Date: Mon, 9 Oct 2000 18:46:13 -0200 From: Fabio Amorim <fabio_amorim@ig.com.br> To: andreas@klemm.gtn.com Cc: freebsd-mobile@freebsd.org Subject: Re: Xircom RealPort Ethernet 10/100+Modem 56 (16 Bit card) (was:...) Message-ID: <20001009204619.EDE7137B503@hub.freebsd.org>
next in thread | raw e-mail | index | archive | help
Hi!
My Xircom is work!! I have a HP Omminibook 4150 and after many try.. hehe..
It's worked!
I clean the pccard.conf file and leave only Xircom configuration section.
When the FreeBSD 4.1 is initialized, It's found de Xircom card but It's
don't make up this pccard, so I logon into notebook and use ifconfig command
line to up this pccard("ifconfig xe0 up"). I received some error message
taking about time out to reset this device, but it's work.
When I use dhclient to get a ip in same times I receive much error messages,
but it's work yet.. hehe...
If you didn't try.. You need to try ifconfig xe0 up.
Best Regards
Fabio Amorim
Hewlett Packard Consultant
South Latin America Community
Em 09 Oct 2000, Andreas Klemm escreveu:
>On Mon, Sep 25, 2000 at 08:27:06PM -0500, Ade Lovett wrote:
>> On a related note, do you have need for a RealPort REM56G-100
>> ethernet/modem combo card?
>
>Hi !
>
>I also have some problems to get
>Xircom RealPort Ethernet 10/100+Modem 56 (16 Bit card)
>to run on FreeBSD 4.1.1-STABLE on a Toshiba Satellite Pro 4360.
>
>It is recognized, but doesn't work here ...
>Many debugging output, PHY o.k., but nothing comes through ...
>
>Tried several IRQs 3,9,10
>Tried to free IRQ 10, by compiling kernel, that uses
>IRQ 11 for pcic0:
>device card
>#device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000
>device pcic0 at isa? irq 11 port 0x3e0 iomem 0xd0000
>#device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable
>
>Here the comconsole logs of the 3 boot trials ...
>Kernel has debug level 2 compiled in for xe driver.
>
>pccardc dumpcis output and pccard.conf entry at the end of the
>file by cat'ting it to /dev/console (so I got the output via
>comconsole ;-)
>
>Maybe one kind soul can help
>
>Thanks !
>
> Andreas ///
>
>ok boot
>|/-\|/-Copyright (c) 1992-2000 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
>FreeBSD 4.1-20001003-STABLE #1: Mon Oct 9 07:58:58 CEST 2000
> root@titan.klemm.gtn.com:/usr/src/sys/compile/LAPTOP
>Timecounter "i8254" frequency 1193182 Hz
>CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x683 Stepping = 3
>
>Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
>real memory = 201195520 (196480K bytes)
>avail memory = 192323584 (187816K bytes)
>Preloaded elf kernel "kernel" at 0xc034e000.
>VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02f0da2 (1000022)
>VESA: S3 Incorporated. M7 BIOS
>Pentium Pro MTRR support enabled
>md0: Malloc disk
>apm0: <APM BIOS> on motherboard
>apm: found APM BIOS v1.2, connected at v1.2
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
>pci0: <PCI bus> on pcib0
>pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
>pci1: <PCI bus> on pcib1
>pci1: <S3 model 8c12 graphics accelerator> at 0.0 irq 11
>isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on
>pci0
>ata0: at 0x1f0 irq 14 on atapci0
>ata1: at 0x170 irq 15 on atapci0
>pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11
>chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at
>device 5.3 on pci0
>pci0: <unknown card> (vendor=0x11c1, dev=0x0441) at 7.0 irq 3
>pci0: <unknown card> (vendor=0x1179, dev=0x0d01) at 9.0 irq 11
>pcm0: <Yamaha DS-1E (YMF744)> port 0xfefc-0xfeff,0xff00-0xff3f mem
>0xefff8000-0xefffffff irq 11 at device 12.0 on pci0
>fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>kbd0 at atkbd0
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model IntelliMouse, device ID 3
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x100>
>pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
>pcic0: management irq 10
>pccard0: <PC Card bus -- kludge version> on pcic0
>pccard1: <PC Card bus -- kludge version> on pcic0
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 16550A, console
>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
>ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/8 bytes threshold
>ppi0: <Parallel I/O> on ppbus0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>plip0: <PLIP network interface> on ppbus0
>ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master using UDMA33
>acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using UDMA33
>Mounting root from ufs:/dev/ad0s3a
>pccard: card inserted, slot 0
>swapon: adding /dev/ad0s3b as swap device
>Automatic boot in progress...
