Date: Tue, 28 May 2013 20:53:26 +0000 (UTC) From: Marius Strobl <marius@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-9@freebsd.org Subject: svn commit: r251068 - stable/9/sys/dev/bge Message-ID: <201305282053.r4SKrQCx040093@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: marius Date: Tue May 28 20:53:26 2013 New Revision: 251068 URL: http://svnweb.freebsd.org/changeset/base/251068 Log: MFC: r245926, r245931 - Improve some comments. - Make bge_lookup_{rev,vendor}() static. - Factor out chip identification rather than duplicating the code. - Sanitize bge_probe() a bit (don't hardcode buffer sizes, allow bge_lookup_vendor() to return NULL so the excessive panic() can be removed there, etc.) and return BUS_PROBE_DEFAULT rather than hardcoding 0. - According to the Linux tg3 driver, BCM57791 and BCM57795 aren't capable of Gigabit Ethernet. - Check the return value of taskqueue_start_threads(). - Mention NetLink controllers in the fallback description, too. Modified: stable/9/sys/dev/bge/if_bge.c Directory Properties: stable/9/sys/ (props changed) stable/9/sys/dev/ (props changed) Modified: stable/9/sys/dev/bge/if_bge.c ============================================================================== --- stable/9/sys/dev/bge/if_bge.c Tue May 28 20:37:48 2013 (r251067) +++ stable/9/sys/dev/bge/if_bge.c Tue May 28 20:53:26 2013 (r251068) @@ -35,10 +35,10 @@ __FBSDID("$FreeBSD$"); /* - * Broadcom BCM570x family gigabit ethernet driver for FreeBSD. + * Broadcom BCM57xx(x)/BCM590x NetXtreme and NetLink family Ethernet driver * * The Broadcom BCM5700 is based on technology originally developed by - * Alteon Networks as part of the Tigon I and Tigon II gigabit ethernet + * Alteon Networks as part of the Tigon I and Tigon II Gigabit Ethernet * MAC chips. The BCM5700, sometimes referred to as the Tigon III, has * two on-board MIPS R4000 CPUs and can have as much as 16MB of external * SSRAM. The BCM5700 supports TCP, UDP and IP checksum offload, jumbo @@ -367,8 +367,9 @@ static const struct bge_revision bge_maj #define BGE_IS_5717_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_5717_PLUS) #define BGE_IS_57765_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_57765_PLUS) -const struct bge_revision * bge_lookup_rev(uint32_t); -const struct bge_vendor * bge_lookup_vendor(uint16_t); +static uint32_t bge_chipid(device_t); +static const struct bge_vendor * bge_lookup_vendor(uint16_t); +static const struct bge_revision * bge_lookup_rev(uint32_t); typedef int (*bge_eaddr_fcn_t)(struct bge_softc *, uint8_t[]); @@ -1916,7 +1917,7 @@ bge_chipinit(struct bge_softc *sc) PCI_CLRBIT(sc->bge_dev, BGE_PCI_CMD, PCIM_CMD_INTxDIS | PCIM_CMD_MWIEN, 4); - /* Set the timer prescaler (always 66Mhz) */ + /* Set the timer prescaler (always 66 MHz). */ CSR_WRITE_4(sc, BGE_MISC_CFG, BGE_32BITTIME_66MHZ); /* XXX: The Linux tg3 driver does this at the start of brgphy_reset. */ @@ -2586,7 +2587,7 @@ bge_blockinit(struct bge_softc *sc) return (0); } -const struct bge_revision * +static const struct bge_revision * bge_lookup_rev(uint32_t chipid) { const struct bge_revision *br; @@ -2604,7 +2605,7 @@ bge_lookup_rev(uint32_t chipid) return (NULL); } -const struct bge_vendor * +static const struct bge_vendor * bge_lookup_vendor(uint16_t vid) { const struct bge_vendor *v; @@ -2613,10 +2614,47 @@ bge_lookup_vendor(uint16_t vid) if (v->v_id == vid) return (v); - panic("%s: unknown vendor %d", __func__, vid); return (NULL); } +static uint32_t +bge_chipid(device_t dev) +{ + uint32_t id; + + id = pci_read_config(dev, BGE_PCI_MISC_CTL, 4) >> + BGE_PCIMISCCTL_ASICREV_SHIFT; + if (BGE_ASICREV(id) == BGE_ASICREV_USE_PRODID_REG) { + /* + * Find the ASCI revision. Different chips use different + * registers. + */ + switch (pci_get_device(dev)) { + case BCOM_DEVICEID_BCM5717: + case BCOM_DEVICEID_BCM5718: + case BCOM_DEVICEID_BCM5719: + case BCOM_DEVICEID_BCM5720: + id = pci_read_config(dev, + BGE_PCI_GEN2_PRODID_ASICREV, 4); + break; + case BCOM_DEVICEID_BCM57761: + case BCOM_DEVICEID_BCM57762: + case BCOM_DEVICEID_BCM57765: + case BCOM_DEVICEID_BCM57766: + case BCOM_DEVICEID_BCM57781: + case BCOM_DEVICEID_BCM57785: + case BCOM_DEVICEID_BCM57791: + case BCOM_DEVICEID_BCM57795: + id = pci_read_config(dev, + BGE_PCI_GEN15_PRODID_ASICREV, 4); + break; + default: + id = pci_read_config(dev, BGE_PCI_PRODID_ASICREV, 4); + } + } + return (id); +} + /* * Probe for a Broadcom chip. Check the PCI vendor and device IDs * against our list and return its name if we find a match. @@ -2634,61 +2672,34 @@ bge_probe(device_t dev) char model[64]; const struct bge_revision *br; const char *pname; - struct bge_softc *sc = device_get_softc(dev); + struct bge_softc *sc; const struct bge_type *t = bge_devs; const struct bge_vendor *v; uint32_t id; uint16_t did, vid; + sc = device_get_softc(dev); sc->bge_dev = dev; vid = pci_get_vendor(dev); did = pci_get_device(dev); while(t->bge_vid != 0) { if ((vid == t->bge_vid) && (did == t->bge_did)) { - id = pci_read_config(dev, BGE_PCI_MISC_CTL, 4) >> - BGE_PCIMISCCTL_ASICREV_SHIFT; - if (BGE_ASICREV(id) == BGE_ASICREV_USE_PRODID_REG) { - /* - * Find the ASCI revision. Different chips - * use different registers. - */ - switch (pci_get_device(dev)) { - case BCOM_DEVICEID_BCM5717: - case BCOM_DEVICEID_BCM5718: - case BCOM_DEVICEID_BCM5719: - case BCOM_DEVICEID_BCM5720: - id = pci_read_config(dev, - BGE_PCI_GEN2_PRODID_ASICREV, 4); - break; - case BCOM_DEVICEID_BCM57761: - case BCOM_DEVICEID_BCM57762: - case BCOM_DEVICEID_BCM57765: - case BCOM_DEVICEID_BCM57766: - case BCOM_DEVICEID_BCM57781: - case BCOM_DEVICEID_BCM57785: - case BCOM_DEVICEID_BCM57791: - case BCOM_DEVICEID_BCM57795: - id = pci_read_config(dev, - BGE_PCI_GEN15_PRODID_ASICREV, 4); - break; - default: - id = pci_read_config(dev, - BGE_PCI_PRODID_ASICREV, 4); - } - } + id = bge_chipid(dev); br = bge_lookup_rev(id); - v = bge_lookup_vendor(vid); if (bge_has_eaddr(sc) && pci_get_vpd_ident(dev, &pname) == 0) - snprintf(model, 64, "%s", pname); - else - snprintf(model, 64, "%s %s", v->v_name, + snprintf(model, sizeof(model), "%s", pname); + else { + v = bge_lookup_vendor(vid); + snprintf(model, sizeof(model), "%s %s", + v != NULL ? v->v_name : "Unknown", br != NULL ? br->br_name : - "NetXtreme Ethernet