Date: Fri, 07 May 1999 22:15:07 -0700 From: Eric Hodel <hodeleri@seattleu.edu> To: "freebsd-current@FreeBSD.ORG" <freebsd-current@FreeBSD.ORG> Subject: tosha after CAM changes Message-ID: <3733C85B.5ACA8F4A@seattleu.edu>
next in thread | raw e-mail | index | archive | help
I'm having trouble using tosha after the CAM changes, I updated source
early this morning (around 7:00 PDT 5/7/1999) including ports, then
make deinstall make distclean in /usr/ports/audio/tosha then make &&
make install and tosha, and now tosha gives me (as root):
#tosha -t1
tosha: cam_lookup_pas: CAMGETPASSTHRU ioctl failed
cam_lookup_pass: Inappropriate ioctl for device
This is using a Teac CD-532S CD-ROM (SCSI2) attached to an onboard
AIC-7890 on an ASUS P2B-LS
cdrecord's eject, info, pause, play, resume, set, status, stop, and
volume work
cdrecord's close never worked, and now debug on and reset do not work
(don't know if they worked or not before.)
kernel config:
ident SEVENTH
machine i386
cpu I686_CPU
maxusers 32
options INET
options FFS
options FFS_ROOT
options MFS
options MFS_ROOT
options NFS
options NFS_ROOT
options MSDOSFS
options CD9660
options CD9660_ROOT
options PROCFS
options COMPAT_43
options SCSI_DELAY=2000
options UCONSOLE
options FAILSAFE
options USERCONFIG
options VISUAL_USERCONFIG
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options _KPOSIX_VERSION=199303L
options KBD_INSTALL_CDEV
config kernel root on wd0
controller isa0
controller pnp0
controller pci0
controller fdc0 at isa? port IO_FD1 irq 6 drq 2
disk fd0 at fdc0 drive 0
#controller ata0
#device atadisk0
controller wdc0 at isa? port IO_WD1 irq 14
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
#controller wdc1 at isa? port IO_WD2 irq 15
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
controller ahc0
controller scbus0
device da0
device cd0
device pass0
controller atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa? port ? conflicts
pseudo-device splash
device sc0 at isa?
device npx0 at nexus? port IO_NPX irq 13
device apm0 at nexus? disable flags 0x31 # Advanced Power
Management
#device sio0 at isa? port IO_COM1 flags 0x10 irq 4
#device sio1 at isa? disable port IO_COM2 irq 3
device ppc0 at isa? port? irq 7
controller ppbus0
device lpt0 at ppbus?
device fxp0
device ed0 at isa? disable port 0x2c0 irq 10
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
pseudo-device snp 3
options SYSVSHM
options SYSVMSG
options SYSVSEM
pseudo-device bpfilter 4 #Berkeley packet filter
controller uhci0
controller usb0
device umass0
device ums0
device ukbd0
device ulpt0
device uhid0
device ugen0
device pcm0
dmesg:
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 4.0-CURRENT #5: Thu May 6 21:57:56 PDT 1999
root@erich2.unix.seattleu.edu:/usr/local/src/sys/compile/SEVENTH
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (350.80-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping=1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 67043328 (65472K bytes)
avail memory = 62484480 (61020K bytes)
Pentium Pro MTRR support enabled, default memory type is uncacheable
Probing for PnP devices:
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <PCI host bus adapter> on motherboard
pci0: <PCI bus> on pcib0
chip0: <Intel 82443BX host to PCI bridge> at device 0.0 on pci0
chip1: <Intel 82443BX host to AGP bridge> at device 1.0 on pci0
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> at device 4.1 on
pci0
uhci0: <Intel 82371AB/EB (PIIX4) USB Host Controller> at device 4.2 on
pci0
uhci0: interrupting at irq 10
usb0: <Intel 82371AB/EB (PIIX4) USB Host Controller> on uhci0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ukbd0
ukbd0: Microsoft product 0x000b, rev 1.00/1.04, addr 2, iclass 3/1
kbd1 at ukbd0
chip2: <Intel 82371AB Power management controller> at device 4.3 on
pci0
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> at device 6.0 on pci0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: interrupting at irq 10
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> at device 7.0 on pci0
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:e0:18:90:2d:3e
es0: <AudioPCI ES1370> at device 10.0 on pci0
pcm0: using I/O space register mapping at 0xa400
es0: interrupting at irq 11
isa0: <ISA bus> on motherboard
fdc0: interrupting at irq 6
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> at fdc0 drive 0
wdc0 at port 0x1f0-0x1f7 irq 14 on isa0
wdc0: unit 0 (wd0): <Conner Peripherals 850MB - CFS850A>
wd0: 812MB (1664208 sectors), 1651 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <QUANTUM BIGFOOT_CY2160A>
wd1: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: interrupting at irq 14
atkbdc0: <keyboard controller (i8042)> at port 0x60 on isa0
atkbd0: <AT Keyboard> on atkbdc0
kbd0 at atkbd0
atkbd0: interrupting at irq 1
psm0: <PS/2 Mouse> on atkbdc0
psm0: model MouseMan+, device ID 0
psm0: interrupting at irq 12
vga0: <Generic ISA VGA> on isa0
sc0: <System console> on isa0
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: interrupting at irq 4
sio1: not probed (disabled)
ppc0 at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppc0: interrupting at irq 7
ed0: not probed (disabled)
Waiting 2 seconds for SCSI devices to settle
changing root device to wd0s1a
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: cd present [166445 x 2048 byte records]
da1 at ahc0 bus 0 target 1 lun 0
da1: <COMPAQPC CP30540 90C5> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 16)
da1: 511MB (1046532 512 byte sectors: 64H 32S/T 511C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM VIKING II 4.5WLS 4110> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged
Queueing Enabled
da0: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C)
--
Eric Hodel
hodeleri@seattleu.edu
"If you understand what you're doing, you're not learning anything."
-- A. L.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3733C85B.5ACA8F4A>