Date: Fri, 25 Mar 2005 12:20:49 +1100 From: Graham Menhennitt <gmenhennitt@optusnet.com.au> To: freebsd-stable@freebsd.org Subject: "ffs_mountroot: can't find rootvp" after cvsup and making worldfmen Message-ID: <42436771.3060006@optusnet.com.au>
next in thread | raw e-mail | index | archive | help
I just cvsupped to the latest RELENG_5 (as of yesterday) and built and
installed the world and a new kernel. When I boot the new kernel, I get
an error "ffs_mountroot: can't find rootvp". At the "mountroot>" prompt,
whatever I type (even '?') causes a crash and reboot. I can still boot
my old kernel without a problem. The dmesg from the old kernel and a
capture of the boot of the new kernel are below. Noticably absent from
the new one is the line "ad0: 76319MB <ST380011A/3.06> [155061/16/63] at
ata0-master UDMA100" which is my only disk drive.
Can somebody please help?
Thanks,
Graham
>>>>>>>>>>>>>>>>> old kernel <<<<<<<<<<<<<<<<<<<<<<
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #18: Fri Jan 21 06:23:06 EST 2005
gfm@xxxx.xxx.xxx:/usr/obj/usr/src/sys/fang
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1700.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 335478784 (319 MB)
avail memory = 322949120 (307 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GBT AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x4000-0x40f7,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem
0xe4000000-0xe40000ff irq 11 at device 9.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:20:ed:1c:da:f9
pci2: <multimedia, audio> at device 10.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port
0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
0xd000-0xd01f irq 5 at device 31.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
0xd800-0xd81f irq 12 at device 31.4 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x778-0x77b,0x378-0x37f irq
7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found
Probing for PnP devices on ppbus0:
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
Timecounter "TSC" frequency 1700030560 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad0: 76319MB <ST380011A/3.06> [155061/16/63] at ata0-master UDMA100
Mounting root from ufs:/dev/ad0s1a
>>>>>>>>>>>>>>>>>>>>> new kernel <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Console:
serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 639kB/326592kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
(xxx@xxxx.xxx, Wed Mar 23 20:16:31 EST 2005)
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading
/boot/defaults/loader.conf
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\/boot/kernel/kernel
text=0x252bec |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|data=0x2bbe8+0x30518
/-\|/-\|/-\|syms=[0x4+0x36040/-\|/-\|/-\|/-+0x4+0x44316\|/-\|/-\|/-\|/-\]
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/Loading
/boot/defaults/loader.conf
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-[H[J[4;46H
, ,[5;46H /( )`[6;46H \ \___ /
|[7;46H /- _ `-/ '[8;46H (/\/ \ \
/\[9;46H / / | ` \[10;46H O O ) /
|[11;46H `-^--'`< '[12;46H (_.) _ )
/[13;46H `.___/` /[14;46H `-----'
/[15;46H<----. __ / __ \[16;46H<----|====O)))==) \)
/====[17;46H<----' `--' `.__,' \[18;46H |
|[19;46H \ / /\[20;46H ______( (_
/ \______/[21;46H ,' ,-----' |[22;46H `--{__________)[3;2H³[4;2H³[5;2H³[6;2H³[7;2H³[8;2H³[9;2H³[10;2H³[11;2H³[12;2H³[13;2H³[14;2H³[15;2H³[16;2H³[17;2H³[18;2H³[19;2H³[20;2H³[21;2H³[3;44H³[4;44H³[5;44H³[6;44H³[7;44H³[8;44H³[9;44H³[10;44H³[11;44H³[12;44H³[13;44H³[14;44H³[15;44H³[16;44H³[17;44H³[18;44H³[19;44H³[20;44H³[21;44H³[2;3HÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[22;3HÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[2;2HÚ[22;2HÀ[2;44H¿[22;44HÙ[6;13HWelcome
to FreeBSD![9;5H1 [9;6H. Boot FreeBSD [default][10;5H2 [10;6H. Boot
FreeBSD with ACPI disabled[11;5H3 [11;6H. Boot FreeBSD in Safe
Mode[12;5H4 [12;6H. Boot FreeBSD in single user mode[13;5H5 [13;6H.
Boot FreeBSD with verbose logging[14;5H6 [14;6H. Escape to loader
prompt[15;5H7 [15;6H. Reboot[20;5HSelect option, [Enter] for
default[21;5Hor [Space] to pause timer [21;32H10 [21;32H10
[21;32H10 [21;32H10 [21;32H9 [21;32H9 [21;32H9 [21;32H9
[21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9
[21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H8
[21;32H8 [21;32H8 [21;32H8 [21;32H8 [21;32H8 [21;32H8 [21;32H8
[21;32H8 [21;32H8 [21;32H8 [21;32H8 [21;32H8 [25;0H\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-ACPI
autoload failed - no such file or directory
\|/-\|/Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-PRERELEASE #19: Fri Mar 25 07:31:35 EST 2005
xxx@xxxx.xxx:/usr/obj/usr/src/sys/fang
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1700.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 335478784 (319 MB)
avail memory = 322957312 (307 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem
0xe4000000-0xe40000ff irq 11 at device 9.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:20:ed:1c:da:f9
pci2: <multimedia, audio> at device 10.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port
0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
0xd000-0xd01f irq 5 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
0xd800-0xd81f irq 12 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found
Probing for PnP devices on ppbus0:
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 1700026032 Hz quality 800
Timecounters tick every 10.000 msec
Mounting root from ufs:/dev/ad0s1a
setrootbyname failed
ffs_mountroot: can't find rootvp
Root mount failed: 6
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42436771.3060006>