Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 4 Feb 2001 22:07:04 -0800
From:      "Crist J. Clark" <cjclark@reflexnet.net>
To:        current@freebsd.org
Subject:   Kernel Panic from Yesterday's CVSup
Message-ID:  <20010204220704.C91447@rfx-216-196-73-168.users.reflex>

next in thread | raw e-mail | index | archive | help

--PNTmBPCT7hxwcZjr
Content-Type: text/plain; charset=us-ascii

I don't recall reports of trouble with recent CURRENT, but my CVSup
from yesterday afternoon is panicing. Before I try too debug this, has
anyone been getting these or knows what I might be missing?

Boot messages and the panic info are attached.
-- 
Crist J. Clark                           cjclark@alum.mit.edu

--PNTmBPCT7hxwcZjr
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="boot.msg"

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Sun Feb  4 20:09:00 PST 2001
    cjc@bubbles.cjclark.org:/usr/obj/usr/src/sys/BUBBLES
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P54C (132.96-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x52b  Stepping = 11
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 33554432 (32768K bytes)
avail memory = 30130176 (29424K bytes)
Preloaded elf kernel "kernel" at 0xc02a9000.
Intel Pentium detected, installing workaround for F00F bug
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.1, connected at v1.1
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <display, VGA> at 8.0 (no driver attached)
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc1: cannot reserve I/O port range
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2 at port 0x3e8-0x3ef irq 5 on isa0
sio2: type 16550A
ep0: <3Com 3C509-TP EtherLink III> at port 0x300-0x30f irq 10 on isa0
ep0: Ethernet address 00:20:af:17:a3:e9
unknown: <PNP0700> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0680> can't assign resources
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging limited to 1000 packets/entry by default
ad0: 1222MB <QUANTUM FIREBALL1280A> [2484/16/63] at ata0-master BIOSPIO
acd0: CDROM <CD-532E-A> at ata0-slave using BIOSPIO
Mounting root from ufs:/dev/ad0s1a
kernel trap 12 with interrupts disabled


Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0xe
fault code              = supervisor read, page not present
instruction pointer     = 0x8:0xc01f2553
stack pointer           = 0x10:0xc3a2bf50
frame pointer           = 0x10:0xc3a2bf64
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = resume, IOPL = 0
current process         = 16 (irq14: ata0)
trap number             = 12
panic: page fault

syncing disks... 
done
Uptime: 0s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot <--

--PNTmBPCT7hxwcZjr
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=BUBBLES

# $Id: BUBBLES,v 1.4 2001/02/04 06:49:24 cjc Exp cjc $
#
# BUBBLES - 2000/11/11, cjc
#
# Kernel configuration for IBM Pentium 133
#
# 2000/12/09, cjc - DEVEL became BUBBLES
# 
machine		i386
cpu		I586_CPU
ident		BUBBLES
maxusers	32

#To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		#Default places to look for devices.

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
#options		DEVFS			#Device Filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	UCONSOLE		#Allow users to grab the console
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
#options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev

device		isa
device		pci
#options 	COMPAT_OLDISA		# compatability shims for lnc, le
#options 	COMPAT_OLDPCI		# compatability shims for lnc

# Floppy drives
device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
#device		atapifd			# ATAPI floppy drives
#device		atapist			# ATAPI tape drives
#options 	ATA_STATIC_ID		#Static device numbering
#options 	ATA_ENABLE_ATAPI_DMA	#Enable DMA on ATAPI devices

# atkbdc0 controls both the keyboard and the PS/2 mouse
#device		atkbdc	1	# At keyboard controller
#device		atkbd		# at keyboard
#device		psm		# psm mouse

#device		vga		# VGA screen

# splash screen/screen saver
#device		splash

# syscons is the default console driver, resembling an SCO console
#device		sc	1

# Floating point support - do not disable.
device		npx

# Power management support (see NOTES for more options)
device          apm

# Serial (COM) ports
device		sio		# 8250, 16[45]50 based serial ports

# Parallel port
device		ppc
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# ISA Ethernet NICs.  pccard nics included.
device		ep		# Etherlink III based cards

# Pseudo devices - the number indicates how many units to allocated.
device		random		# Entropy device
#options 	NOBLOCKRANDOM	# avoid any blocking on device random
device		loop		# Network loopback
device		ether		# Ethernet support
#device		sl		# Kernel SLIP
#device		ppp	1	# Kernel PPP
device		tun		# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
#device		md		# Memory "disks"
device		gif	4	# IPv6 and IPv4 tunneling
device		faith	1	# IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device		bpf		# Berkeley packet filter

# Needed for ipfwlogd development
options 	IPFIREWALL		#firewall
options 	IPFIREWALL_VERBOSE	#print information about
options 	IPFIREWALL_EXTRA_VERBOSE	#print TCP flag information
options 	IPFIREWALL_VERBOSE_LIMIT=1000	#limit verbosity
options         IPDIVERT                #divert sockets
#End

--PNTmBPCT7hxwcZjr--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010204220704.C91447>