > > > uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device > 7.2 on pci0 > > > usb0: <VIA 83C572 USB controller> on uhci0 > > > usb0: USB revision 1.0 > > > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > > uhub0: 2 ports with 2 removable, self powered > > > ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1 > > > ums0: 4 buttons and Z dir. > > > uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device > 7.3 on pci0 > > > using shared irq10. > > > usb1: <VIA 83C572 USB controller> on uhci1 > > > usb1: USB revision 1.0 > > > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > > uhub1: 2 ports with 2 removable, self powered > > > bktr0: <BrookTree 878> mem 0xdf002000-0xdf002fff irq 10 at device 8.0 on > pci0 > > > brooktree0: PCI bus latency is 32. > > > bktr0: buffer size 3555328, addr 0x5000000 > > > bktr0: GPIO is 0x00fffffb > > > bktr0: subsystem 0x0070 0x13eb > > > bktr0: Hauppauge Model 61291 D110 > > > bktr0: Hauppauge WinCast/TV, Philips NTSC tuner, remote control. > > > pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 8.1 irq 10 > > > ahc0: <Adaptec 2940 SCSI adapter> port 0xdc00-0xdcff mem > 0xdf001000-0xdf001fff irq 11 at device 9.0 on pci0 > > > ahc0: Reading SEEPROM...done. > > > ahc0: Low byte termination Enabled > > > ahc0: High byte termination Enabled > > > ahc0: Downloading Sequencer Program... 429 instructions downloaded > > > aic7870: Wide Channel A, SCSI Id=7, 16/255 SCBs > > > xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe000-0xe07f mem > 0xdf003000-0xdf00307f irq 10 at device 11.0 on pci0 > > > xl0: Ethernet address: 00:01:02:3e:18:41 > > > xl0: media options word: a > > > xl0: found MII/AUTO > > > miibus0: <MII bus> on xl0 > > > xlphy0: <3c905C 10/100 internal PHY> on miibus0 > > > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > > bpf: xl0 attached > > > de0: <Digital 21140A Fast Ethernet> port 0xe400-0xe47f mem > 0xdf004000-0xdf00407f irq 12 at device 13.0 on pci0 > > > de0: 21140A [10-100Mb/s] pass 2.2 > > > de0: address 00:c0:f0:1f:21:02 > > > bpf: de0 attached > > > pcm0: <AudioPCI ES1371> port 0xe800-0xe83f irq 12 at device 15.0 on pci0 > > > pcm0: ac97 codec id 0x83847609 (SigmaTel STAC9721) > > > pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, > SigmaTel 3D Enhancement > > > pcm0: ac97 primary codec extended features AMAP > > > using shared irq12. > > > pcm: setmap 7ded000, 1000; 0xc0bd9000 -> 7ded000 > > > pcm: setmap 7e12000, 1000; 0xc0bde000 -> 7e12000 > > > pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 > > > pci_open(1a): mode1res=0x80000000 (0x80000000) > > > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106) > > > pci-: pci1 exists, using next available unit number > > > pcib1: <Host to PCI bridge> on motherboard > > > pci2: <PCI bus> on pcib1 > > > Trying Read_Port at 203 > > > Trying Read_Port at 243 > > > Trying Read_Port at 283 > > > Trying Read_Port at 2c3 > > > Trying Read_Port at 303 > > > Trying Read_Port at 343 > > > Trying Read_Port at 383 > > > Trying Read_Port at 3c3 > > > isa_probe_children: disabling PnP devices > > > isa_probe_children: probing non-PnP devices > > > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > isa0 > > > fdc0: FIFO enabled, 8 bytes threshold > > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > > > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > > > atkbd: the current kbd controller command byte 0067 > > > atkbd: keyboard ID 0x41ab (2) > > > kbdc: RESET_KBD return code:00fa > > > kbdc: RESET_KBD status:00aa > > > kbd0 at atkbd0 > > > kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 > > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > > > fb0: vga0, vga, type:VGA (5), flags:0x7007f > > > fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 > > > fb0: init mode:24, bios mode:3, current mode:24 > > > fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k > > > VGA parameters upon power-up > > > 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 > > > bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 > > > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > > > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > > > VGA parameters in BIOS for mode 24 > > > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 > > > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > > > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > > > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > > > EGA/VGA parameters to be used for mode 24 > > > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 > > > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > > > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > > > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > > > sc0: <System console> at flags 0x100 on isa0 > > > sc0: VGA <16 virtual consoles, flags=0x300> > > > sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) > > > ppc0: parallel port found at 0x378 > > > ppc0: using extended I/O port range > > > ppc0: EPP SPP > > > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > > > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > > > lpt0: <Printer> on ppbus0 > > > lpt0: Interrupt-driven port > > > isa_probe_children: probing PnP devices > > > BIOS Geometries: > > > 0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors > > > 1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors > > > 2:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors > > > 0 accounted for > > > Device configuration finished. > > > bpf: lo0 attached > > > IP packet filtering initialized, divert enabled, rule-based forwarding > disabled, default to deny, logging disabled > > > ata0-master: success setting UDMA2 on VIA chip > > > Creating DISK ad0 > > > Creating DISK wd0 > > > ad0: <Maxtor 90845D4/GAS54112> ATA-4 disk at ata0-master > > > ad0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S > > > ad0: 16 secs/int, 1 depth queue, UDMA33 > > > ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 > > > ad0: 8063MB <Maxtor 90845D4> [16383/16/63] at ata0-master UDMA33 > > > ata1-master: success setting UDMA4 on VIA chip > > > Creating DISK ad1 > > > Creating DISK wd1 > > > ad1: <Maxtor 91366U4/RA530JN0> ATA-5 disk at ata1-master > > > ad1: 13029MB (26684784 sectors), 26473 cyls, 16 heads, 63 S/T, 512 B/S > > > ad1: 16 secs/int, 1 depth queue, UDMA66 > > > ad1: piomode=4 dmamode=2 udmamode=4 cblid=1 > > > ad1: 13029MB <Maxtor 91366U4> [26473/16/63] at ata1-master UDMA66 > > > ata1-slave: success setting UDMA4 on VIA chip > > > Creating DISK ad2 > > > Creating DISK wd2 > > > ad2: <Maxtor 51536H3/DAC10SC0> ATA-6 disk at ata1-slave > > > ad2: 14655MB (30015216 sectors), 29777 cyls, 16 heads, 63 S/T, 512 B/S > > > ad2: 16 secs/int, 1 depth queue, UDMA66 > > > ad2: piomode=4 dmamode=2 udmamode=5 cblid=1 > > > ad2: 14655MB <Maxtor 51536H3> [29777/16/63] at ata1-slave UDMA66 > > > ata0-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1 > > > ata0-slave: success setting UDMA2 on VIA chip > > > acd0: <TOSHIBA DVD-ROM SD-M1212/1R22> DVD-ROM drive at ata0 as slave > > > acd0: read 5512KB/s (5512KB/s), 256KB buffer, UDMA33 > > > acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R > > > acd0: Audio: play, 16 volume levels > > > acd0: Mechanism: ejectable tray > > > acd0: Medium: no/blank disc inside, unlocked > > > Waiting 10 seconds for SCSI devices to settle > > > (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. > > > de0: enabling 10baseT port > > > Mounting root from ufs:/dev/ad1s1a > > > ad1s1: type 0xa5, start 63, end = 26683964, size 26683902 : OK > > > start_init: trying /sbin/init > > > ad2s1: type 0xa5, start 63, end = 30015215, size 30015153 : OK > > > Linux-ELF exec handler installed > > > splash: image decoder found: blank_saver > > > > > > Here is my custom kernel config file. > > > > > > machine i386 > > > cpu I686_CPU > > > ident "MYKERNEL" > > > maxusers 64 > > > > > > options INET #InterNETworking > > > options FFS #Berkeley Fast Filesystem > > > options FFS_ROOT #FFS usable as root device [keep > this!] > > > options SOFTUPDATES #Enable FFS soft updates support > > > options PROCFS #Process filesystem > > > options COMPAT_43 #Compatible with BSD 4.3 [KEEP > THIS!] > > > options UCONSOLE #Allow users to grab the console > > > options SYSVSHM #SYSV-style shared memory > > > options SYSVMSG #SYSV-style message queues > > > options SYSVSEM #SYSV-style semaphores > > > options P1003_1B #Posix P1003_1B real-time > extensions > > > options _KPOSIX_PRIORITY_SCHEDULING > > > options ICMP_BANDLIM #Rate limit bad replies > > > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > > > > > > device isa > > > device pci > > > > > > # Floppy drives > > > device fdc0 at isa? port IO_FD1 irq 6 drq 2 > > > device fd0 at fdc0 drive 0 > > > > > > device ata > > > device atadisk # ATA disk drives > > > device atapicd # ATAPI CDROM drives > > > #options ATA_STATIC_ID #Static device numbering > > > options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices > > > > > > device atkbdc0 at isa? port IO_KBD > > > device atkbd0 at atkbdc? irq 1 flags 0x1 > > > > > > device vga0 at isa? > > > > > > # splash screen/screen saver > > > pseudo-device splash > > > > > > # syscons is the default console driver, resembling an SCO console > > > device sc0 at isa? flags 0x100 > > > > > > # Floating point support - do not disable. > > > device npx0 at nexus? port IO_NPX irq 13 > > > > > > # Power management support (see LINT for more options) > > > device apm0 at nexus? # Advanced Power Management > > > > > > # Serial (COM) ports > > > device sio > > > > > > # Parallel port > > > device ppc0 at isa? irq 7 > > > device ppbus # Parallel port bus (required) > > > device lpt # Printer > > > > > > # PCI Ethernet NICs. > > > device de # DEC/Intel DC21x4x (``Tulip'') > > > > > > # Pseudo devices - the number indicates how many units to allocated. > > > pseudo-device loop # Network loopback > > > pseudo-device ether # Ethernet support > > > pseudo-device pty # Pseudo-ttys (telnet etc) > > > > > > # The `bpf' pseudo-device enables the Berkeley Packet Filter. > > > # Be aware of the administrative consequences of enabling this! > > > pseudo-device bpf #Berkeley packet filter > > > > > > options IPFIREWALL > > > options IPDIVERT > > > options SC_DISABLE_REBOOT > > > > > > device pcm > > > device ahc > > > device scbus > > > device da > > > device cd > > > > > > options SCSI_DELAY=10000 > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-current" in the body of the message > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A2A6728.7D6698BA>