Date: Fri, 13 Oct 2000 16:10:02 -0700 (PDT) From: "Jose M. Alcaide" <jose@we.lc.ehu.es> To: freebsd-bugs@FreeBSD.org Subject: Re: misc/21955: FreeBSD 4.1.1 does not recognize the slave disk (ATA) Message-ID: <200010132310.QAA24025@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR misc/21955; it has been noted by GNATS. From: "Jose M. Alcaide" <jose@we.lc.ehu.es> To: lvinyes@teleline.es Cc: freebsd-gnats-submit@FreeBSD.ORG Subject: Re: misc/21955: FreeBSD 4.1.1 does not recognize the slave disk (ATA) Date: Sat, 14 Oct 2000 00:37:54 +0200 lvinyes@teleline.es wrote: > > I have a system with 3 IDE disks and a CDROM. > With 4.1, the system recognizes OK all the disks, but booting from the CDROM of 4.1.1 it only recognizes ad0 and ad2, ad1 is missing. > The 1st. and 2nd. disks (ad0 and ad1) are identical 13 Gb. > In this machine I have Windows 98, FreeBSD 4.1, BeOS, Linux, and NetBSD 1.4.2, working OK and seeing all 3 HD and the CDROM. I also found this problem with a system based on the VIA KT133 chipset: atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 7.1 on pci0 The primary slave (the CD-ROM) was not detected, and despite of the hard disk and the ATA cable being ATA66, the boot messages reported that the channel was working at 33 MHz because of the cable. I moved the CD-ROM to the secondary master, and then everything worked fine; therefore, the cable was not guilty. -- JMA ****** Jose M. Alcaide // jose@we.lc.ehu.es // jmas@FreeBSD.org ****** ** "Beware of Programmers who carry screwdrivers" -- Leonard Brandwein ** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200010132310.QAA24025>