Date: Wed, 16 May 2001 16:41:30 -0500 (CDT) From: Scott C Klement <scotty@klement.dstorm.net> To: <stable@freebsd.org> Subject: Cyclades 16yep/PCI on 4.3-R? Message-ID: <Pine.BSF.4.32.0105161640210.6924-200000@nixie.ods.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
I hope this is the right list for this -- if not, please be gentle in
suggesting a correct, or alternative forum...
I've got a Dell Optiplex GX100 (minitower) running FreeBSD 4.3-RELEASE.
When I attach my Cyclades Cyclom-16yep (PCI) to the machine, it hangs
during boot -- I can't even get into single-user mode.
Here's a few things I've tried:
1) I've both enabled and disabled the line "options CY_PCI_FASTINTR" in
my kernel config. Changing this causes it to hang in a different
place, but either way it doesn't boot. :(
2) I've tried many different settings for IRQs in the BIOS. I've
succeeded in making it the only device on a given IRQ, but this
doesn't seem to help...
3) The BIOS does not have a setting for "Plug and PLay OS", so I can't
experiment with that.
4) Simply unplugging the cable from the cyclades card allows the boot
to succeed -- but then I get the message "cy0: no ports found!",
making the Cyclades board unusable :(
5) Tried the same Cyclades product in another, identical, PC. Made no
difference -- same problem. Tried it in yet another PC, this one
with a completely different mainboard, CPU, etc, and had no problems.
6) Tried running RedHat on the PC that I was having problems with --
and the the cyclades box/card works fine with that OS.
(But! I want FreeBSD!)
7) Going back to FreeBSD on the machine that's giving me grief, if I
hit Ctrl-Alt-Del after the system is "hung", it will shut down
normally and reboot.
I've attached the boot messages (I set up a serial console so I could
capture them) in case this might provide any insight. Please let me know
if there's any other information I could provide...
TIA for any help provided!
[-- Attachment #2 --]
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 640kB/14336kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(jkh@narf.osd.bsdi.com, Sat Apr 21 08:46:19 GMT 2001)
Loading /boot/defaults/loader.conf
/kernel text=0x18b17f data=0x41b9c+0x1c5bc syms=[0x4+0x29720+0x4+0x2e0b7]
\
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel]...
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
BIOS 640kB/14336kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(jkh@narf.osd.bsdi.com, Sat Apr 21 08:46:19 GMT 2001)
Loading /boot/defaults/loader.conf
/kernel text=0x18b17f data=0x41b9c+0x1c5bc syms=[0x4+0x29720+0x4+0x2e0b7]
\
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel]...
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #3: Tue May 15 14:18:03 CDT 2001
klemscot@bcserv4.klements.com:/usr/src/sys/compile/BCSERV
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (595.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 132833280 (129720K bytes)
config> di ed0
config> q
avail memory = 125005824 (122076K bytes)
Preloaded elf kernel "kernel" at 0xc0343000.
FreeBSD 4.3-RELEASE #3: Tue May 15 14:18:03 CDT 2001
klemscot@bcserv4.klements.com:/usr/src/sys/compile/BCSERV
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (595.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 132833280 (129720K bytes)
config> di ed0
config> q
avail memory = 125005824 (122076K bytes)
Preloaded elf kernel "kernel" at 0xc0343000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc034309c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810-DC100 (i810-DC100 GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel 82810-DC100 (i810-DC100 GMCH) SVGA controller> at 1.0 irq 9
pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
cy0: <Cyclades Cyclom-Y Serial Adapter> port 0xec80-0xecff mem 0xfdff8000-0xfdffbfff,0xfdfffc00-0xfdfffc7f irq 10 at device 9.0 on pci1
Preloaded userconfig_script "/boot/kernel.conf" at 0xc034309c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810-DC100 (i810-DC100 GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel 82810-DC100 (i810-DC100 GMCH) SVGA controller> at 1.0 irq 9
pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
cy0: <Cyclades Cyclom-Y Serial Adapter> port 0xec80-0xecff mem 0xfdff8000-0xfdffbfff,0xfdfffc00-0xfdfffc7f irq 10 at device 9.0 on pci1
cy0: driver is using old-style compatibility shims
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82801AA (ICH) USB controller> at 31.2 irq 7
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.32.0105161640210.6924-200000>