Date: Mon, 24 Nov 2008 13:10:48 +0100 From: Greg Byshenk <gbyshenk@byshenk.net> To: Rink Springer <rink@FreeBSD.org> Cc: freebsd-stable@FreeBSD.org Subject: Re: Problem with Adaptec 29320LPE Message-ID: <20081124121048.GB4609@core.byshenk.net> In-Reply-To: <20081124114912.GA28709@rink.nu> References: <20081124114248.GA4609@core.byshenk.net> <20081124114912.GA28709@rink.nu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Nov 24, 2008 at 12:49:12PM +0100, Rink Springer wrote: > Hi Greg, > > On Mon, Nov 24, 2008 at 12:42:49PM +0100, Greg Byshenk wrote: > > backuphost# camcontrol devlist > > <SONY LIB-162 0208> at scbus0 target 0 lun 0 (pass0,ch3) > > <SONY SDX-1100 0102> at scbus0 target 1 lun 0 (sa3,pass1) > > <SONY LIB-162 0203> at scbus0 target 2 lun 0 (pass2,ch4) > > <SONY SDX-900V 0102> at scbus0 target 3 lun 0 (sa4,pass3) > > <AMCC 9650SE-16M DISK 3.06> at scbus1 target 0 lun 0 (da0,pass4) > > <AMCC 9650SE-16M DISK 3.06> at scbus1 target 0 lun 1 (da1,pass5) > Are these volumes perhaps >2TB ? If so, it won't work... we stumbled on > this at work a few weeks ago, and once we resized the volumes so that'd > all be <2TB, the controller worked fine... > > As far as I know, this is the only workaround - I couldn't see relevant > patches in Open/NetBSD either that might have fixed this issue :-( The volume da1 is indeed >2TB, but it is not connected to the controller; it (along with da0) is actually a RAID-10 array connected to a 3Ware/AMCC SATA controller. The Adaptec contoller is used only for the tape drives (the SDX-900V is AIT4; the SDX-1100 is AIT5), and they are <2TB. -- greg byshenk - gbyshenk@byshenk.net - Leiden, NL
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081124121048.GB4609>