Date: Mon, 13 Sep 2004 22:33:53 +0400 From: Toxa <postfix@sendmail.ru> To: current@freebsd.org Cc: freebsd@deepcore.dk Subject: current ata problems (cannot mount cdrom) Message-ID: <20040913183353.GA14132@laptoxa.toxa.lan>
next in thread | raw e-mail | index | archive | help
--ikeVEW9yuYc//A+q
Content-Type: text/plain; charset=koi8-r
Content-Disposition: inline
ATA seems broken in recent current, my ide disk working with no problems
but if I try to mount cdrom:
[(22:01)(82.96%)(p1):~ ] sudo mount_cd9660 -C KOI8-R /dev/cd0 /mnt/cdrom
(cd0:ata1:0:0:0): READ TOC/PMA/ATIP {MMC Proposed}. CDB: 43 0 0 0 0 0 0
0 4 0
(cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:24,0
(cd0:ata1:0:0:0): Invalid field in CDB: Command byte 0 is invalid
(cd0:ata1:0:0:0): Unretryable error
mount_cd9660: /dev/cd0: Input/output error
dmesg attached
--
Anton A. Karpov
PGP key: http://www.toxahost.org/pgp/pubkey.asc
You can finger me @toxahost.org for my current status
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=
"Anyone who quotes me in their sig is an idiot."
Rusty Russell.
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=
--ikeVEW9yuYc//A+q
Content-Type: text/plain; charset=koi8-r
Content-Disposition: attachment; filename="dmesg.boot"
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Sat Sep 11 17:57:39 MSD 2004
root@laptoxa.toxa.lan:/usr/obj/usr/src/sys/LAPTOXA
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz (1193.11-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 536346624 (511 MB)
avail memory = 515100672 (491 MB)
Pentium 4 TCC support enabled, 6 steps from 100% to 38%, current performance 100%
acpi0: <SONY> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
acpi link get: empty IRQ resource
acpi link get: empty IRQ resource
acpi link get: empty IRQ resource
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <ATI Radeon LY Mobility M6> port 0x3000-0x30ff mem 0xe8100000-0xe810ffff,0xf0000000-0xf7ffffff irq 9 at device 0.0 on pci1
info: [drm] AGP at 0xec000000 64MB
info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
acpi link get: empty IRQ resource
acpi link get: empty IRQ resource
acpi link get: empty IRQ resource
pci2: <ACPI PCI bus> on pcib2
wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff at device 2.0 on pci2
wi0: [GIANT-LOCKED]
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.3)
wi0: Ethernet address: 00:d0:59:49:12:52
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 9 at device 5.0 on pci2
pcic0: [GIANT-LOCKED]
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pci2: <serial bus, FireWire> at device 5.1 (no driver attached)
ohci0: <NEC uPD 9210 USB controller> mem 0xe8200000-0xe8200fff irq 9 at device 7.0 on pci2
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xe8201000-0xe8201fff irq 9 at device 7.1 on pci2
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
umass0: Sony USB Memory Stick Slot, rev 1.10/1.90, addr 2
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xe8203800-0xe82038ff irq 9 at device 7.2 on pci2
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x4000-0x403f mem 0xe8202000-0xe8202fff irq 9 at device 8.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 08:00:46:ac:4c:a8
fxp0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1800-0x180f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH3 (82801CA)> port 0x1840-0x187f,0x1c00-0x1cff irq 9 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Yamaha YMF753 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
speaker0 port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
acpi_snc0: <Sony notebook controller> on acpi0
acpi_snc0: PID 0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1193113832 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 38154MB <HITACHI_DK23EA-40/00K3A0A3> [77520/16/63] at ata0-master UDMA100
umass0: at uhub1 port 2 (addr 2) disconnected
umass0: detached
umass0: Sony USB Memory Stick Slot, rev 1.10/1.90, addr 2
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt
ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt
ATAPI_RESET time = 150us
acd0: CDRW <UJDA745 DVD/CDRW/1.00> at ata1-master UDMA33
(probe2:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe2:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe2:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe2:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe2:umass-sim0:0:0:0): Medium not present
(probe2:umass-sim0:0:0:0): Unretryable error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA UJDA745 DVD/CDRW 1.00> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s3a
--ikeVEW9yuYc//A+q--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040913183353.GA14132>