Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 06 Jan 2018 20:42:13 +0000
From:      bugzilla-noreply@freebsd.org
To:        freebsd-bugs@FreeBSD.org
Subject:   [Bug 184059] [mps] mps SCSI driver causes FreeBSD to hang during boot when running as a virtual machine.
Message-ID:  <bug-184059-8-RfnitdpZdc@https.bugs.freebsd.org/bugzilla/>
In-Reply-To: <bug-184059-8@https.bugs.freebsd.org/bugzilla/>
References:  <bug-184059-8@https.bugs.freebsd.org/bugzilla/>

next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D184059

Dave Blundell <blundar@gmail.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |blundar@gmail.com

--- Comment #3 from Dave Blundell <blundar@gmail.com> ---
This behavior isn't just KVM.  I have a similar but different setup that is
hanging at mps0 on boot under ESXi 5.5.

I'm using VMware ESXi 5.5.0 build 2068190 on a Supermicro X10SLL-F with an
E3-1230v3 and 32Gb RAM with PCIe pass through for the LSI card.  The card i=
s a
LSI2116 with the latest IT firmware (20.00.07.00).  I'm using FreeNAS11 bui=
lt
as of Jan6-2018 for the guest image.  On bootup, the screen hangs at the mp=
s0:
prompt.  If I disable PCI pass through, the system boots normally (without =
the
drives connected to the LSI card, of course.)

I tested the exact same card and FreeNAS image on a non-virtualized physical
machine (AMD A8 APU 8Gb RAM) and it worked perfectly for weeks.  The exact =
same
FreeNAS image and card locks up on boot in the Supermicro system - I made t=
he
VM image from the USB stick that worked in the physical machine.

I know that the VM Host is at least somewhat FreeBSD friendly as I'm posting
this through a pfSense firewall hosted on the same box. (Don't virtualize y=
our
firewall, I know I know I know)

I know that PCIe passthrough works on this host because it has been running
pass through on a 8 port LSI3081E card for years with zero trouble and
Freenas8.

I also had PCIe pass through running on this host with a LSI2108 card with
older firmware.  However, I experienced some errors due to a firmware misma=
tch
between the card and FreeBSD's driver, which is a known issue for these car=
ds.

Prepared firmware, tested LSI2116 card on physical machine with FreeNAS11 -
worked perfect.

Pulled LSi3081E, replaced with flashed LSI2116 card in VMHost: FreeNAS8 sees
mps0 but won't talk to it, doesn't detect any disks but boots fine.

Upgrade FreeNAS8 to current version via web updater - hangs at boot at mps0

Copy exact FreeNAS image which worked on physical machine to VMHost - ident=
ical
behavior, hang at mps0 on boot.