>/dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3a: clean, 31350 free (174 frags, 3897 blocks, 0.3% fragmentation)
>/dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3f: clean, 2377352 free (68312 frags, 288630 blocks, 2.4%
>fragmentation)
>/dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3e: clean, 253630 free (110 frags, 31690 blocks, 0.0%
>fragmentation)
>PCCARD Memory address set to 0xd0000
>Enable PC-card.xe0: xe: Probing
>xe0: Got version string (0x15)
>xe0: Got card ID (0x20)
>xe0: Card is Ethernet/modem combo
>xe0: Got MAC address (0x22)
>xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 3 slot 0 on pccard0
>xe0: attach
>xe0: Finding an aligned port for RealPort
>xe0: Hacking your Realport, master
>xe0: Realport port 0x100, size 0x10
>xe0: Xircom CEM56, bonding version 0x55, 100Mbps capable, with modem
>xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0
>xe0: Ethernet address 00:10:a4:bb:11:e8
>route: writing to routing socket: Network is unreachable
>Doing initial network setup: hostname.
>xe0: media_status
>xe0: media_change
>xe0: setmedia
>xe0: disable_intr
>xe0: soft_reset
>xe0: silicon revision = 5
>xe0: disable_intr
>xe0: PHY OK!
>xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
>xe0: Selecting 10baseT
>xe0: Setting LEDs
>xe0: init
>xe0: enable_intr
>xe0: init
>xe0: enable_intr
>xe0: init
>xe0: enable_intr
>lo0: flags=8049<xUP,LOOPBACK,RUNNeING,MULTICAST> m0tu 16384
>: inet6 fe80::1%l o0 prefixlen 64 mscopeid 0x2
>edia_status
> inet6 ::1 prefixxlen 128
> inete 127.0.0.1 netma0sk 0xff000000
>:xe0: flags=8843< UP,BROADCAST,RUNmNING,SIMPLEX,MULeTICAST> mtu 1500d
> inet 172.16.2i.4 netmask 0xfffafff00 broadcast _172.16.2.255
> isnet6 fe80::210:at4ff:febb:11e8%xea0 prefixlen 64 ttentative scopeidu 0x9
> ether 00s:10:a4:bb:11:e8
>
> media: 10baseT/UTP
> supported media: autoselect 10baseT/UTP 100baseTX
>add net default: gateway 172.16.2.2
>Additional routing options: tcp extensions=NO TCP keepalive=YES.
>routing daemons:.
>additional daemons: syslogd.
>Doing additional network setup: portmap.
>Starting final network daemons: nfsiod NFS access cache time=2.
>setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib
>/usr/local/lib
>setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
>starting standard daemons: inetd cron sshd.
>Initial rc.i386 initialization: apm apmd.
>rc.i386 configuring syscons: keymap keyrate blank_time screensaver moused.
>additional ABI support:.
>Local package initialization:.
>Additional TCP options:.
>Mon Oct 9 21:18:05 CEST 2000
>xe0: watchdog timeout; resetting card
>xe0: stop
>xe0: disable_intr
>xe0: hard_reset
>xe0: setmedia
>xe0: disable_intr
>xe0: soft_reset
>xe0: silicon revision = 5
>xe0: disable_intr
>xe0: PHY OK!
>xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
>xe0: Selecting 10baseT
>xe0: Setting LEDs
>xe0: init
>xe0: enable_intr
>xe0: init
>xe0: enable_intr
>
>xe0: media_status
>xe0: media_status
>xe0: watchdog timeout; resetting card
>xe0: stop
>xe0: disable_intr
>xe0: hard_reset
>xe0: setmedia
>xe0: disable_intr
>xe0: soft_reset
>xe0: silicon revision = 5
>xe0: disable_intr
>xe0: PHY OK!
>xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
>xe0: Selecting 10baseT
>xe0: Setting LEDs
>xe0: init
>xe0: enable_intr
>xe0: init
>xe0: enable_intr
>xe0: media_status
>xe0: media_status
>xe0: media_status
>xe0: media_status
>xe0: watchdog timeout; resetting card
>xe0: stop
>xe0: disable_intr
>xe0: hard_reset
>xe0: setmedia
>xe0: disable_intr
>xe0: soft_reset
>xe0: silicon revision = 5
>xe0: disable_intr
>xe0: PHY OK!
>xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
>xe0: Selecting 10baseT
>xe0: Setting LEDs
>xe0: init
>xe0: enable_intr
>xe0: init
>xe0: enable_intr
>xe0: watchdog timeout; resetting card
>xe0: stop
>xe0: disable_intr
>xe0: hard_reset
>xe0: setmedia
>xe0: disable_intr
>xe0: soft_reset
>xe0: silicon revision = 5
>xe0: disable_intr
>xe0: PHY OK!
>xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
>xe0: Selecting 10baseT
>xe0: Setting LEDs
>xe0: init
>xe0: enable_intr
>xe0: init
>xe0: enable_intr
>
>
>Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
>Waiting (max 60 seconds) for system process `syncer' to stop...stopped
>
>syncing disks... 10 1
>done
>Uptime: 5m7s
>Rebooting...
