Date: Sun, 06 Mar 2016 12:08:25 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-amd64@FreeBSD.org Subject: [Bug 207445] net80211 Atheros AR938x: non-working WiFi hostap since ~ January Message-ID: <bug-207445-6-l5TkfTsR6O@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-207445-6@https.bugs.freebsd.org/bugzilla/> References: <bug-207445-6@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D207445 --- Comment #15 from ohartman@zedat.fu-berlin.de --- @Adrian Chadd: My Laptop is a customised CURRENT (custimised kernel), but i= t is a simple "client" to the server providing WiFi access via hostapd and the mentions Atheros-based WiFi boadr (PCIe card, three antennas). I think the setup of the laptop is irrelevant, since I have the strange behaviour also = with other, older laptops I used around here and, as an extra, a smartphone (Motorola Moto G) which WiFi also reject to work. The association to the AP is on all devices successful: they obtain an IP f= rom the isc-dhcpd residing on the AP-hosting server. But then no traffic is possible anymore. I disabled the ipwf on all sides if possible. It is even = not possible to ping the address of the AP from any station. This is the AP's kernel config portion for WLAN: # WLAN # Wireless NIC cards device wlan # 802.11 support options IEEE80211_DEBUG # enable debug msgs options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's options IEEE80211_SUPPORT_MESH # enable 802.11s draft support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm device wlan_xauth # AMRR transmit rate control algorithm # device ath # Atheros NICs device ath_pci # Atheros pci/cardbus glue device ath_hal # pci/cardbus chip support #device ath_acl # MAC access list support (can not be built into kernel!) options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors options AH_AR5416_INTERRUPT_MITIGATION # AR5416 interrupt mitigati= on options ATH_ENABLE_11N # Enable 802.11n support for AR5416 and lat= er # device ath_rate_sample # SampleRate tx rate control for ath 802.11n seems not to work on FreeBSD, although the used WiFi AP card support ist as well as the Intel WiFi chipset 7260 (if_iwm). I compiled /usr/src/tools/tools/ath and installed as requested. Put the AP's WiFi into debug mode via: [~] wlandebug -i wlan0 auth+assoc+state net.wlan.0.debug: 0xc80000<assoc,auth,state> [~] killall -HUP hostapd [~] athstats 1 input output altrate short long xretry crcerr crypt phyerr rssi= =20 rate athstats: ath_driver_req_fetch_stats: ioctl: Device not configured Something is missing. How can I deinstall /usr/src/tools/tools/ath? A make deinstall doesn't work. --=20 You are receiving this mail because: You are on the CC list for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-207445-6-l5TkfTsR6O>