Date: Wed, 12 Aug 2015 09:31:14 +0000 (GMT) From: Anders Bolt-Evensen <andersbo87@icloud.com> To: freebsd-usb@freebsd.org Subject: Re: Touchpad/trackpad not working Message-ID: <08090d18-0301-4f60-b898-647e3d09bd46@me.com> In-Reply-To: <55CAFC85.2030806@selasky.org>
index | next in thread | previous in thread | raw e-mail
On Aug 12, 2015, at 09:56 AM, Hans Petter Selasky <hps@selasky.org> wrote: > On 08/12/15 09:28, Anders Bolt-Evensen wrote: >> >> >> On Aug 11, 2015, at 05:03 PM, Hans Petter Selasky <hps@selasky.org> wrote: >> >>> On 08/11/15 16:40, Anthony Jenkins via freebsd-usb wrote: >>>> >>>> hid_is_mouse() is failing to tell that your Synaptics USB HID device is >>>> a mouse, but /only/ when there's no other USB (HID) device on that USB >>>> bus (usbus0). I suspect it has to do with the hid_get_item() warnings >>>> about chopping stuff off. I can't tell from the source code for >>>> hid_get_item() (a 313-line function) why it's behaving that way, or why >>>> a totally different HID device (Logitech mouse) causes it to behave >>>> differently for this HID device (Synaptics touchpad). I've added >>>> freebsd-usb@ to see if they know what's going on. >>>> >>>> ajenkins@kubuntu-ajenkins:~/Downloads$ grep usbus0 >>>> dmesg_with_external_usb.txt >>>> usbus0: waiting for BIOS to give up control >>>> usbus0 on xhci0 >>>> random: harvesting attach, 8 bytes (4 bits) from usbus0 >>>> usbus0: 5.0Gbps Super Speed USB v3.0 >>>> ugen0.1: <0x8086> at usbus0 >>>> uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on >>>> usbus0 >>>> Root mount waiting for: usbus2 usbus1 usbus0 >>>> ugen0.2: <Logitech> at usbus0 >>>> ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1> on >>>> usbus0 >>>> Root mount waiting for: usbus0 >>>> ugen0.3: <Generic> at usbus0 >>>> Root mount waiting for: usbus0 >>>> ugen0.4: <vendor 0x06cb> at usbus0 >>>> ugen0.5: <Chicony Electronics Co.,Ltd.> at usbus0 >>>> Root mount waiting for: usbus0 >>>> Root mount waiting for: usbus0 >>>> [snip] >>>> Root mount waiting for: usbus0 >>>> Root mount waiting for: usbus0 >>>> ugen0.6: <Unknown> at usbus0 (disconnected) >>>> ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1> on >>>> usbus0 >>>> ums1: <vendor 0x06cb product 0x2970, class 0/0, rev 2.00/0.08, addr >>>> 3> on usbus0 >>>> uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1> on >>>> usbus0 >>>> >>>> What possessed the laptop manufacturer to hang the Synaptics touchpad >>>> device off a USB 3.0 controller is beyond me... I have problems booting >>>> FreeBSD off USB 3.0 mass storage devices. >>>> >>> >>> Hi, >>> >>> Does your mouse only fail to work in X-org, or also the console? >>> >>> Run "usbdump -i usbusX -f Y -s 65536 -vvv" to catch USB events for >>> ugenX.Y. That might give some further clues. >>> >>> If using X.org, do you use hald or devd backend? >>> >>> --HPS >> >> It fails in both X-org and console. >> In X, recently I've only been using devd. >> When trying to use the command usbdump -i usbus0 -f 3 -s 65536 -vvv on >> my touchpad (without any external usb receiver connected), nothing >> happens at all. No left-click, no right-click, nothing. >> However, if I insert an external USB