>ok boot
>|/-\|/-Copyright (c) 1992-2000 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
>FreeBSD 4.1-20001003-STABLE #1: Mon Oct 9 07:58:58 CEST 2000
> root@titan.klemm.gtn.com:/usr/src/sys/compile/LAPTOP
>Timecounter "i8254" frequency 1193182 Hz
>CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x683 Stepping = 3
>
>Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
>real memory = 201195520 (196480K bytes)
>avail memory = 192323584 (187816K bytes)
>Preloaded elf kernel "kernel" at 0xc034e000.
>VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02f0da2 (1000022)
>VESA: S3 Incorporated. M7 BIOS
>Pentium Pro MTRR support enabled
>md0: Malloc disk
>apm0: <APM BIOS> on motherboard
>apm: found APM BIOS v1.2, connected at v1.2
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
>pci0: <PCI bus> on pcib0
>pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
>pci1: <PCI bus> on pcib1
>pci1: <S3 model 8c12 graphics accelerator> at 0.0 irq 11
>isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on
>pci0
>ata0: at 0x1f0 irq 14 on atapci0
>ata1: at 0x170 irq 15 on atapci0
>pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11
>chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at
>device 5.3 on pci0
>pci0: <unknown card> (vendor=0x11c1, dev=0x0441) at 7.0 irq 3
>pci0: <unknown card> (vendor=0x1179, dev=0x0d01) at 9.0 irq 11
>pcm0: <Yamaha DS-1E (YMF744)> port 0xfefc-0xfeff,0xff00-0xff3f mem
>0xefff8000-0xefffffff irq 11 at device 12.0 on pci0
>fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>kbd0 at atkbd0
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model IntelliMouse, device ID 3
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x100>
>pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
>pcic0: management irq 10
>pccard0: <PC Card bus -- kludge version> on pcic0
>pccard1: <PC Card bus -- kludge version> on pcic0
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 16550A, console
>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
>ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/8 bytes threshold
>ppi0: <Parallel I/O> on ppbus0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>plip0: <PLIP network interface> on ppbus0
>ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master using UDMA33
>acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using UDMA33
>Mounting root from ufs:/dev/ad0s3a
>pccard: card inserted, slot 0
>swapon: adding /dev/ad0s3b as swap device
>Automatic boot in progress...
>/dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3a: clean, 31350 free (174 frags, 3897 blocks, 0.3% fragmentation)
>/dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3f: clean, 2377352 free (68312 frags, 288630 blocks, 2.4%
>fragmentation)
>/dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3e: clean, 253614 free (118 frags, 31687 blocks, 0.0%
>fragmentation)
>PCCARD Memory address set to 0xd0000
>Enable PC-card.xe0: xe: Probing
>xe0: Got version string (0x15)
>xe0: Got card ID (0x20)
>xe0: Card is Ethernet/modem combo
>xe0: Got MAC address (0x22)
>xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 9 slot 0 on pccard0
>xe0: attach
>xe0: Finding an aligned port for RealPort
>xe0: Hacking your Realport, master
>xe0: Realport port 0x100, size 0x10
>xe0: Xircom CEM56, bonding version 0x55, 100Mbps capable, with modem
>xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0
>xe0: Ethernet address 00:10:a4:bb:11:e8
>route: writing to routing socket: Network is unreachable
>Doing initial network setup: hostname.
>xe0: media_status
>xe0: media_change
>xe0: setmedia
>xe0: disable_intr
>xe0: soft_reset
>xe0: silicon revision = 5
>xe0: disable_intr
>xe0: PHY OK!
>xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
>xe0: Selecting 10baseT
>xe0: Setting LEDs
>xe0: init
>xe0: enable_intr
>xe0: init
>xe0: enable_intr
>xe0: init
>xe0: enable_intr
>lo0: flags=8049<xUP,LOOPBACK,RUNNeING,MULTICAST> m0tu 16384
>: inet6 fe80::1%l o0 prefixlen 64 mscopeid 0x2
>edia_status
> inet6 ::1 prefixxlen 128
> inete 127.0.0.1 netma0sk 0xff000000
>:xe0: flags=8843< UP,BROADCAST,RUNmNING,SIMPLEX,MULeTICAST> mtu 1500d
> inet 172.16.2i.4 netmask 0xfffafff00 broadcast _172.16.2.255
> isnet6 fe80::210:at4ff:febb:11e8%xea0 prefixlen 64 ttentative scopeidu 0x9
> ether 00s:10:a4:bb:11:e8
>
> media: 10baseT/UTP
> supported media: autoselect 10baseT/UTP 100baseTX
>add net default: gateway 172.16.2.2
>Additional routing options: tcp extensions=NO TCP keepalive=YES.