dmesg from VM with PCI passthrough DISABLED:
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-STABLE #0 r321665+d4625dcee3e(freenas/11.1-stable): Wed Dec 13
16:33:42 UTC 2017
=20=20=20
root@gauntlet:/freenas-11-releng/freenas/_BE/objs/freenas-11-releng/freenas=
/_BE/os/sys/FreeNAS.amd64
amd64
FreeBSD clang version 5.0.0 (tags/RELEASE_500/final 312559) (based on LLVM
5.0.0svn)
CPU: Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz (3300.00-MHz K8-class CPU)
  Origin=3D"GenuineIntel"  Id=3D0x306c3  Family=3D0x6  Model=3D0x3c  Steppi=
ng=3D3
=20
Features=3D0x1fa3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,=
MCA,CMOV,PAT,PSE36,DTS,MMX,FXSR,SSE,SSE2,SS,HTT>
=20
Features2=3D0x9ed83203<SSE3,PCLMULQDQ,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,PO=
PCNT,AESNI,XSAVE,OSXSAVE,AVX,HV>
  AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=3D0x1<LAHF>
  TSC: P-state invariant
Hypervisor: Origin =3D "VMwareVMware"
real memory  =3D 13958643712 (13312 MB)
avail memory =3D 12416217088 (11841 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <PTLTD          APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 2 core(s)
WARNING: VIMAGE (virtualized network stack) is a highly experimental featur=
e.
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
random: entropy device external interface
kbd1 at kbdmux0
nexus0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
padlock0: No ACE support.
acpi0: <INTEL 440BX> on motherboard
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
cpu0: <ACPI CPU> numa-domain 0 on acpi0
cpu1: <ACPI CPU> numa-domain 0 on acpi0
cpu2: <ACPI CPU> numa-domain 0 on acpi0
cpu3: <ACPI CPU> numa-domain 0 on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1060-0x106f at device 7.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pci0: <bridge> at device 7.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0x1070-0x107f mem
0xec000000-0xefffffff,0xfe000000-0xfe7fffff irq 16 at device 15.0 on pci0
vgapci0: Boot video device
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1400-0x14ff mem
0xfeba0000-0xfebbffff,0xfebc0000-0xfebdffff irq 17 at device 16.0 on pci0
mpt0: MPI Version=3D1.2.0.0
pcib2: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> port 0x2000-0x203f=
 mem
0xfd5c0000-0xfd5dffff,0xfdff0000-0xfdffffff irq 18 at device 0.0 on pci2
em0: Ethernet address: 00:0c:29:30:58:66
em0: link state changed to UP
em1: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> port 0x2040-0x207f=
 mem
0xfd5a0000-0xfd5bffff,0xfdfe0000-0xfdfeffff irq 16 at device 2.0 on pci2
em1: Ethernet address: 00:0c:29:30:58:70
em1: link state changed to UP
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pcib3: [GIANT-LOCKED]
pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pcib4: [GIANT-LOCKED]
pcib5: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pcib5: [GIANT-LOCKED]
pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pcib6: [GIANT-LOCKED]
pcib7: <ACPI PCI-PCI bridge> at device 21.4 on pci0
pcib7: [GIANT-LOCKED]
pcib8: <ACPI PCI-PCI bridge> at device 21.5 on pci0
pcib8: [GIANT-LOCKED]
pcib9: <ACPI PCI-PCI bridge> at device 21.6 on pci0
pcib9: [GIANT-LOCKED]
pcib10: <ACPI PCI-PCI bridge> at device 21.7 on pci0
pcib10: [GIANT-LOCKED]
pcib11: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pcib11: [GIANT-LOCKED]
pcib12: <ACPI PCI-PCI bridge> at device 22.1 on pci0
pcib12: [GIANT-LOCKED]
pcib13: <ACPI PCI-PCI bridge> at device 22.2 on pci0
pcib13: [GIANT-LOCKED]
pcib14: <ACPI PCI-PCI bridge> at device 22.3 on pci0
pcib14: [GIANT-LOCKED]
pcib15: <ACPI PCI-PCI bridge> at device 22.4 on pci0
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
acpi_syscontainer0: <System Container> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xca000-0xcafff,0xcb000-0xcbfff,0xdc000-0xdffff,0xe0000-0xe=
7fff
on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
coretemp0: Tj(target) value 0 does not seem right.
coretemp1: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu1
coretemp1: Tj(target) value 0 does not seem right.
coretemp2: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu2
coretemp2: Tj(target) value 0 does not seem right.
coretemp3: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu3
coretemp3: Tj(target) value 0 does not seem right.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
freenas_sysctl: adding account.
freenas_sysctl: adding directoryservice.
freenas_sysctl: adding middlewared.
freenas_sysctl: adding network.
freenas_sysctl: adding services.
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept,
logging disabled
usb_needs_explore_all: no devclass
nvme cam probe device init
da0 at mpt0 bus 0 scbus2 target 0 lun 0
da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing enabled
da0: 16384MB (33554432 512 byte sectors)
da0: quirks=3D0x140<RETRY_BUSY,STRICT_UNMAP>
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <NECVMWar VMware IDE CDR10 1.00> Removable CD-ROM SCSI device
