Date: Mon, 30 Mar 2020 17:12:56 +0000 From: bugzilla-noreply@freebsd.org To: net@FreeBSD.org Subject: [Bug 245152] urndis(4) Inseego/Novatel Wireless MiFi 8800/8000 as urndis0 4g/LTE RNDIS fails to tether Message-ID: <bug-245152-7501-mqwpJpj86R@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-245152-7501@https.bugs.freebsd.org/bugzilla/> References: <bug-245152-7501@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D245152 --- Comment #5 from rootless@gmail.com --- --- Comment #1 from Kubilay Kocak <koobs@FreeBSD.org> --- Can you provide us with information (ideally on FreeBSD) on the relevant Novatel device(s) that do work on FreeBSD, including which versions they work on. Good question. It appears that some older devices do. I don't have any ot= her devices nor working devices. Just from searching on the web I found that an MiFi7730, from here: https://forum.netgate.com/topic/143342/unable-to-properly-keep-usb-ethernet= -interface-attached-on-verizon-jetpack-7730l/2 I also found the following on the OpenBSD listserv: http://openbsd-archive.7691.n7.nabble.com/patch-for-Inseego-Novatel-MiFi-88= 00L-as-urndis0-td361099.html Can you also elaborate on: - "tethering on newer devices", as to whether that means you have an ol= der device that works, or worked in the past? Just based on reports from the web. I only have the MiFi 8800/8000 - the differences are the frequencies for the cell modem tied to the carrier. - "enabling tethering is not get picked up", whaty does this specifical= ly mean with regard to steps to reproduce, commands, outputs, errors,system configuration to do so, etc (please provide as attachments) 1) Plug in the device via USB. 2) It should be picked up as an rndis device and assigned to ue0 (assuming = no other ue devices). [even using usbconfig -d ugen1.2 set_config 1 doesn't result in an RNDIS ethernet interface being created] Additionally, the following may be helpful dmesg at plugin: ugen1.2: <Novatel Wireless MiFi 8000> at usbus1 uhid2 on uhub0 uhid2: <HID Interface> on usbus1 usbconfig with the device attached: # usbconfig ugen1.1: <0x15ad EHCI root HUB> at usbus1, cfg=3D0 md=3DHOST spd=3DHIGH (48= 0Mbps) pwr=3DSAVE (0mA) ugen0.1: <0x15ad UHCI root HUB> at usbus0, cfg=3D0 md=3DHOST spd=3DFULL (12= Mbps) pwr=3DSAVE (0mA) ugen0.2: <VMware VMware Virtual USB Mouse> at usbus0, cfg=3D0 md=3DHOST spd= =3DFULL (12Mbps) pwr=3DON (0mA) ugen0.3: <VMware, Inc. VMware Virtual USB Hub> at usbus0, cfg=3D0 md=3DHOST spd=3DFULL (12Mbps) pwr=3DSAVE (0mA) ugen1.2: <Novatel Wireless MiFi 8000> at usbus1, cfg=3D0 md=3DHOST spd=3DHI= GH (480Mbps) pwr=3DON (224mA) also # usbconfig -d 1.2 dump_device_desc ugen1.2: <Novatel Wireless MiFi 8000> at usbus1, cfg=3D0 md=3DHOST spd=3DHI= GH (480Mbps) pwr=3DON (224mA) bLength =3D 0x0012 bDescriptorType =3D 0x0001 bcdUSB =3D 0x0310 bDeviceClass =3D 0x0000 <Probed by interface class> bDeviceSubClass =3D 0x0000 bDeviceProtocol =3D 0x0000 bMaxPacketSize0 =3D 0x0009 idVendor =3D 0x1410 idProduct =3D 0xb022 bcdDevice =3D 0x0318 iManufacturer =3D 0x0001 <Novatel Wireless> iProduct =3D 0x0002 <MiFi 8000> iSerialNumber =3D 0x0003 <0123456789ABCDEF> bNumConfigurations =3D 0x0001 --=20 You are receiving this mail because: You are on the CC list for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-245152-7501-mqwpJpj86R>