>routing daemons:.
>additional daemons: syslogd.
>Doing additional network setup: portmap.
>Starting final network daemons: nfsiod NFS access cache time=2.
>setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib
>/usr/local/lib
>setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
>starting standard daemons: inetd cron sshd.
>Initial rc.i386 initialization: apm apmd.
>rc.i386 configuring syscons: keymap keyrate blank_time screensaver moused.
>additional ABI support:.
>Local package initialization:.
>Additional TCP options:.
>Mon Oct 9 21:23:46 CEST 2000
>xe0: watchdog timeout; resetting card
>xe0: stop
>xe0: disable_intr
>xe0: hard_reset
>xe0: setmedia
>xe0: disable_intr
>xe0: soft_reset
>xe0: silicon revision = 5
>xe0: disable_intr
>xe0: PHY OK!
>xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
>xe0: Selecting 10baseT
>xe0: Setting LEDs
>xe0: init
>xe0: enable_intr
>xe0: init
>xe0: enable_intr
>
>xe0: media_status
>xe0: media_status
>xe0: media_status
>xe0: media_status
>xe0: watchdog timeout; resetting card
>xe0: stop
>xe0: disable_intr
>xe0: hard_reset
>xe0: setmedia
>xe0: disable_intr
>xe0: soft_reset
>xe0: silicon revision = 5
>xe0: disable_intr
>xe0: PHY OK!
>xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
>xe0: Selecting 10baseT
>xe0: Setting LEDs
>xe0: init
>xe0: enable_intr
>xe0: init
>xe0: enable_intr
>
>
>Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
>Waiting (max 60 seconds) for system process `syncer' to stop...stopped
>
>syncing disks... 10 1
>done
>Uptime: 1m22s
>Rebooting...
>ok boot
>|/-\|/-Copyright (c) 1992-2000 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
>FreeBSD 4.1-20001003-STABLE #1: Mon Oct 9 07:58:58 CEST 2000
> root@titan.klemm.gtn.com:/usr/src/sys/compile/LAPTOP
>Timecounter "i8254" frequency 1193182 Hz
>CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x683 Stepping = 3
>
>Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
>real memory = 201195520 (196480K bytes)
>avail memory = 192323584 (187816K bytes)
>Preloaded elf kernel "kernel" at 0xc034e000.
>VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02f0da2 (1000022)
>VESA: S3 Incorporated. M7 BIOS
>Pentium Pro MTRR support enabled
>md0: Malloc disk
>apm0: <APM BIOS> on motherboard
>apm: found APM BIOS v1.2, connected at v1.2
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
>pci0: <PCI bus> on pcib0
>pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
>pci1: <PCI bus> on pcib1
>pci1: <S3 model 8c12 graphics accelerator> at 0.0 irq 11
>isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on
>pci0
>ata0: at 0x1f0 irq 14 on atapci0
>ata1: at 0x170 irq 15 on atapci0
>pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11
>chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at
>device 5.3 on pci0
>pci0: <unknown card> (vendor=0x11c1, dev=0x0441) at 7.0 irq 3
>pci0: <unknown card> (vendor=0x1179, dev=0x0d01) at 9.0 irq 11
>pcm0: <Yamaha DS-1E (YMF744)> port 0xfefc-0xfeff,0xff00-0xff3f mem
>0xefff8000-0xefffffff irq 11 at device 12.0 on pci0
>fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>kbd0 at atkbd0
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model IntelliMouse, device ID 3
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x100>
>pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
>pcic0: management irq 10
>pccard0: <PC Card bus -- kludge version> on pcic0
>pccard1: <PC Card bus -- kludge version> on pcic0
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 16550A, console
>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
>ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/8 bytes threshold
>ppi0: <Parallel I/O> on ppbus0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>plip0: <PLIP network interface> on ppbus0
>pccard: card inserted, slot 0
>ata1-slave: ata_command: timeout waiting for intr
>ata1-slave: identify failed
>ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master using UDMA33
>acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using UDMA33
>Mounting root from ufs:/dev/ad0s3a
>swapon: adding /dev/ad0s3b as swap device
>Automatic boot in progress...
>/dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3a: clean, 31350 free (174 frags, 3897 blocks, 0.3% fragmentation)
>/dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3f: clean, 2377352 free (68312 frags, 288630 blocks, 2.4%
>fragmentation)
>/dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3e: clean, 253598 free (110 frags, 31686 blocks, 0.0%
>fragmentation)
>PCCARD Memory address set to 0xd0000
>Enable PC-card.xe0: xe: Probing
>xe0: Got version string (0x15)
>xe0: Got card ID (0x20)
>xe0: Card is Ethernet/modem combo
>xe0: Got MAC address (0x22)
>xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 10 slot 0 on pccard0
>xe0: attach
>xe0: Finding an aligned port for RealPort
>xe0: Cannot allocate irq
>device_probe_and_attach: xe0 attach returned 12
>Doing initial network setup: hostname.
