Date: Wed, 24 Apr 2002 01:12:27 -0400 From: Kent Hauser <kent@tfd.com> To: danny@ricin.com, freebsd-multimedia@freebsd.org Subject: Re: SBLive problems Message-ID: <3CC63EBA.7A3B8241@tfd.com> References: <200204240029.25669.danny@ricin.com>
next in thread | previous in thread | raw e-mail | index | archive | help
No luck. In kernel or module loaded. I moved the card (another suggestion) and still no luck w/ irq 10. Some (relevant) output: %cat /dev/sndstat FreeBSD Audio Driver (newpcm) Apr 23 2002 02:10:03 Installed devices: pcm0: <Creative EMU10K1> at io 0x14e0 irq 10 (4p/1r/0v channels duplex) %mixer Mixer vol is currently set to 100:100 Mixer pcm is currently set to 75:75 Mixer speaker is currently set to 75:75 Mixer line is currently set to 75:75 Mixer mic is currently set to 0:0 Mixer cd is currently set to 75:75 Mixer rec is currently set to 0:0 Mixer line1 is currently set to 75:75 Mixer phin is currently set to 0:0 Mixer phout is currently set to 0:0 Mixer video is currently set to 75:75 Mixer monitor is currently set to 75:75 %mixer pcm 100 Setting the mixer pcm to 100:100. %ls -l /dev/dsp* lrwxrwxrwx 1 root wheel 4 Apr 23 15:09 /dev/dsp -> dsp0 lrwxrwxrwx 1 root wheel 6 Apr 23 15:09 /dev/dsp0 -> dsp0.0 crw-rw-rw- 1 root wheel 30, 3 Apr 24 01:11 /dev/dsp0.0 crw-rw-rw- 1 root wheel 30, 0x00010003 Apr 23 15:09 /dev/dsp0.1 crw-rw-rw- 1 root wheel 30, 0x00020003 Apr 23 15:09 /dev/dsp0.2 crw-rw-rw- 1 root wheel 30, 0x00030003 Apr 23 15:09 /dev/dsp0.3 lrwxrwxrwx 1 root wheel 5 Apr 23 15:09 /dev/dspW -> dspW0 lrwxrwxrwx 1 root wheel 7 Apr 23 15:09 /dev/dspW0 -> dspW0.0 crw-rw-rw- 1 root wheel 30, 5 Apr 23 15:09 /dev/dspW0.0 crw-rw-rw- 1 root wheel 30, 0x00010005 Apr 23 15:09 /dev/dspW0.1 crw-rw-rw- 1 root wheel 30, 0x00020005 Apr 23 15:09 /dev/dspW0.2 crw-rw-rw- 1 root wheel 30, 0x00030005 Apr 23 15:09 /dev/dspW0.3 % Any other thoughts???? Kent "Danny Pansters (by way of Danny Pansters )" wrote: > Forgot to mention.. I *use* a SB Live. Only the stupid front with all > the sockets and stuff does not work at all, BTW. > > But the normal audio in- and output and mic work just fine. > > On Tuesday 23 April 2002 08:32, Kent Hauser wrote: > > Hi all, > > > > From reading the traffic, I understand my SBLive card should work. > > It doesn't -- neither to play CDs nor MP3s (cdcontrol > > play/mp3blaster). It worked long ago (freebsd 3.5 or so) and of > > course is find under W98. > > > > What's my problem? My only guess is that irq 11 is used by the > > NVidia in pci1 and irq 11 is also used by SBLive on pci0. I've no > > clue if this is a problem or, if so, how to overcome it. > > In my experience, IRQs only matter with old ISA cards and maybe with > PnP thingies, but normally with PCI you can share as many IRQs as you > need to. > > > I'm running -STABLE with basically a GENERIC kernel (only mod is to > > shorten SCSI_DELAY & enable IPSEC). EMU10K is enabled via > > loader.conf. > > Uhm, this might not be the answer you like to hear, but try to > compile it in-kernel instead. Put device pcm in your conf. Then > reboot and cd /dev then ./MAKEDEV snd0. This is also in the online > Handbook. > > HTH, greetings, > > ------------------------------- > Danny Pansters > danny@ricin.com > http://www.ricin.com > ------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3CC63EBA.7A3B8241>