Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 21 Mar 2000 16:33:16 -0500 (EST)
From:      Daniel Eischen <eischen@vigrid.com>
To:        "Kenneth D. Merry" <ken@kdm.org>
Cc:        Mark Ovens <mark@dogma.freebsd-uk.eu.org>, questions@FreeBSD.ORG, current@FreeBSD.ORG
Subject:   Re: SCSI errors from xmcd
Message-ID:  <Pine.SUN.3.91.1000321162923.1978A-100000@pcnet1.pcnet.com>
In-Reply-To: <20000321135046.A41348@panzer.kdm.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 21 Mar 2000, Kenneth D. Merry wrote:
> On Tue, Mar 21, 2000 at 20:15:29 +0000, Mark Ovens wrote:
> > Since u/g to 4.0 I've had problems with audio CD players and my
> > Toshiba XM6201 SCSI CD drive, cdcontrol and xmcd. Re-MAKEDEV'ing all
> > the cd devices has got cdcontrol working but still xmcd (v2.6)
> > doesn't. It all worked fine under 3.4-STABLE
> > 
> > Starting it with ``-debug'' yields a constant (one every few seconds)
> > stream  of:
> > 
> > SCSI CDB bytes (dev=/dev/rcd0c rw=0 to=20):
> > 0000    00 00 00 00 00 00 -- --  -- -- -- -- -- -- -- --    ................
> > CD audio: SCSI command fault on /dev/rcd0c:
> > Status=0x16
> > 
> > Is this because xmcd needs updating to work with the new CAM system,
> > or something else?
> 
> You need to recompile xmcd.

Also be sure you have an imake that doesn't use cpp:

  strings /usr/X11R6/bin/imake | grep cpp
  /usr/libexec/cpp

That would be wrong, and if you rebuilt xmcd with that imake
it wouldn't work.  To get xmcd to build correctly, set
IMAKECPP=/usr/bin/cpp in your environment before building
xmcd.

Dan Eischen
eischen@vigrid.com



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.SUN.3.91.1000321162923.1978A-100000>