>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
> inet6 ::1 prefixlen 128
> inet 127.0.0.1 netmask 0xff000000
>route: writing to routing socket: Network is unreachable
>add net default: gateway 172.16.2.2: Network is unreachable
>Additional routing options: tcp extensions=NO TCP keepalive=YES.
>routing daemons:.
>additional daemons: syslogd.
>Doing additional network setup: portmap.
>Starting final network daemons: nfsiod NFS access cache time=2.
>setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib
>/usr/local/lib
>setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
>starting standard daemons: inetd cron sshd.
>Initial rc.i386 initialization: apm apmd.
>rc.i386 configuring syscons: keymap keyrate blank_time screensaver moused.
>additional ABI support:.
>Local package initialization:.
>Additional TCP options:.
>Mon Oct 9 21:26:14 CEST 2000
>
>Oct 9 21:31:46 titan syslogd: exiting on signal 15
>Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
>Waiting (max 60 seconds) for system process `syncer' to stop...stopped
>
>syncing disks... 7
>done
>Uptime: 6m11s
>Rebooting...
>ok boot
>|/-\|/-Copyright (c) 1992-2000 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
>FreeBSD 4.1-20001003-STABLE #0: Mon Oct 9 21:31:12 CEST 2000
> root@titan.klemm.gtn.com:/usr/src/sys/compile/LAPTOP
>Timecounter "i8254" frequency 1193182 Hz
>CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x683 Stepping = 3
>
>Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
>real memory = 201195520 (196480K bytes)
>avail memory = 192323584 (187816K bytes)
>Preloaded elf kernel "kernel" at 0xc034e000.
>VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02f0d62 (1000022)
>VESA: S3 Incorporated. M7 BIOS
>Pentium Pro MTRR support enabled
>md0: Malloc disk
>apm0: <APM BIOS> on motherboard
>apm: found APM BIOS v1.2, connected at v1.2
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
>pci0: <PCI bus> on pcib0
>pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
>pci1: <PCI bus> on pcib1
>pci1: <S3 model 8c12 graphics accelerator> at 0.0 irq 11
>isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on
>pci0
>ata0: at 0x1f0 irq 14 on atapci0
>ata1: at 0x170 irq 15 on atapci0
>pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11
>chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at
>device 5.3 on pci0
>pci0: <unknown card> (vendor=0x11c1, dev=0x0441) at 7.0 irq 3
>pci0: <unknown card> (vendor=0x1179, dev=0x0d01) at 9.0 irq 11
>pcm0: <Yamaha DS-1E (YMF744)> port 0xfefc-0xfeff,0xff00-0xff3f mem
>0xefff8000-0xefffffff irq 11 at device 12.0 on pci0
>fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>kbd0 at atkbd0
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model IntelliMouse, device ID 3
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x100>
>pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 11 on isa0
>pcic0: management irq 13
>pccard0: <PC Card bus -- kludge version> on pcic0
>pccard1: <PC Card bus -- kludge version> on pcic0
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 16550A, console
>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
>ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/8 bytes threshold
>ppi0: <Parallel I/O> on ppbus0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>plip0: <PLIP network interface> on ppbus0
>ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master using UDMA33
>acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using UDMA33
>Mounting root from ufs:/dev/ad0s3a
>pccard: card inserted, slot 0
>swapon: adding /dev/ad0s3b as swap device
>Automatic boot in progress...
>/dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3a: clean, 31350 free (174 frags, 3897 blocks, 0.3% fragmentation)
>/dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3f: clean, 2370864 free (68000 frags, 287858 blocks, 2.4%
>fragmentation)
>/dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3e: clean, 253588 free (108 frags, 31685 blocks, 0.0%
>fragmentation)
>PCCARD Memory address set to 0xd0000
>Enable PC-card.xe0: xe: Probing
>xe0: Got version string (0x15)
>xe0: Got card ID (0x20)
>xe0: Card is Ethernet/modem combo
>xe0: Got MAC address (0x22)
>xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 10 slot 0 on pccard0
>xe0: attach
>xe0: Finding an aligned port for RealPort
>xe0: Hacking your Realport, master
>xe0: Realport port 0x100, size 0x10
>xe0: Xircom CEM56, bonding version 0x55, 100Mbps capable, with modem
>xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0
>xe0: Ethernet address 00:10:a4:bb:11:e8
>route: writing to routing socket: Network is unreachable
>Doing initial network setup: hostname.
>xe0: media_status
>xe0: media_change
>xe0: setmedia
>xe0: disable_intr
>xe0: soft_reset
>xe0: silicon revision = 5
>xe0: disable_intr
>xe0: PHY OK!
>xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
>xe0: Selecting 10baseT
>xe0: Setting LEDs
>xe0: init
>xe0: enable_intr
>xe0: init
>xe0: enable_intr
>xe0: init
>xe0: enable_intr
>lo0: flags=8049<xUP,LOOPBACK,RUNNeING,MULTICAST> m0tu 16384
>: inet6 fe80::1%l o0 prefixlen 64 mscopeid 0x2
>edia_status
> inet6 ::1 prefixxlen 128
> inete 127.0.0.1 netma0sk 0xff000000
>:xe0: flags=8843< UP,BROADCAST,RUNmNING,SIMPLEX,MULeTICAST> mtu 1500d
> inet 172.16.2i.4 netmask 0xfffafff00 broadcast _172.16.2.255
> isnet6 fe80::210:at4ff:febb:11e8%xea0 prefixlen 64 ttentative scopeidu 0x9
> ether 00s:10:a4:bb:11:e8
>
> media: 10baseT/UTP
> supported media: autoselect 10baseT/UTP 100baseTX
>add net default: gateway 172.16.2.2
>Additional routing options: tcp extensions=NO TCP keepalive=YES.
>routing daemons:.
>additional daemons: syslogd.
>Doing additional network setup: portmap.
>Starting final network daemons: nfsiod NFS access cache time=2.
>setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib
>/usr/local/lib
>setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
>starting standard daemons: inetd cron sshd.
>Initial rc.i386 initialization: apm apmd.
>rc.i386 configuring syscons: keymap keyrate blank_time screensaver moused.
>additional ABI support:.
>Local package initialization:.
>Additional TCP options:.
>Mon Oct 9 21:33:07 CEST 2000
>xe0: watchdog timeout; resetting card
>xe0: stop
>xe0: disable_intr
>xe0: hard_reset
>xe0: setmedia
>xe0: disable_intr
>xe0: soft_reset
>xe0: silicon revision = 5
>xe0: disable_intr
>xe0: PHY OK!
>xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
>xe0: Selecting 10baseT
>xe0: Setting LEDs
>xe0: init
>xe0: enable_intr
>xe0: init
>xe0: enable_intr
>
>xe0: watchdog timeout; resetting card
>xe0: stop
>xe0: disable_intr
>xe0: hard_reset
>xe0: setmedia
>xe0: disable_intr
>xe0: soft_reset
>xe0: silicon revision = 5
>xe0: disable_intr
>xe0: PHY OK!
>xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
>xe0: Selecting 10baseT
>xe0: Setting LEDs
>xe0: init
>xe0: enable_intr
>xe0: init
>xe0: enable_intr
>Code 136 not found
>Code 136 not found
>code Unknown ignored
>Code 138 not found
>Code 138 not found
>code Unknown ignored
>Code 139 not found
>Code 139 not found
>code Unknown ignored
>Configuration data for card in slot 0
>Tuple #1, code = 0x1 (Common memory descriptor), length = 2
> 000: 00 ff
> Common memory device information:
> Device number 1, type No device, WPS = OFF
> Speed = No speed, Memory block size = reserved, 32 units
>Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2
> 000: 00 ff
> Attribute memory device information:
> Device number 1, type No device, WPS = OFF
> Speed = No speed, Memory block size = reserved, 32 units
>Tuple #3, code = 0x15 (Version 1 info), length = 59
> 000: 05 00 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43
> 010: 61 72 64 20 45 74 68 65 72 6e 65 74 20 31 30 2f
> 020: 31 30 30 20 2b 20 4d 6f 64 65 6d 20 35 36 00 43
> 030: 45 4d 35 36 00 31 2e 30 30 00 ff
> Version = 5.0, Manuf = [Xircom], card vers = [CreditCard Ethernet 10/100 +
>Modem 56]
> Addit. info = [CEM56],[1.00]
>Tuple #4, code = 0x0 (Null tuple), length = 8
> 000: e8 11 bb 00 00 00 00 00
>Tuple #5, code = 0x20 (Manufacturer ID), length = 5
> 000: 05 01 0a 11 46
> PCMCIA ID = 0x105, OEM ID = 0x110a
>Tuple #6, code = 0x44 (Card init date), length = 4
> 000: 41 43 a1 28
>Tuple #7, code = 0x1a (Configuration map), length = 5
> 000: 01 3f 80 ff 67
> Reg len = 2, config register addr = 0xff80, last config = 0x3f
> Registers: XXX--XX-
>Tuple #8, code = 0x1b (Configuration entry), length = 20
> 000: e7 c1 9d 0f 55 4d 5d 4e e0 17 17 ea 60 e8 02 07
