Date: Wed, 25 Oct 2000 11:45:11 -0400 (EDT) From: Antoine Beaupre <beaupran@IRO.UMontreal.CA> To: Siegbert Baude <siegbert.baude@gmx.de> Cc: stable@freebsd.org Subject: Re: Can't record hifi audio on with sox on -stable Message-ID: <Pine.LNX.4.21.0010251143410.12141-100000@blm16.IRO.UMontreal.CA> In-Reply-To: <39F6A576.A65597B6@gmx.de>
index | next in thread | previous in thread | raw e-mail
This is very likely it. If the DMA channel would be wrong I would get something like "dma channel dead"... I just never knew '0' was a valid drq. :) And for the irq 9 setting, no beef. It's setup this way, and about the only way I can set it up in my local irq civil war. ;) A. On Wed, 25 Oct 2000, Siegbert Baude wrote: > Hello Antoine, > > > The sound card is a AWE32: > > sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq > > 9 drq 0,5 on isa0 > > pcm0: <SB DSP 4.16> on sbc0 > > > > It's odd, however, that drq 0 thing... The system is a 4.1.1-stable dated > > on 2000.10.17. > > drq is your DMA channel. 0,5 is AWE´s PnP suggestion for all cases, except the > standard one irq 5 drq 1,5. As your NIC is on irq 5, the PnP configuration will > therefore choose irq 9 drq 0,5 for your AWE. There should be nothing wrong about > it, but you can just try to reconfigure your NIC to irq 9, then your AWE should > get the standard irq 5, drq 1,5 assigned. > BTW, this will be exactly the same in other OSs, so if you can try if it works > under Linux, Win, BeOS or something else, you can exclude hardware errors. > > Ciao > Siegbert > > P.S.: I´m afraid I don´t have any sources here, to check recording for my AWE > :-( > Si l'image donne l'illusion de savoir C'est que l'adage pretend que pour croire, L'important ne serait que de voir Lofofora To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the messagehelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.21.0010251143410.12141-100000>