cd0: Serial Number 10000000000000000001
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd0: quirks=3D0x40<RETRY_BUSY>
random: unblocking device.
Trying to mount root from zfs:freenas-boot/ROOT/11.1-RELEASE []...
warning: KLD '/boot/kernel/smbus.ko' is newer than the linker.hints file
warning: KLD '/boot/kernel/vmm.ko' is newer than the linker.hints file
vmx_init: processor does not support VMX operation
module_register_init: MOD_LOAD (vmm, 0xffffffff82824400, 0) error 6
GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
warning: KLD '/boot/kernel/sdt.ko' is newer than the linker.hints file
warning: KLD '/boot/kernel/systrace.ko' is newer than the linker.hints file
warning: KLD '/boot/kernel/systrace_freebsd32.ko' is newer than the
linker.hints file
warning: KLD '/boot/kernel/profile.ko' is newer than the linker.hints file
hwpc_core: unknown PMC architecture: 1
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>
warning: KLD '/boot/kernel/t3_tom.ko' is newer than the linker.hints file
warning: KLD '/boot/kernel/toecore.ko' is newer than the linker.hints file
warning: KLD '/boot/kernel/t4_tom.ko' is newer than the linker.hints file
VMware memory control driver initialized
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 done
All buffers synced.
Uptime: 1m45s
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-STABLE #0 r321665+d4625dcee3e(freenas/11.1-stable): Wed Dec 13
16:33:42 UTC 2017
=20=20=20
root@gauntlet:/freenas-11-releng/freenas/_BE/objs/freenas-11-releng/freenas=
/_BE/os/sys/FreeNAS.amd64
amd64
FreeBSD clang version 5.0.0 (tags/RELEASE_500/final 312559) (based on LLVM
5.0.0svn)
CPU: Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz (3300.00-MHz K8-class CPU)
  Origin=3D"GenuineIntel"  Id=3D0x306c3  Family=3D0x6  Model=3D0x3c  Steppi=
ng=3D3
=20
Features=3D0x1fa3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,=
MCA,CMOV,PAT,PSE36,DTS,MMX,FXSR,SSE,SSE2,SS,HTT>
=20
Features2=3D0x9ed83203<SSE3,PCLMULQDQ,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,PO=
PCNT,AESNI,XSAVE,OSXSAVE,AVX,HV>
  AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=3D0x1<LAHF>
  TSC: P-state invariant
Hypervisor: Origin =3D "VMwareVMware"
real memory  =3D 13958643712 (13312 MB)
avail memory =3D 12416217088 (11841 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <PTLTD          APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 2 core(s)
WARNING: VIMAGE (virtualized network stack) is a highly experimental featur=
e.
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
random: entropy device external interface
kbd1 at kbdmux0
nexus0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
padlock0: No ACE support.
acpi0: <INTEL 440BX> on motherboard
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
cpu0: <ACPI CPU> numa-domain 0 on acpi0
cpu1: <ACPI CPU> numa-domain 0 on acpi0
cpu2: <ACPI CPU> numa-domain 0 on acpi0
cpu3: <ACPI CPU> numa-domain 0 on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1060-0x106f at device 7.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pci0: <bridge> at device 7.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0x1070-0x107f mem
0xec000000-0xefffffff,0xfe000000-0xfe7fffff irq 16 at device 15.0 on pci0
vgapci0: Boot video device
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1400-0x14ff mem
0xfeba0000-0xfebbffff,0xfebc0000-0xfebdffff irq 17 at device 16.0 on pci0
mpt0: MPI Version=3D1.2.0.0
pcib2: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> port 0x2000-0x203f=
 mem
0xfd5c0000-0xfd5dffff,0xfdff0000-0xfdffffff irq 18 at device 0.0 on pci2
em0: Ethernet address: 00:0c:29:30:58:66
em0: link state changed to UP
em1: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> port 0x2040-0x207f=
 mem
0xfd5a0000-0xfd5bffff,0xfdfe0000-0xfdfeffff irq 16 at device 2.0 on pci2
em1: Ethernet address: 00:0c:29:30:58:70
em1: link state changed to UP
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pcib3: [GIANT-LOCKED]
pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pcib4: [GIANT-LOCKED]
pcib5: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pcib5: [GIANT-LOCKED]
pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pcib6: [GIANT-LOCKED]
pcib7: <ACPI PCI-PCI bridge> at device 21.4 on pci0
pcib7: [GIANT-LOCKED]
pcib8: <ACPI PCI-PCI bridge> at device 21.5 on pci0
pcib8: [GIANT-LOCKED]
pcib9: <ACPI PCI-PCI bridge> at device 21.6 on pci0
pcib9: [GIANT-LOCKED]
pcib10: <ACPI PCI-PCI bridge> at device 21.7 on pci0
pcib10: [GIANT-LOCKED]
pcib11: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pcib11: [GIANT-LOCKED]
pcib12: <ACPI PCI-PCI bridge> at device 22.1 on pci0
pcib12: [GIANT-LOCKED]
pcib13: <ACPI PCI-PCI bridge> at device 22.2 on pci0
pcib13: [GIANT-LOCKED]
pcib14: <ACPI PCI-PCI bridge> at device 22.3 on pci0
pcib14: [GIANT-LOCKED]
pcib15: <ACPI PCI-PCI bridge> at device 22.4 on pci0
