Date: Thu, 25 Feb 2010 14:41:56 +0100 From: Giovanni Trematerra <giovanni.trematerra@gmail.com> To: Anton Shterenlikht <mexas@bristol.ac.uk> Cc: freebsd-current@freebsd.org, marcel@freebsd.org, freebsd-ia64@freebsd.org Subject: Re: panic ia64 r204293 Message-ID: <4e6cba831002250541j1ec3b7b2odbed3a74e972675d@mail.gmail.com> In-Reply-To: <20100225131426.GG42030@mech-cluster241.men.bris.ac.uk> References: <20100225131426.GG42030@mech-cluster241.men.bris.ac.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Feb 25, 2010 at 2:14 PM, Anton Shterenlikht <mexas@bristol.ac.uk> w= rote: > > I'm upgrading from 8.0-stable to 9.0-current. > Got this panic. > > Any advice? Do you have options SMP in your custom kernel? Try to boot with GENERIC kernel. > > many thanks > anton > > ###################################### > > Loading.: FreeBSD > Starting: FreeBSD > Consoles: EFI console > > FreeBSD/ia64 EFI boot, Revision 2.1 > (mexas@mech-as28.men.bris.ac.uk, Thu Feb 25 10:06:10 GMT 2010) > Loading /boot/defaults/loader.conf > /boot/kernel/kernel data=3D0xa5209d+0x1c6933 syms=3D[0x8+0x80400+0x8+0x75= 1a2] > \ > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/boot/kernel/kernel]... > Entering /boot/kernel/kernel at 0xe000000004078000... > GDB: debug ports: uart > GDB: current port: uart > KDB: debugger backends: ddb gdb > KDB: current backend: ddb > Copyright (c) 1992-2010 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > =A0 =A0 =A0 =A0The Regents of the University of California. All rights re= served. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 9.0-CURRENT #0 r204293: Thu Feb 25 12:38:11 GMT 2010 > =A0 =A0mexas@mech-as28.men.bris.ac.uk:/usr/obj/usr/src/sys/ZEEV ia64 > WARNING: WITNESS option enabled, expect reduced performance. > CPU: Madison II (1600 Mhz Itanium 2) > =A0Origin =3D "GenuineIntel" =A0Revision =3D 2 > =A0Features =3D 0x1<LB> > real memory =A0=3D 12849717248 (12254 MB) > avail memory =3D 12585984000 (12002 MB) > FPSWA Revision =3D 0x10012, Entry =3D 0xe0000040ffcc4050 > ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16 (20100121/tbfadt= -625) > ACPI Warning: 32/64X length mismatch in Gpe1Block: 32/16 (20100121/tbfadt= -625) > acpi0: <HP> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: Sleep Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0: <32-bit timer at 3.579545MHz> iomem 0xff5c1004-0xff5c1007 on= acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > pcib0: <ACPI Host-PCI bridge> on acpi0 > pci0: <ACPI PCI bus> on pcib0 > ohci0: <NEC uPD 9210 USB controller> mem 0x80002000-0x80002fff irq 16 at = device 1.0 on pci0 > ohci0: [ITHREAD] > usbus0: <NEC uPD 9210 USB controller> on ohci0 > ohci1: <NEC uPD 9210 USB controller> mem 0x80001000-0x80001fff irq 17 at = device 1.1 on pci0 > ohci1: [ITHREAD] > usbus1: <NEC uPD 9210 USB controller> on ohci1 > ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x80000000-0x800000ff irq = 18 at device 1.2 on pci0 > ehci0: [ITHREAD] > usbus2: EHCI version 0.95 > usbus2: <NEC uPD 720100 USB 2.0 controller> on ehci0 > pci0: <mass storage, ATA> at device 2.0 (no driver attached) > pcib1: <ACPI Host-PCI bridge> on acpi0 > pci32: <ACPI PCI bus> on pcib1 > mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2100-0x21ff mem 0x903a0000-0x= 903bffff,0x90380000-0x9039ffff irq 27 at device 1.0 on pci32 > mpt0: [ITHREAD] > mpt0: MPI Version=3D1.2.12.0 > mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x2000-0x20ff mem 0x90360000-0x= 9037ffff,0x90340000-0x9035ffff irq 28 at device 1.1 on pci32 > mpt1: [ITHREAD] > mpt1: MPI Version=3D1.2.12.0 > em0: <Intel(R) PRO/1000 Network Connection 6.9.25> port 0x2240-0x227f mem= 0x90320000-0x9033ffff,0x90280000-0x902fffff irq 29 at device 2.0 on pci32 > em0: [FILTER] > em0: Ethernet address: 00:13:21:5b:05:1c > em1: <Intel(R) PRO/1000 Network Connection 6.9.25> port 0x2200-0x223f mem= 0x90300000-0x9031ffff irq 30 at device 2.1 on pci32 > em1: [FILTER] > em1: Ethernet address: 00:13:21:5b:05:1d > pcib2: <ACPI Host-PCI bridge> on acpi0 > pci64: <ACPI PCI bus> on pcib2 > pcib3: <ACPI Host-PCI bridge> on acpi0 > pci96: <ACPI PCI bus> on pcib3 > pcib4: <ACPI Host-PCI bridge> on acpi0 > pci128: <ACPI