receiver and then reboot the >> computer, the touchpad works just fine in both console and in X-org. >> If I now do the command above, since I've connected the receiver and >> done the reboot, I get the following output (just note that during the >> reboot, the address of the touchpad was changed from ugen0.3 to ugen0.4): >> https://www.dropbox.com/s/ktj757okcq61ljc/usbdump_i_usbusX_f_Y_s_65536_vvv.txt?dl=0 >> >> >> >> On Aug 11, 2015, at 05:46 PM, Zoran Kolic <zkolic@sbb.rs> wrote: >> >>> What do you have in device.hints? >>> >>> Zoran >>> > > When you don't see any activity, can you issue a reset of the touchpad: > > usbconfig -d X.Y reset > > while "usbdump" is running on the same device? > > --HPS Sure. usbconfig -d 0.3 reset results in the following output from the usbdump command: 11:24:32.121246 usbus0.3 SUBM-CTRL-EP=00000000,SPD=FULL,NFR=1,SLEN=8,IVAL=0 frame[0] WRITE 8 bytes 0000 00 09 00 00 00 00 00 00 -- -- -- -- -- -- -- -- |........ | flags 0x10 <PROXY_BUFFER|0> status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.121619 usbus0.3 DONE-CTRL-EP=00000000,SPD=FULL,NFR=1,SLEN=0,IVAL=0,ERR=0 frame[0] WRITE 8 bytes flags 0x10 <PROXY_BUFFER|0> status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.499707 usbus0.3 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 frame[0] WRITE 8 bytes 0000 80 06 00 01 00 00 08 00 -- -- -- -- -- -- -- -- |........ | frame[1] READ 8 bytes flags 0x10 <PROXY_BUFFER|0> status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.501363 usbus0.3 DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0,ERR=0 frame[0] WRITE 8 bytes frame[1] READ 8 bytes 0000 12 01 00 02 00 00 00 08 -- -- -- -- -- -- -- -- |........ | flags 0x10 <PROXY_BUFFER|0> status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.501467 usbus0.3 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 frame[0] WRITE 8 bytes 0000 80 06 00 01 00 00 12 00 -- -- -- -- -- -- -- -- |........ | frame[1] READ 18 bytes flags 0x10 <PROXY_BUFFER|0> status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.502123 usbus0.3 DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=20,IVAL=0,ERR=0 frame[0] WRITE 8 bytes frame[1] READ 18 bytes 0000 12 01 00 02 00 00 00 08 CB 06 70 29 08 00 01 02 |..........p)....| 0010 00 01 -- -- -- -- -- -- -- -- -- -- -- -- -- -- |.. | flags 0x10 <PROXY_BUFFER|0> status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.502231 usbus0.3 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 frame[0] WRITE 8 bytes 0000 80 06 00 02 00 00 09 00 -- -- -- -- -- -- -- -- |........ | frame[1] READ 9 bytes flags 0x10 <PROXY_BUFFER|0> status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.502630 usbus0.3 DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=12,IVAL=0,ERR=0 frame[0] WRITE 8 bytes frame[1] READ 9 bytes 0000 09 02 29 00 01 01 00 A0 32 -- -- -- -- -- -- -- |..).....2 | flags 0x10 <PROXY_BUFFER|0> status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.502735 usbus0.3 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 frame[0] WRITE 8 bytes 0000 80 06 00 02 00 00 29 00 -- -- -- -- -- -- -- -- |......). | frame[1] READ 41 bytes flags 0x10 <PROXY_BUFFER|0> status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.503373 usbus0.3 DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=44,IVAL=0,ERR=0 frame[0] WRITE 8 bytes frame[1] READ 41 bytes 0000 09 02 29 00 01 01 00 A0 32 09 04 00 00 02 03 00 |..).....2.......