pcib15: [GIANT-LOCKED]
pcib16: <ACPI PCI-PCI bridge> at device 22.5 on pci0
pcib16: [GIANT-LOCKED]
pcib17: <ACPI PCI-PCI bridge> at device 22.6 on pci0
pcib17: [GIANT-LOCKED]
pcib18: <ACPI PCI-PCI bridge> at device 22.7 on pci0
pcib18: [GIANT-LOCKED]
pcib19: <ACPI PCI-PCI bridge> at device 23.0 on pci0
pcib19: [GIANT-LOCKED]
pcib20: <ACPI PCI-PCI bridge> at device 23.1 on pci0
pcib20: [GIANT-LOCKED]
pcib21: <ACPI PCI-PCI bridge> at device 23.2 on pci0
pcib21: [GIANT-LOCKED]
pcib22: <ACPI PCI-PCI bridge> at device 23.3 on pci0
pcib22: [GIANT-LOCKED]
pcib23: <ACPI PCI-PCI bridge> at device 23.4 on pci0
pcib23: [GIANT-LOCKED]
pcib24: <ACPI PCI-PCI bridge> at device 23.5 on pci0
pcib24: [GIANT-LOCKED]
pcib25: <ACPI PCI-PCI bridge> at device 23.6 on pci0
pcib25: [GIANT-LOCKED]
pcib26: <ACPI PCI-PCI bridge> at device 23.7 on pci0
pcib26: [GIANT-LOCKED]
pcib27: <ACPI PCI-PCI bridge> at device 24.0 on pci0
pcib27: [GIANT-LOCKED]
pcib28: <ACPI PCI-PCI bridge> at device 24.1 on pci0
pcib28: [GIANT-LOCKED]
pcib29: <ACPI PCI-PCI bridge> at device 24.2 on pci0
pcib29: [GIANT-LOCKED]
pcib30: <ACPI PCI-PCI bridge> at device 24.3 on pci0
pcib30: [GIANT-LOCKED]
pcib31: <ACPI PCI-PCI bridge> at device 24.4 on pci0
pcib31: [GIANT-LOCKED]
pcib32: <ACPI PCI-PCI bridge> at device 24.5 on pci0
pcib32: [GIANT-LOCKED]
pcib33: <ACPI PCI-PCI bridge> at device 24.6 on pci0
pcib33: [GIANT-LOCKED]
pcib34: <ACPI PCI-PCI bridge> at device 24.7 on pci0
pcib34: [GIANT-LOCKED]
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
acpi_syscontainer0: <System Container> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xca000-0xcafff,0xcb000-0xcbfff,0xdc000-0xdffff,0xe0000-0xe=
7fff
on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
coretemp0: Tj(target) value 0 does not seem right.
coretemp1: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu1
coretemp1: Tj(target) value 0 does not seem right.
coretemp2: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu2
coretemp2: Tj(target) value 0 does not seem right.
coretemp3: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu3
coretemp3: Tj(target) value 0 does not seem right.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
freenas_sysctl: adding account.
freenas_sysctl: adding directoryservice.
freenas_sysctl: adding middlewared.
freenas_sysctl: adding network.
freenas_sysctl: adding services.
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept,
logging disabled
usb_needs_explore_all: no devclass
nvme cam probe device init
da0 at mpt0 bus 0 scbus2 target 0 lun 0
da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing enabled
da0: 16384MB (33554432 512 byte sectors)
da0: quirks=3D0x140<RETRY_BUSY,STRICT_UNMAP>
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <NECVMWar VMware IDE CDR10 1.00> Removable CD-ROM SCSI device
cd0: Serial Number 10000000000000000001
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
acpi_syscontainer0: <System Container> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xca000-0xcafff,0xcb000-0xcbfff,0xdc000-0xdffff,0xe0000-0xe=
7fff
on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
coretemp0: Tj(target) value 0 does not seem right.
coretemp1: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu1
coretemp1: Tj(target) value 0 does not seem right.
coretemp2: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu2
coretemp2: Tj(target) value 0 does not seem right.
coretemp3: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu3
coretemp3: Tj(target) value 0 does not seem right.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
freenas_sysctl: adding account.
freenas_sysctl: adding directoryservice.
freenas_sysctl: adding middlewared.
freenas_sysctl: adding network.
freenas_sysctl: adding services.
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept,
logging disabled
usb_needs_explore_all: no devclass
nvme cam probe device init
da0 at mpt0 bus 0 scbus2 target 0 lun 0
da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing enabled
da0: 16384MB (33554432 512 byte sectors)
da0: quirks=3D0x140<RETRY_BUSY,STRICT_UNMAP>
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <NECVMWar VMware IDE CDR10 1.00> Removable CD-ROM SCSI device
cd0: Serial Number 10000000000000000001
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd0: quirks=3D0x40<RETRY_BUSY>
random: unblocking device.
Trying to mount root from zfs:freenas-boot/ROOT/11.1-RELEASE []...
vmx_init: processor does not support VMX operation
module_register_init: MOD_LOAD (vmm, 0xffffffff82824400, 0) error 6
GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
hwpc_core: unknown PMC architecture: 1
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>
VMware memory control driver initialized

--=20
You are receiving this mail because:
You are the assignee for the bug.=



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-184059-8-RfnitdpZdc>