Controller"); - snprintf(buf, 96, "%s, %sASIC rev. %#08x", model, - br != NULL ? "" : "unknown ", id); + "NetXtreme/NetLink Ethernet Controller"); + } + snprintf(buf, sizeof(buf), "%s, %sASIC rev. %#08x", + model, br != NULL ? "" : "unknown ", id); device_set_desc_copy(dev, buf); - return (0); + return (BUS_PROBE_DEFAULT); } t++; } @@ -3272,38 +3283,7 @@ bge_attach(device_t dev) /* Save various chip information. */ sc->bge_func_addr = pci_get_function(dev); - sc->bge_chipid = - pci_read_config(dev, BGE_PCI_MISC_CTL, 4) >> - BGE_PCIMISCCTL_ASICREV_SHIFT; - if (BGE_ASICREV(sc->bge_chipid) == BGE_ASICREV_USE_PRODID_REG) { - /* - * Find the ASCI revision. Different chips use different - * registers. - */ - switch (pci_get_device(dev)) { - case BCOM_DEVICEID_BCM5717: - case BCOM_DEVICEID_BCM5718: - case BCOM_DEVICEID_BCM5719: - case BCOM_DEVICEID_BCM5720: - sc->bge_chipid = pci_read_config(dev, - BGE_PCI_GEN2_PRODID_ASICREV, 4); - break; - case BCOM_DEVICEID_BCM57761: - case BCOM_DEVICEID_BCM57762: - case BCOM_DEVICEID_BCM57765: - case BCOM_DEVICEID_BCM57766: - case BCOM_DEVICEID_BCM57781: - case BCOM_DEVICEID_BCM57785: - case BCOM_DEVICEID_BCM57791: - case BCOM_DEVICEID_BCM57795: - sc->bge_chipid = pci_read_config(dev, - BGE_PCI_GEN15_PRODID_ASICREV, 4); - break; - default: - sc->bge_chipid = pci_read_config(dev, - BGE_PCI_PRODID_ASICREV, 4); - } - } + sc->bge_chipid = bge_chipid(dev); sc->bge_asicrev = BGE_ASICREV(sc->bge_chipid); sc->bge_chiprev = BGE_CHIPREV(sc->bge_chipid); @@ -3493,6 +3473,8 @@ bge_attach(device_t dev) pci_get_device(dev) == BCOM_DEVICEID_BCM5753F || pci_get_device(dev) == BCOM_DEVICEID_BCM5787F)) || pci_get_device(dev) == BCOM_DEVICEID_BCM57790 || + pci_get_device(dev) == BCOM_DEVICEID_BCM57791 || + pci_get_device(dev) == BCOM_DEVICEID_BCM57795 || sc->bge_asicrev == BGE_ASICREV_BCM5906) { /* These chips are 10/100 only. */ capmask &= ~BMSR_EXTSTAT; @@ -3504,8 +3486,8 @@ bge_attach(device_t dev) * TSO. But the firmware is not available to FreeBSD and Linux * claims that the TSO performed by the firmware is slower than * hardware based TSO. Moreover the firmware based TSO has one - * known bug which can't handle TSO if ethernet header + IP/TCP - * header is greater than 80 bytes. The workaround for the TSO + * known bug which can't handle TSO if Ethernet header + IP/TCP + * header is greater than 80 bytes. A workaround for the TSO * bug exist but it seems it's too expensive than not using * TSO at all. Some hardwares also have the TSO bug so limit * the TSO to the controllers that are not affected TSO issues @@ -3878,8 +3860,13 @@ again: error = ENOMEM; goto fail; } - taskqueue_start_threads(&sc->bge_tq, 1, PI_NET, "%s taskq", - device_get_nameunit(sc->bge_dev)); + error = taskqueue_start_threads(&sc->bge_tq, 1, PI_NET, + "%s taskq", device_get_nameunit(sc->bge_dev)); + if (error != 0) { + device_printf(dev, "could not start threads.\n"); + ether_ifdetach(ifp); + goto fail; + } error = bus_setup_intr(dev, sc->bge_irq, INTR_TYPE_NET | INTR_MPSAFE, bge_msi_intr, NULL, sc, &sc->bge_intrhand);
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201305282053.r4SKrQCx040093>