Date: Wed, 13 Dec 2000 23:37:34 -0800 (PST) From: opentrax@email.com To: lambert@cswnet.com Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Problems booting 486/66 after 3.1 Message-ID: <200012140737.XAA06091@spammie.svbug.com> In-Reply-To: <20001213224956.7E0EC5D319@mail.cswnet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Have you filed a PR? If not, it is at http://www.freebsd.org/send-pr.html I've been having problems with 486s also. Please file a PR, so one day someone might work on it. On 13 Dec, lambert@cswnet.com wrote: > Hi > > I have a Micronics 486 VLB motherboard (unknown exact model) that doesn't > like FreeBSD beyond 3.x. 3.1-RELEASE works fine on this motherboard but > 4.x versions reboot immediately following the display of the Copyright > notices and FreeBSD version line. > > I have been trying to upgrade this installation since 4.0-RELEASE. I just > haven't had time to determine exactly which release blows up until today. > I believe that getting 3.5.1-RELEASE boot -v output will require several > hours / days to download and install. By that time I will probably not > have time to work on it again. I could do a 3.4 install if you need it. > > What other data do I need to gather? > > I have an ed0 interface at 0x300 but I can't convince 3.1 to use the > kernel.config file to enable it automagically from either / or /boot/. > > boot -v with 3.1-RELEASE: > > Copyright (c) 1992-1999 FreeBSD Inc. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > FreeBSD 3.1-RELEASE #0: Mon Feb 15 11:08:08 GMT 1999 > jkh@usw3.freebsd.org:/usr/src/sys/compile/GENERIC > Calibrating clock(s) ... i8254 clock: 1192914 Hz > CLK_USE_I8254_CALIBRATION not specified - using default frequency > Timecounter "i8254" frequency 1193182 Hz > CPU: i486 DX2 (486-class CPU) > Origin = "GenuineIntel" Id = 0x435 Stepping=5 > Features=0x3<FPU,VME> > real memory = 33554432 (32768K bytes) > Physical memory chunk(s): > 0x00001000 - 0x0009efff, 647168 bytes (158 pages) > 0x0034d000 - 0x01ffdfff, 30085120 bytes (7345 pages) > avail memory = 29503488 (28812K bytes) > Other BIOS signatures found: > ACPI: 00000000 > $PnP: 00000000 > Preloaded elf kernel "kernel" at 0xf0340000. > Math emulator present > pci_open(1): mode 1 addr port (0x0cf8) is 0xffffffff > pci_open(2): mode 2 enable port (0x0cf8) is 0xff > Probing for devices on the ISA bus: > atkbd: the current kbd controller command byte 0045 > atkbd: keyboard ID 0x41ab (2) > kbdc: RESET_KBD return code:00fa > kbdc: RESET_KBD status:00aa > sc0 on isa > sc0: fb0 kbd0 > sc0: VGA color <16 virtual consoles, flags=0x0> > ed0 not found at 0x280 > fe0 not found at 0x300 > atkbdc0 at 0x60-0x6f on motherboard > atkbd0 irq 1 on isa > kbd0: atkbd0, AT 101/102 (2), config:0x10000, flags:0x3d0000 > psm0: current command byte:0045 > kbdc: TEST_AUX_PORT status:0000 > kbdc: RESET_AUX return code:00fe > kbdc: RESET_AUX return code:00fe > kbdc: RESET_AUX return code:00fe > kbdc: DIAGNOSE status:0055 > kbdc: TEST_KBD_PORT status:0000 > psm0: failed to reset the aux device. > psm0 not found > sio0: irq maps: 0x1 0x11 0x1 0x1 > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > sio0: type 16550A > sio1: irq maps: 0x1 0x9 0x1 0x1 > sio1 at 0x2f8-0x2ff irq 3 on isa > sio1: type 16550A > sio2: disabled, not probed. > sio3: disabled, not probed. > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > fdc0: FIFO enabled, 8 bytes threshold > fd0: 1.44MB 3.5in > wdc0 at 0x1f0-0x1f7 irq 14 on isa > wdc0: unit 0 (wd0): <WDC AC23200L> > wd0: 3098MB (6346368 sectors), 6296 cyls, 16 heads, 63 S/T, 512 B/S > wd0: ATA INQUIRE valid = 0007, dmamword = 0407, apio = 0003, udma = 0007 > wdc1 at 0x170-0x177 irq 15 on isa > wdc1: unit 0 (atapi): <CD-ROM CDU76E/1.0h>, removable, accel, dma, iordy > acd0: drive speed 689KB/sec, 256KB cache > acd0: supported read types: CD-DA > acd0: Audio: play, 256 volume levels > acd0: Mechanism: ejectable tray > acd0: Medium: no/blank disc inside, unlocked > wt0 not found at 0x300 > mcd0: timeout getting status > mcd0 not found at 0x300 > matcdc0 not found at 0x230 > scd0 not found at 0x230 > ppc: parallel port found at 0x378 > PC873xx probe at 0x2e got unknown ID 0x0 > ppc0: SMC registers CR1=0xb6 CR4=0x2 ECP SPP > ppc0 at 0x378 irq 7 on isa > ppc0: SMC FDC37C665GT chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/15 bytes threshold > nlpt0: <generic printer> on ppbus 0 > nlpt0: Interrupt-driven port > ppi0: <generic parallel i/o> on ppbus 0 > plip: irq 7 > plip0: <PLIP network interface> on ppbus 0 > ie0: unknown board_id: 8 > ie0 not found at 0x300 > ep0 not found at 0x300 > ex0 not found > le0 not found at 0x300 > lnc0 not found at 0x280 > ze0 not found at 0x300 > zp0 not found at 0x300 > cs0: trying to reset the chip. > cs0 not found at 0x300 > adv0 not found at 0x330 > bt0: Failed Status Reg Test - ff > bt0: Failed Status Reg Test - ff > bt0: Failed Status Reg Test - ff > bt0: Failed Status Reg Test - ff > bt0: Failed Status Reg Test - ff > bt0: Failed Status Reg Test - ff > bt0 not found at 0x134 > aha0: status reg test failed ff > aha0: status reg test failed ff > aha0: status reg test failed ff > aha0: status reg test failed ff > aha0: status reg test failed ff > aha0: status reg test failed ff > aha0 not found at 0x134 > vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa > fb0: vga0, vga, type:VGA (5), flags:0x7007f > fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 > fb0: init mode:24, bios mode:3, current mode:24 > fb0: window:0xf00b8000 size:32k gran:32k, buf:0x0 size:0k > VGA parameters upon power-up > 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > VGA parameters in BIOS for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > EGA/VGA parameters to be used for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > npx0 on motherboard > npx0: INT 16 interface > apm0: disabled, not probed. > imasks: bio c008c040, tty c007009a, net c007009a > BIOS Geometries: > 0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors > 1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors > 2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors > 3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors > 4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors > 5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors > 6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors > 7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors > 0 accounted for > Device configuration finished. > new masks: bio c008c040, tty c007009a, net c007009a > Considering MFS root f/s. > No MFS image available as root f/s. > Considering FFS root f/s. > changing root device to wd0s1a > wd0s1: type 0xa5, start 63, end = 6345863, size 6345801 : OK > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200012140737.XAA06091>