PCI bus> on pcib4 > pcib5: <ACPI Host-PCI bridge> on acpi0 > pci192: <ACPI PCI bus> on pcib5 > isp0: <Qlogic ISP 2422 PCI FC-AL Adapter> port 0xc000-0xc0ff mem 0xe00400= 00-0xe0040fff irq 71 at device 1.0 on pci192 > isp0: [ITHREAD] > pcib6: <ACPI Host-PCI bridge> on acpi0 > pci224: <ACPI PCI bus> on pcib6 > uart0: <16550 or compatible> mem 0xf8051000-0xf805100f irq 82 at device 1= .0 on pci224 > uart0: [FILTER] > puc0: <HP Diva Serial [GSP] uart1: <Non-standard ns8250 class UART with F= IFOs> on puc0 > uart1: [FILTER] > uart1: console (9600,n,8,1) > uart2: <Non-standard ns8250 class UART with FIFOs> on puc0 > uart2: [FILTER] > uart3: <Non-standard ns8250 class UART with FIFOs> on puc0 > uart3: [FILTER] > vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xf0000000-0xf7f= fffff,0xf8040000-0xf804ffff at device 2.0 on pci224 > uart4: <16550 or compatible> iomem 0xff5e0000-0xff5e0007 irq 34 on acpi0 > uart4: [FILTER] > uart5: <16550 or compatible> iomem 0xff5e2000-0xff5e2007 irq 35 on acpi0 > uart5: [FILTER] > uart5: debug port (9600,n,8,1) > Timecounter "ITC" frequency 1600000000 Hz quality 0 > Timecounters tick every 1.000 msec > IP Filter: v4.1.28 initialized. =A0Default =3D block all, Logging =3D ena= bled > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 480Mbps High Speed USB v2.0 > (xpt0:isp0:0:-1:-1): rescan already queued > ugen0.1: <NEC> at usbus0 > uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > ugen1.1: <NEC> at usbus1 > uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1: <NEC> at usbus2 > uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 > uhub1: 2 ports with 2 removable, self powered > uhub0: 3 ports with 3 removable, self powered > (probe2:isp0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe2:isp0:0:0:0): CAM status: SCSI Status Error > (probe2:isp0:0:0:0): SCSI status: Check Condition > (probe2:isp0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset= , or bus device reset occurred) > uhub2: 5 ports with 5 removable, self powered > pass1 at isp0 bus 0 scbus2 target 0 lun 0 > pass1: <COMPAQ MSA1000 4.32> Fixed Storage Array SCSI-4 device > pass1: 200.000MB/s transfers > > pass1: Command Queueing enabledda0 at mpt0 bus 0 scbus0 target 0 lun 0 > da0: <HP 73.4G ST373454LC HPC3> Fixed Direct Access SCSI-3 device > da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit) > > da0: Command Queueing enabledda0: 70007MB (143374738 512 byte sectors: 25= 5H 63S/T 8924C) > WARNING: WITNESS option enabled, expect reduced performance. > Trying to mount root from ufs:/dev/da0p2 > Setting hostuuid: b7d52c2d-212f-11df-b7b0-0013215b051c. > Setting hostid: 0xe71df9eb. > No suitable dump device was found. > Entropy harvesting: interrupts ethernet point_to_pointpanic: sysctl_netis= r_workstream: counter too big (1) > KDB: enter: panic > [ thread pid 56 tid 100059 ] > Stopped at =A0 =A0 =A0kdb_enter+0x92: [I2] =A0 =A0addl r14=3D0xffffffffff= e21d48,gp ;; > db> bt > Tracing pid 56 tid 100059 td 0xe0000000116046e0 > kdb_enter(0xe0000000048f2d68, 0xe0000000048f2d68, 0xe000000004438460, 0x7= 93) at kdb_enter+0x92 > panic(0xe00000000490a1f8, 0x1, 0xe00000000490a080, 0x4c6) at panic+0x210 > sysctl_netisr_workstream(0xe000000004a15788, 0x0, 0x0, 0xe000000004d10810= , 0xe00000000490a080) at sysctl_netisr_workstream+0x200 > sysctl_root(0x0, 0x0, 0x0, 0xa000000127c6b320) at sysctl_root+0x350 > userland_sysctl(0xe0000000048f3b20, 0xa000000127c6b390, 0x3, 0xe000000004= a661f8, 0xa000000127c6b360, 0xa000000127c6b340, 0x0, 0x0) at userland_sysct= l+0x300 > __sysctl(0xe0000000116046e0, 0xa000000127c6b3f0, 0x0, 0xa000000127c6b500)= at __sysctl+0xe0 > syscall(0xa000000127c6b400, 0xca, 0x0, 0xe0000000116046e0, 0xe00000001130= 5120, 0xca, 0xe0000000049fd388, 0xa000000127c6b4e8) at syscall+0x3b0 > epc_syscall_return() at epc_syscall_return > db> > > > > -- > Anton Shterenlikht > Room 2.6, Queen's Building > Mech Eng Dept > Bristol University > University Walk, Bristol BS8 1TR, UK > Tel: +44 (0)117 331 5944 > Fax: +44 (0)117 929 4423 > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org= " >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4e6cba831002250541j1ec3b7b2odbed3a74e972675d>