| 0010 00 00 09 21 11 01 00 01 22 A1 01 07 05 81 03 40 |...!...."......@| 0020 00 01 07 05 02 03 40 00 0A -- -- -- -- -- -- -- |......@.. | flags 0x10 <PROXY_BUFFER|0> status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.503618 usbus0.3 SUBM-CTRL-EP=00000000,SPD=FULL,NFR=1,SLEN=8,IVAL=0 frame[0] WRITE 8 bytes 0000 00 09 01 00 00 00 00 00 -- -- -- -- -- -- -- -- |........ | flags 0x10 <PROXY_BUFFER|0> status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.604460 usbus0.3 DONE-CTRL-EP=00000000,SPD=FULL,NFR=1,SLEN=0,IVAL=0,ERR=0 frame[0] WRITE 8 bytes flags 0x10 <PROXY_BUFFER|0> status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.604968 usbus0.3 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 frame[0] WRITE 8 bytes 0000 81 06 00 22 00 00 A1 01 -- -- -- -- -- -- -- -- |...".... | frame[1] READ 417 bytes flags 0x10 <PROXY_BUFFER|0> status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.627494 usbus0.3 DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=420,IVAL=0,ERR=0 frame[0] WRITE 8 bytes frame[1] READ 417 bytes 0000 05 01 09 02 A1 01 85 02 09 01 A1 00 05 09 19 01 |................| 0010 29 02 15 00 25 01 75 01 95 02 81 02 95 06 81 01 |)...%.u.........| 0020 05 01 09 30 09 31 15 81 25 7F 75 08 95 02 81 06 |...0.1..%.u.....| 0030 C0 C0 05 0D 09 05 A1 01 85 03 09 22 A1 02 15 00 |..........."....| 0040 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 |%..G.B..u.....u.| 0050 25 05 09 51 81 02 75 01 95 03 81 03 05 01 15 00 |%..Q..u.........| 0060 26 D4 04 75 10 55 0E 65 11 09 30 35 00 46 06 04 |&..u.U.e..05.F..| 0070 95 01 81 02 46 EC 02 26 82 03 09 31 81 02 05 0D |....F..&...1....| 0080 C0 55 0C 66 01 10 47 FF FF 00 00 27 FF FF 00 00 |.U.f..G....'....| 0090 75 10 95 01 09 56 81 02 09 54 25 7F 95 01 75 08 |u....V...T%...u.| 00A0 81 02 05 09 09 01 25 01 75 01 95 01 81 02 95 07 |......%.u.......| 00B0 81 03 05 0D 85 08 09 55 09 59 75 04 95 02 25 0F |.......U.Yu...%.| 00C0 B1 02 85 0D 09 60 75 01 95 01 15 00 25 01 B1 02 |.....`u.....%...| 00D0 95 07 B1 03 85 07 06 00 FF 09 C5 15 00 26 FF 00 |.............&..| 00E0 75 08 96 00 01 B1 02 C0 05 0D 09 0E A1 01 85 04 |u...............| 00F0 09 22 A1 02 09 52 15 00 25 0A 75 08 95 01 B1 02 |."...R..%.u.....| 0100 C0 09 22 A1 00 85 06 09 57 09 58 75 01 95 02 25 |..".....W.Xu...%| 0110 01 B1 02 95 06 B1 03 C0 C0 06 00 FF 09 01 A1 01 |................| 0120 85 09 09 02 15 00 26 FF 00 75 08 95 14 91 02 85 |......&..u......| 0130 0A 09 03 15 00 26 FF 00 75 08 95 14 91 02 85 0B |.....&..u.......| 0140 09 04 15 00 26 FF 00 75 08 95 23 81 02 85 0C 09 |....&..u..#.....| 0150 05 15 00 26 FF 00 75 08 95 23 81 02 85 0F 09 06 |...&..u..#......| 0160 15 00 26 FF 00 75 08 95 01 B1 02 85 0E 09 07 15 |..&..u..........| 0170 00 26 FF 00 75 08 95 01 B1 02 C0 06 EE FF 09 01 |.&..u...........| 0180 A1 01 85 EE 09 02 15 00 26 FF 00 75 08 95 04 91 |........&..u....| 0190 02 85 EF 09 02 15 00 26 FF 00 75 08 95 10 B1 02 |.......&..u.....