Date: Fri, 18 Sep 2009 13:34:01 -0700 From: Doug Hardie <bc979@lafn.org> To: freebsd-stable Stable <freebsd-stable@freebsd.org> Subject: Problems with 8.0 Beta 4 Message-ID: <4AC7C662-3BEE-4459-AF65-B04D4417503B@lafn.org>
next in thread | raw e-mail | index | archive | help
I have switched to working hardware. Sure makes a difference ;-) Now I am down to a couple issues: 1. When booting I first get the following: F1: FreeBSD F5: Drive 0 F6: PXE Boot: F1 At that point it just sits and starts adding #s at the end of the Boot statement. If I press F5 (none of the other F keys do anything), then I get another Boot: F1 line and its sits for a moment and then boots from the disk. I used the standard install with the FreeBSD Boot Loader. After that the system comes up and runs fine. I am only using it for network testing so haven't placed any great load on it but everything I have tried works fine - until I try and shut it down. Then I get a panic at the very end. It also does not shut off the power. I have a console log of the entire boot/shutdown process. The only user command I entered was shutdown -p now. /boot.config: -Dh Consoles: internal video/keyboard serial port BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS 638kB/64512kB available memory FreeBSD/i386 bootstrap loader, Revision 1.1 (root@almeida.cse.buffalo.edu, Sun Sep 6 03:42:03 UTC 2009) Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x8b2774 data=0xde874+0x1feb04 syms= [0x4+0x9c300+0 x4+0xd55bb] | ZDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD? 3 3 3 3 ______ 3 3 | ____| __ ___ ___ 3 Welcome to FreeBSD! 3 | |__ | '__/ _ \/ _ \ 3 3 | __|| | | __/ __/ 3 3 | | | | | | | 3 1. Boot FreeBSD [default] 3 |_| |_| \___|\___| 3 2. Boot FreeBSD with ACPI enabled 3 ____ _____ _____ 3 3. Boot FreeBSD in Safe Mode 3 | _ \ / ____| __ \ 3 4. Boot FreeBSD in single user mode 3 | |_) | (___ | | | | 3 5. Boot FreeBSD with verbose logging 3 | _ < \___ \| | | | 3 6. Escape to loader prompt 3 | |_) |____) | |__| | 3 7. Reboot 3 | | | | 3 3 |____/|_____/|_____/ 3 3 3 3 3 3 3 Select option, [Enter] for default 3 3 or [Space] to pause timer 7 3 @DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDY GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-BETA4 #0: Sun Sep 6 05:51:03 UTC 2009 root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (233.29-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x634 Stepping = 4 Features =0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMO V,MMX> real memory = 67108864 (64 MB) avail memory = 46567424 (44 MB) kbd1 at kbdmux0 ACPI Error: A valid RSDP was not found 20090521 tbxfroot-309 ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. pcib0: <Intel 82443LX (440 LX) host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82443LX (440 LX) host to PCI bridge> on hostb0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 $PIR: ROUTE_INTERRUPT failed. vgapci0: <VGA-compatible display> mem 0xfedc0000-0xfeddffff, 0xfd800000-0xfd ffffff,0xfe000000-0xfe7fffff irq 9 at device 0.0 on pci1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177 ,0x376,0xfcf0-0xfcff at device 7.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfcc0-0xfcdf irq 11 at device 7.2 on pci0 uhci0: [ITHREAD] usbus0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 piix0: <PIIX Timecounter> port 0x7000-0x700f at device 7.3 on pci0 Timecounter "PIIX" frequency 3579545 Hz quality 0 xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xfc40-0xfc7f irq 10 at device 13.0 on pci0 miibus0: <MII bus> on xl0 nsphy0: <DP83840 10/100 media interface> PHY 24 on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:10:4b:2c:bb:09 xl0: [ITHREAD] cpu0 on motherboard pmtimer0 on isa0 unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0c02> can't assign resources (memory) unknown: <System Memory> can't assign resources (memory) atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP030 3 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP 0501 on isa0 uart0: [FILTER] uart0: console (9600,n,8,1) fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 pn pid PNP0700 on isa0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Standard parallel printer port> at port 0x378-0x37f irq 7 pnpid PNP0 400 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc6fff,0xe4000-0xeffff pnpid ORM0 000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0c02> can't assign resources (memory) unknown: <System Memory> can't assign resources (memory) Timecounter "TSC" frequency 233289523 Hz quality 800 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 ad0: 2014MB <WDC AC12100L 09.09M08> at ata0-master UDMA33 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 acd0: CDROM <TOSHIBA CD-ROM XM-6202B/1110> at ata1-master PIO4 WARNING: WITNESS option enabled, expect reduced performance. uhub0: 2 ports with 2 removable, self powered GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s). Trying to mount root from ufs:/dev/ad0s1a Entropy harvesting: interrupts ethernet point_to_point kickstart. /dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1a: clean, 165348 free (3260 frags, 20261 blocks, 1.3% fragmentati on) /dev/ad0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1d: clean, 487494 free (5150 frags, 60293 blocks, 0.7% fragmentati on) /etc/rc: WARNING: $hostname is not set -- see rc.conf(5). Starting Network: lo0. xl0: link state changed to DOWN Configuring syscons: blanktime. Fri Sep 18 13:38:17 PDT 2009 Sep 18 13:38:53 su: doug to root on /dev/ttyv0 Sep 18 13:39:10 shutdown: power-down by doug: Stopping cron. Stopping sshd. Stopping devd. Writing entropy file:. Terminated . Sep 18 13:39:20 syslogd: exiting on signal 15 Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 done All buffers synced. lock order reversal: 1st 0xc1eac8b8 ufs (ufs) @ /usr/src/sys/kern/vfs_mount.c:1200 2nd 0xc1fdfce8 devfs (devfs) @ /usr/src/sys/ufs/ffs/ffs_vfsops.c:1194 KDB: stack backtrace: db_trace_self_wrapper (c0c74987,c1bd399c,c08c0f75,c08b1cfb,c0c7785a,...) at db_trace_self_wrapper+0x26 kdb_backtrace(c08b1cfb,c0c7785a,c1d2e938,c1d2e868,c1bd39f8,...) at kdb_back trace+0x29 _witness_debugger(c0c7785a,c1fdfce8,c0c667ac,c1d2e868,c0c97ee0,...) at _wit ness_debugger+0x25 witness_checkorder(c1fdfce8,9,c0c97ee0,4aa,c1fdfd04,...) at witness_checkor der+0x839 __lockmgr_args(c1fdfce8,80400,c1fdfd04,0,0,...) at __lockmgr_args+0x7a7 vop_stdlock(c1bd3b00,556,c1bd3af8,80400,c1fdfc90,...) at vop_stdlock +0x62 VOP_LOCK1_APV(c0d535c0,c1bd3b00,c2020860,c0d90c80,c1fdfc90,...) at VOP_LOCK 1_APV+0xb5 _vn_lock(c1fdfc90,80400,c0c97ee0,4aa,c1fd2400,...) at _vn_lock+0x5e ffs_flushfiles(c1f84a10,2,c1d6fd80,556,3,...) at ffs_flushfiles+0xa7 softdep_flushfiles(c1f84a10,2,c1d6fd80,c0c7eaec,8aa,...) at softdep_flushfi les+0x2e ffs_unmount(c1f84a10,80000,c1bd3bf4,4f5,c1bd3c00,...) at ffs_unmount +0x149 dounmount(c1f84a10,80000,c1d6fd80,c341fc50,0,...) at dounmount+0x46d vfs_unmountall(c0c7e7c4,0,c0c715f2,129,0,...) at vfs_unmountall+0x4e boot(c0dc4f70,0,c0c715f2,ac,bfbfe9c0,...) at boot+0x44f reboot(c1d6fd80,c1bd3cf8,4,c0c78ac5,c0d56f04,...) at reboot+0x69 syscall(c1bd3d38) at syscall+0x2a3 Xint0x80_syscall() at Xint0x80_syscall+0x20 --- syscall (55, FreeBSD ELF32, reboot), eip = 0x8050f83, esp = 0xbfbfe88c, ebp = 0xbfbfe968 --- Uptime: 1m45s The operating system has halted. Please press any key to reboot.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4AC7C662-3BEE-4459-AF65-B04D4417503B>