Date: Fri, 23 Jan 2004 17:06:14 -0700 From: Tom Ponsford <tponsford@theriver.com> To: freebsd-alpha@freebsd.org Cc: freebsd-current@FreeBSD.ORG Subject: Same problem, new year 2100A machine check Message-ID: <4011B6F6.5040306@theriver.com>
next in thread | raw e-mail | index | archive | help
Hi All,
I decided to replace a disk on the ol' 2100A. I had been running VMS on it
without any troubles, until a disk started giving me errors. After replacing
the disk, I decided to give 5.2 a go, thinking maybe some of the problems of
last year may have been resolved.
No such luck.
As you can see below, it's doing the machine check at almost the same point as
last year. In combing the archives, it seems that there were problems with
some cards, so I yanked out all the pci cards (there were no EISA cards),
still a machine check.
This machine booted and ran stable under 4-xx with a uniprocessor kernel
It seems you may have to disable the machine checks in order to get this beast
to boot, any pointers on where to start?
I'd like to play with it with FBSD before going back to VMS.
Below is the console firmware pre-boot diag and then the actual boot -v output
and then the show config and show fru.
Cheers
Tom
####################################################
VMS PALcode V5.56-7, OSF PALcode V1.45-12
starting console on CPU 0
initialized idle PCB
initializing semaphores
initializing heap
initial heap 1c0c0
memory low limit = 13c000
heap = 1c0c0, 13fc0
initializing driver structures
initializing idle process PID
XDELTA not enabled
initializing file system
initializing timer data structures
lowering IPL
CPU 0 speed is 3.64 ns (275MHz)
create dead_eater
create poll
create timer
create powerup
access NVRAM
entering idle loop
Starting Memory Diagnostics
Testing CSIC on Memory Module 0
Testing CSIC on Memory Module 3
Testing 1st 8MB(s) on memory module 0
Testing all memory banks in parallel
Testing Memory bank 0
Testing Memory bank 1
Testing Memory bank 2
Testing Memory bank 3
Configuring Memory Modules
Configured memory size = 28000000
Memory Diagnostics completed
probing hose 0, PCI
probing PCI-to-EISA bridge, bus 1
probing PCI-to-PCI bridge, bus 2
bus 2, slot 1 -- pka -- NCR 53C810
starting console on CPU 1
initialized idle PCB
initializing idle process PID
lowering IPL
CPU 1 speed is 3.64 ns (275MHz)
create powerup
antering idle loopst
rting console on CPU 2
initialized idle PCB
initializing idle process PID
lowering IPL
starting console on CPU 3
initialized idle PCB
initializing idle process PID
lowering IPL
CPU 2 speed is 3.64 ns (275MHz)
create powerup
CPU 3 speed is 3.64 ns (275MHz)
create powerup
os_type: UNIX - console CIPCA driver not started
Memory Testing and Configuration Status
Module Size Base Addr Intlv Mode Intlv Unit Status
------ ----- --------- ---------- ---------- ------
0 128MB 20000000 1-Way 0 Passed
3 512MB 00000000 1-Way 0 Passed
Total Bad Pages 0
Testing the System
Testing the Disks (read only)
AlphaServer 2100A Console V5.3-10, built on Oct 16 1998 at 14:06:58
################################################################
P00>>>boot dka500
(boot dka500.5.0.2001.0)
block 0 of dka500.5.0.2001.0 is a valid boot block
reading 393 blocks from dka500.5.0.2001.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 31200
initializing HWRPB at 2000
initializing page table at 27ff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x4000700010538
OSF PAL rev: 0x4000c0002012d
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root@mithlond.btc.adaptec.com, Sat Jan 10 12:52:28 GMT 2004)
Memory: 655360 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x508f30+0x418f0 syms=[0x8+0x671d0+0x8+0x5115f]
|
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -v
Entering /boot/kernel/kernel at 0xfffffc0000342f20...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #0: Sun Jan 11 01:06:36 GMT 2004
root@mithlond.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000d3e000.
Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000d3e0e0.
DEC AlphaServer 2100A
AlphaServer 2100A 4/275, 274MHz
8192 byte page size, 4 processors.
CPU: EV45 (21064A) major=6 minor=2
OSF PAL rev: 0x4000c0002012d
real memory = 668917760 (637 MB)
Physical memory chunk(s):
0x00d60000 - 0x2767bfff, 647086080 bytes (78990 pages)
avail memory = 637779968 (608 MB)
smp_start_secondary: starting cpu 1
smp_start_secondary: cpu 1 started
smp_start_secondary: starting cpu 2
smp_start_secondary: cpu 2 started
smp_start_secondary: starting cpu 3
smp_start_secondary: cpu 3 started
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
t20: using interrupt type 1 on pci bus 0
t20: <T2 Core Logic chipset>
pcib0: <T2 PCI host bus adapter> on t20
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x0482, revid=0x15
bus=0, slot=2, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1011, dev=0x0001, revid=0x02
bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0a80, cachelnsz=8 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x27 (9750 ns), maxlat=0x00 (0 ns)
eisab0: <PCI-EISA bridge> at device 2.0 on pci0
unexpected machine check:
mces = 0x1
vector = 0x670
param = 0xfffffc0000006000
pc = 0xfffffc00003b48d4
ra = 0xfffffc00003b4908
curproc = 0xfffffc0000810ee0
pid = 0, comm = swapper
panic: machine check
cpuid = 0;
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
######################################################
P00>>>show fru
Rev Events logged
Slot Option Part# Hw Sw Serial# SDD TDD
0 IO 24283-01 C2 0 KA713VPLRL 00 00
1 CPU2 B2024-AA D4 9 KA525BATCW 00 00
2 CPU0 B2024-AA D4 9 KA510UEZ56 00 00
3 CPU1 B2024-AA D4 11 AY63613177 00 00
5 CPU3 B2024-AA D4 9 KA537DKVWJ 00 00
4 MEM0 B2022-DA B1 0 AY72239742 00 00
7 MEM3 B2022-FA B1 0 AY52311544 00 00
Slot Option Hose 0, Bus 2, PCI on Primary I/O
Slot Option Hose 0, Bus 0, PCI on Primary I/O
Slot Option Hose 0, Bus 1, EISA on Primary I/O
######################################################
P00>>>show config
Digital Equipment Corporation
AlphaServer 2100A 4/275
SRM Console V5.3-10 VMS PALcode V5.56-7, OSF PALcode V1.45-12
Component Status Module ID
CPU 0 P B2024-AA DECchip (tm) 21064A-2
CPU 1 P B2024-AA DECchip (tm) 21064A-2
CPU 2 P B2024-AA DECchip (tm) 21064A-2
CPU 3 P B2024-AA DECchip (tm) 21064A-2
Memory 0 P B2022-DA 128 MB
Memory 3 P B2022-FA 512 MB
I/O 24283-01
dva0.0.0.1000.0 RX26/RX23
Slot Option Hose 0, Bus 0, PCI
2 Intel 82375 Bridge to Bus 1, EISA
3 DECchip 21050-AA Bridge to Bus 2, PCI
Slot Option Hose 0, Bus 1, EISA
Slot Option Hose 0, Bus 2, PCI
1 NCR 53C810 pka0.7.0.2001.0 SCSI Bus ID 7
dka0.0.0.2001.0 RZ28D
dka300.3.0.2001.0 SEAGATE ST15230W SUN4.2G
dka500.5.0.2001.0 RRD45
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4011B6F6.5040306>