Date: Mon, 15 Apr 2002 16:09:17 -0500 From: "Charles Pelletier" <fozekizer@attbi.com> Cc: <freebsd-questions@FreeBSD.ORG> Subject: Re: ipv4 gateway Message-ID: <028701c1e4c1$ce03c860$32040101@socrates> References: <20020415173143.1292.qmail@web14404.mail.yahoo.com> <1018904235.1724.25.camel@turtle.lewiz.org>
index | next in thread | previous in thread | raw e-mail
>
> On Mon, 2002-04-15 at 17:31, milan nankov wrote:
> >
> > Hello,
> >
> > I receive the following error message when i try to set up the settings
of my lancard my druging the freebsd setup:
> >
> > "Invalid ipv4 gataway address" (i receive by DHCP my host ->
212-116-134-198.evrocom.net
> >
> >
domain -> evrocom.net
> >
> > ***
gateway -> 212.116.135.1
> >
> > name
server -> 212.39.92.2
> >
> >
ip -> 212.116.134.198
> >
> >
mask -> 255.255.255.0 )
> >
> > What is causing this error ?
> >
> > What's wrong with the gateway address(ip) ?
as shown, nothing is wrong. but, i believe you might either have a typo
somewhere or you set things up incorrectly.
your /etc/rc.conf should have lines similar to these:
gateway_enable="YES"
hostname="JOBOB"
ifconfig dc0 1.1.4.1 netmask 255.255.255.0
ifconfig_ed0="DHCP"
ipf -Fa -f /etc/ipf.conf
ipnat -f /etc/ipnat.conf
ipmon -D /var/log/security
kern_securelevel_enable="NO"
nfs_reserved_port_only="NO"
and you should have an /etc/resolv.conf
search evrocom.net
nameserver 212.39.92.2
also, your /etc/dhclient.conf should not have anything in it, usually
nothing is needed.
also, if you want to set up IPNAT'ing you need to configure that in your
kernel config.
also, it is highly possible that the card you have set up for internal usage
was not picked up your installation. that also needs to be enabled in the
kernel.
ask and you shall receive.
--charlie pelletier
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?028701c1e4c1$ce03c860$32040101>