> 010: f0 bc 8e 20
> Config index = 0x27(default)
> Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported
> Vcc pwr:
> Nominal operating supply voltage: 5 x 1V
> Minimum operating supply voltage: 4.5 x 1V
> Maximum operating supply voltage: 5.5 x 1V
> Continuous supply current: 4.5 x 100mA
> Wait scale Speed = 1.2 x 10 ms
> RDY/BSY scale Speed = 1.2 x 10 ms
> Card decodes 10 address lines, full 8/16 Bit I/O
> I/O address # 1: block start = 0x2e8 block length = 0x8
> IRQ modes: Level, Pulse, Shared
> IRQs: 2 3 4 5 7 9 10 11 15
> Max twin cards = 0
> Misc attr: (Power down supported)
>Tuple #9, code = 0x1b (Configuration entry), length = 7
> 000: 1f 08 ea 60 e8 03 07
> Config index = 0x1f
> Card decodes 10 address lines, full 8/16 Bit I/O
> I/O address # 1: block start = 0x3e8 block length = 0x8
>Tuple #10, code = 0x1b (Configuration entry), length = 7
> 000: 17 08 ea 60 f8 02 07
> Config index = 0x17
> Card decodes 10 address lines, full 8/16 Bit I/O
> I/O address # 1: block start = 0x2f8 block length = 0x8
>Tuple #11, code = 0x1b (Configuration entry), length = 7
> 000: 0f 08 ea 60 f8 03 07
> Config index = 0xf
> Card decodes 10 address lines, full 8/16 Bit I/O
> I/O address # 1: block start = 0x3f8 block length = 0x8
>Tuple #12, code = 0x1b (Configuration entry), length = 3
> 000: 3f 08 63
> Config index = 0x3f
> Card decodes 3 address lines, full 8/16 Bit I/O
>Tuple #13, code = 0x21 (Functional ID), length = 2
> 000: 02 00
> Serial port/modem
>Tuple #14, code = 0x22 (Functional EXT), length = 4
> 000: 00 02 0f 5c
> Serial interface extension:
> 16550 UART, Parity - Space,Mark,Odd,Even
> Data bit - 7bit,8bit, Stop bit - 1bit,2bit
>Tuple #15, code = 0x22 (Functional EXT), length = 12
> 000: 02 06 00 3f 1c 03 03 0f 07 00 01 b5
> Data modem services available:
>Tuple #16, code = 0x22 (Functional EXT), length = 8
> 000: 13 06 00 0b 00 02 00 b5
> Fax1/modem services available:
>Tuple #17, code = 0x21 (Functional ID), length = 2
> 000: 06 00
> Network/LAN adapter
>Tuple #18, code = 0x22 (Functional EXT), length = 8
> 000: 04 06 00 10 a4 bb 11 e8
> Network node ID: 00 10 a4 bb 11 e8
>Tuple #19, code = 0x0 (Null tuple), length = 12
> 000: 32 30 30 31 48 57 42 42 31 31 45 38
>Tuple #20, code = 0x0 (Null tuple), length = 4
> 000: 01 00 00 00
>Tuple #21, code = 0x14 (No link), length = 0
>Tuple #22, code = 0xff (Terminator), length = 0
>2 slots found
># Default PCCARD configuration file
>#
># Removing all IRQ conflicts from this file can't be done because of some
># IRQ-selfish PC-cards. So if you want to use some of these cards in
># your machine, you will be forced to modify their IRQ parameters from
># the following list.
>#
># IRQ == 0 means "allocate free IRQ from IRQ pool"
># IRQ == 16 means "do not use IRQ (e.g. PIO mode)"
>#
># $FreeBSD: src/etc/defaults/pccard.conf,v 1.98.2.5 2000/09/22 10:12:08
>sanpei Exp $
>#
># Send new entries for this file to imp@freebsd.org. He's volunteered
># to act as coordinator for this file.
>#
>
># Generally available IO ports
>io 0x240-0x360
># Generally available IRQs (Built-in sound-card owners remove 5)
>irq 3 5 9 10 11 15
># Available memory slots
>memory 0xd4000 96k
>
># Xircom Realport card + modem
>card "Xircom" "16-bit Ethernet + Modem 56"
> config 0x27 "xe" 9
> insert /etc/pccard_ether $device
> remove /etc/pccard_ether $device delete
>
># Xircom CreditCard Ethernet 10/100
>card "Xircom" "CreditCard 10/100"
> config 0x1 "xe" ?
> insert /etc/pccard_ether $device
> remove /etc/pccard_ether $device delete
>
># Xircom CreditCard 10Base-T "CreditCard Ethernet Adaptor IIps" (PS-CE2-10)
>card "Xircom" "CreditCard 10Base-T"
> config auto "xe" ?
