Date: Wed, 28 Jun 2000 13:25:59 -0400 From: "Marc Levesque" <mlevesqu@licef.teluq.uquebec.ca> To: "'Koster, K.J.'" <K.J.Koster@kpn.com> Cc: <freebsd-hardware@FreeBSD.ORG> Subject: RE: SysKonnect SK-9841 ! Message-ID: <000001bfe125$edc03720$4458a7ce@licef.teluq.uquebec.ca> In-Reply-To: <59063B5B4D98D311BC0D0001FA7E4522026D76C8@l04.research.kpn.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks, it's supposed to give something like that: skc0: <SysKonnect Gigabit Ethernet> rev 0x10 int a irq 11 on pci0.14.0 skc0: SysKonnect SK-NET Gigabit Ethernet Adapter SK-9844 SX dual link sk0: <XaQti Corp. XMAC II> at skc0 port 0 sk0: Ethernet address: 00:00:5a:98:21:6c It's a device define in my kernel conf file ! I already tried skc0....dont recognize by /usr/sbin/config ! This card can be use in a PCI32 or a PCI64 slot...Maybe the FreeBSD driver only works when the card are in a PCI64 ? Anyone can confirm it ? Thanks Marc Levesque mlevesqu@licef.teluq.uquebec.ca > -----Original Message----- > From: Koster, K.J. [mailto:K.J.Koster@kpn.com] > Sent: Wednesday, June 28, 2000 12:45 PM > To: 'mlevesqu@licef.teluq.uquebec.ca' > Cc: freebsd-hardware@FreeBSD.ORG > Subject: RE: SysKonnect SK-9841 ! > > > > > > It dont see the sk0 device... > > > > skc0: SysKonnect SK-NET Gigabit Ethernet Adapter SK-9841 > > LX > > > Umm. Would it not be called /dev/skc0, and not /dev/sk0? > > If it's not there, perhaps you have to > > cd /dev > sh MAKEDEV skc0 > > Just a thought. > > Kees Jan > > ================================================= > TV is the worst of both worlds. It's not as > good at words as radio is because the pictures > are a distraction which demand attention, and > it's not as good as cinema because the pictures > are not nearly as good. > Douglas Adams > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001bfe125$edc03720$4458a7ce>