Date: Tue, 26 Sep 1995 11:31:45 -0700 From: "Brett J. Vickers" <bvickers@bossanova.ICS.UCI.EDU> To: hackers@freebsd.org Subject: ATAPI and Hitachi IDE CDROM support Message-ID: <9509261136.aa14487@paris.ics.uci.edu>
next in thread | raw e-mail | index | archive | help
I've been trying to get FreeBSD to recognize my Hitachi IDE CDROM
drive at bootup, but it fails everytime. I've applied the 1.5 atapi
patch to the current kernel. Here's the relevant portion of dmesg:
FreeBSD 2.2-CURRENT #: Sun Sep 24 14:07:38 PDT 1995
root@george.ics.uci.edu:/usr/src/sys/compile/GEORGE
CPU: 100-MHz Pentium 815\\100 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
[...]
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <SAMSUNG PLS-31274A>
wd0: 1213MB (2485728 sectors), 2466 cyls, 16 heads, 63 S/T, 512 B/S
atapi0.1 at 0x1f0: attach called
atapi.1 at 0x1f0: identify not ready, status=1<check>
npx0 on motherboard
Any suggestions?
Brett
---
#
# GEORGE - config
#
machine "i386"
cpu "I386_CPU"
cpu "I486_CPU"
cpu "I586_CPU"
ident GENERIC
maxusers 16
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3
options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
options ATAPI #Enable ATAPI support for IDE bus
config kernel root on wd0
controller isa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
#disk fd1 at fdc0 drive 1
#tape ft0 at fdc0 drive 2
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
device wcd0 #IDE CDROM
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1
#options XSERVER # include code for XFree86
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device ed0 at isa? port 0x300 net irq 3 iomem 0xd8000 vector edintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device sl 1
# ijppp uses tun instead of ppp device
#pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi? <9509261136.aa14487>