| 01A0 C0 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- |. | flags 0x10 <PROXY_BUFFER|0> status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.627762 usbus0.3 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 frame[0] WRITE 8 bytes 0000 81 06 00 22 00 00 A1 01 -- -- -- -- -- -- -- -- |...".... | frame[1] READ 417 bytes flags 0x10 <PROXY_BUFFER|0> status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.650229 usbus0.3 DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=420,IVAL=0,ERR=0 frame[0] WRITE 8 bytes frame[1] READ 417 bytes 0000 05 01 09 02 A1 01 85 02 09 01 A1 00 05 09 19 01 |................| 0010 29 02 15 00 25 01 75 01 95 02 81 02 95 06 81 01 |)...%.u.........| 0020 05 01 09 30 09 31 15 81 25 7F 75 08 95 02 81 06 |...0.1..%.u.....| 0030 C0 C0 05 0D 09 05 A1 01 85 03 09 22 A1 02 15 00 |..........."....| 0040 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 |%..G.B..u.....u.| 0050 25 05 09 51 81 02 75 01 95 03 81 03 05 01 15 00 |%..Q..u.........| 0060 26 D4 04 75 10 55 0E 65 11 09 30 35 00 46 06 04 |&..u.U.e..05.F..| 0070 95 01 81 02 46 EC 02 26 82 03 09 31 81 02 05 0D |....F..&...1....| 0080 C0 55 0C 66 01 10 47 FF FF 00 00 27 FF FF 00 00 |.U.f..G....'....| 0090 75 10 95 01 09 56 81 02 09 54 25 7F 95 01 75 08 |u....V...T%...u.| 00A0 81 02 05 09 09 01 25 01 75 01 95 01 81 02 95 07 |......%.u.......| 00B0 81 03 05 0D 85 08 09 55 09 59 75 04 95 02 25 0F |.......U.Yu...%.| 00C0 B1 02 85 0D 09 60 75 01 95 01 15 00 25 01 B1 02 |.....`u.....%...| 00D0 95 07 B1 03 85 07 06 00 FF 09 C5 15 00 26 FF 00 |.............&..| 00E0 75 08 96 00 01 B1 02 C0 05 0D 09 0E A1 01 85 04 |u...............| 00F0 09 22 A1 02 09 52 15 00 25 0A 75 08 95 01 B1 02 |."...R..%.u.....| 0100 C0 09 22 A1 00 85 06 09 57 09 58 75 01 95 02 25 |..".....W.Xu...%| 0110 01 B1 02 95 06 B1 03 C0 C0 06 00 FF 09 01 A1 01 |................| 0120 85 09 09 02 15 00 26 FF 00 75 08 95 14 91 02 85 |......&..u......| 0130 0A 09 03 15 00 26 FF 00 75 08 95 14 91 02 85 0B |.....&..u.......| 0140 09 04 15 00 26 FF 00 75 08 95 23 81 02 85 0C 09 |....&..u..#.....| 0150 05 15 00 26 FF 00 75 08 95 23 81 02 85 0F 09 06 |...&..u..#......| 0160 15 00 26 FF 00 75 08 95 01 B1 02 85 0E 09 07 15 |..&..u..........| 0170 00 26 FF 00 75 08 95 01 B1 02 C0 06 EE FF 09 01 |.&..u...........| 0180 A1 01 85 EE 09 02 15 00 26 FF 00 75 08 95 04 91 |........&..u....| 0190 02 85 EF 09 02 15 00 26 FF 00 75 08 95 10 B1 02 |.......&..u.....| 01A0 C0 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- |. | flags 0x10 <PROXY_BUFFER|0> status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.650336 usbus0.3 SUBM-CTRL-EP=00000000,SPD=FULL,NFR=1,SLEN=8,IVAL=0 frame[0] WRITE 8 bytes 0000 21 0A 00 00 00 00 00 00 -- -- -- -- -- -- -- -- |!....... | flags 0x10 <PROXY_BUFFER|0> status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 11:24:32.652030 usbus0.3 DONE-CTRL-EP=00000000,SPD=FULL,NFR=1,SLEN=0,IVAL=0,ERR=STALLED frame[0] WRITE 8 bytes flags 0x10 <PROXY_BUFFER|0> status 0x8a1a5 <OPEN|DID_DMA_DELAY|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|DOING_CALLBACK|0>help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?08090d18-0301-4f60-b898-647e3d09bd46>