> insert /etc/pccard_ether $device
> remove /sbin/ifconfig $device delete
>
># Xircom CreditCard Ethernet 10/100 + modem (Ethernet part)
>card "Xircom" "CreditCard Ethernet 10/100 + Modem 56"
> config 0x27 "xe" 10
> insert /etc/pccard_ether $device
> remove /sbin/ifconfig $device delete
>machine i386
>cpu I686_CPU
>ident LAPTOP
>maxusers 100
>
>options INET #InterNETworking
>options INET6 #IPv6 communications protocols
>options FFS #Berkeley Fast Filesystem
>options FFS_ROOT #FFS usable as root device [keep this!]
>options SOFTUPDATES #Enable FFS soft updates support
>options MFS #Memory Filesystem
>options MD_ROOT #MD is a potential root device
>options NFS #Network Filesystem
>options MSDOSFS #MSDOS Filesystem
>options CD9660 #ISO 9660 Filesystem
>options CD9660_ROOT #CD-ROM usable as root, CD9660 required
>options PROCFS #Process filesystem
>options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
>options UCONSOLE #Allow users to grab the console
>options KTRACE #ktrace(1) support
>options SYSVSHM #SYSV-style shared memory
>options SYSVMSG #SYSV-style message queues
>options SYSVSEM #SYSV-style semaphores
>options P1003_1B #Posix P1003_1B real-time extensions
>options _KPOSIX_PRIORITY_SCHEDULING
>options ICMP_BANDLIM #Rate limit bad replies
>options KBD_INSTALL_CDEV # install a CDEV entry in /dev
>
>device isa
>device pci
>
># Floppy drives
>device fdc0 at isa? port IO_FD1 irq 6 drq 2
>device fd0 at fdc0 drive 0
>
># ATA and ATAPI devices
>device ata0 at isa? port IO_WD1 irq 14
>device ata1 at isa? port IO_WD2 irq 15
>device ata
>device atadisk # ATA disk drives
>device atapicd # ATAPI CDROM drives
>device atapifd # ATAPI floppy drives
>device atapist # ATAPI tape drives
>options ATA_STATIC_ID #Static device numbering
>options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
>
># atkbdc0 controls both the keyboard and the PS/2 mouse
>device atkbdc0 at isa? port IO_KBD
>device atkbd0 at atkbdc? irq 1 flags 0x1
>device psm0 at atkbdc? irq 12
>
>device vga0 at isa?
>pseudo-device splash
>
># syscons is the default console driver, resembling an SCO console
>device sc0 at isa? flags 0x100
>
># Floating point support - do not disable.
>device npx0 at nexus? port IO_NPX irq 13
>
># Power management support (see LINT for more options)
>device apm0 at nexus? flags 0x20
>
># PCCARD (PCMCIA) support
>device card
>#device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000
>device pcic0 at isa? irq 11 port 0x3e0 iomem 0xd0000
>#device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable
>
># Serial (COM) ports
>device sio0 at isa? port IO_COM1 flags 0x10 irq 4
>#device sio1 at isa? port IO_COM2 irq 3
>#device sio2 at isa? disable port IO_COM3 irq 5
>#device sio3 at isa? disable port IO_COM4 irq 9
>
># Parallel port
>device ppc0 at isa? irq 7
>device ppbus # Parallel port bus (required)
>device lpt # Printer
>device plip # TCP/IP over parallel
>device ppi # Parallel port interface device
>
># Xircom Ethernet
>device xe
>
># Pseudo devices - the number indicates how many units to allocated.
>pseudo-device loop # Network loopback
>pseudo-device ether # Ethernet support
>pseudo-device ppp 1 # Kernel PPP
>pseudo-device tun # Packet tunnel.
>pseudo-device pty # Pseudo-ttys (telnet etc)
>pseudo-device md # Memory "disks"
>pseudo-device gif 4 # IPv6 and IPv4 tunneling
>pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
>
># The `bpf' pseudo-device enables the Berkeley Packet Filter.
># Be aware of the administrative consequences of enabling this!
>pseudo-device bpf #Berkeley packet filter
>
>options INCLUDE_CONFIG_FILE # Include this file in kernel
>
>options PPP_BSDCOMP #PPP BSD-compress support
>options PPP_DEFLATE #PPP zlib/deflate/gzip support
>options PPP_FILTER #enable bpf filtering (needs bpf)
>
>options MROUTING # Multicast routing
>
># To include support for VESA video modes
>options VESA
>
>#device pcm0 at isa? irq 10 drq 1 flags 0x0
>device pcm
>
>
>--
>Andreas Klemm Powered by FreeBSD
>SMP
>Songs from our band
>>>64Bits<<............http://www.apsfilter.org/64bits.html
>My homepage................................
>http://people.FreeBSD.ORG/~andreas
>Please note: Apsfilter got a NEW
>HOME................http://www.apsfilter.org/
>
>----------
--------------------------
Fabio Amorim
_________________________________________________________
Oi! Você quer um iG-mail gratuito?
Então clique aqui: http://www.ig.com.br/paginas/assineigmail.html
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001009204619.EDE7137B503>