Date: Sat, 2 Sep 2006 19:21:54 +0200 From: =?iso-8859-2?Q?Daniel_Dvo=F8=E1k?= <dandee@hellteam.net> To: "'Sam Leffler'" <sam@errno.com> Cc: freebsd-stable@freebsd.org Subject: RE: atheros driver: countrycode and athdebug Message-ID: <000001c6ceb4$4a33c620$6508280a@tocnet28.jspoj.czf> In-Reply-To: <44F9039C.7060001@errno.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> You can override the country code but the potential values=20 > depends on the regdomain. I thought hw.ath.countrycode was=20 > r/w but it appears you can only set via the tunable api (kenv=20 > hw.ath.countrycode=3DXXX). The dev.ath mib must be r/o since=20 > you cannot (yet) change this after attaching the device (the=20 > driver does not implement it). Adding support to do this is=20 > not a big deal but hasn't been done; feel free to supply a patch. >=20 Ok, I tried to set via the tunable api kenv through loader, but this is = the result: # ifconfig ath0 ifconfig: interface ath0 does not exist # ifconfig ath1 ifconfig: interface ath1 does not exist ath0: <Atheros 5212> mem 0x80000000-0x8000ffff irq 12 at device 13.0 on = pci0 ath0: unable to collect channel list from hal; regdomain likely 96 = country code 203 device_attach: ath0 attach returned 22 ath1: <Atheros 5212> mem 0x800c0000-0x800cffff irq 9 at device 17.0 on = pci0 ath1: unable to collect channel list from hal; regdomain likely 96 = country code 203 device_attach: ath1 attach returned 22 ath0: <Atheros 5212> mem 0x80000000-0x8000ffff irq 12 at device 13.0 on = pci0 ath0: unable to collect channel list from hal; regdomain likely 96 = country code 203 device_attach: ath0 attach returned 22 ath1: <Atheros 5212> mem 0x800c0000-0x800cffff irq 9 at device 17.0 on = pci0 ath1: unable to collect channel list from hal; regdomain likely 96 = country code 203 device_attach: ath1 attach returned 22 # sysctl hw.ath hw.ath.hal.version: 0.9.17.2 hw.ath.hal.dma_brt: 2 hw.ath.hal.sw_brt: 10 hw.ath.hal.swba_backoff: 0 hw.ath.dwell: 200 hw.ath.calibrate: 30 hw.ath.outdoor: 1 hw.ath.xchanmode: 1 hw.ath.countrycode: 203 hw.ath.regdomain: 0 -- not setted to 96 ???? hw.ath.rxbuf: 40 hw.ath.txbuf: 100 So ? I don=B4t know. :)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001c6ceb4$4a33c620$6508280a>