Date: Thu, 26 Dec 2002 20:46:43 GMT From: Hubert Tournier <hubert@tournier.org> To: FreeBSD-gnats-submit@FreeBSD.org Subject: i386/46553: System freezes after awakening from hibernation Message-ID: <200212262046.gBQKkhwB052532@iris.co.fr.clara.net>
next in thread | raw e-mail | index | archive | help
>Number: 46553
>Category: i386
>Synopsis: System freezes after awakening from hibernation
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Dec 26 11:50:02 PST 2002
>Closed-Date:
>Last-Modified:
>Originator: Hubert Tournier <hubert@frbsd.org>
>Release: FreeBSD 5.0-RC1 i386
>Organization:
Maison
>Environment:
System: FreeBSD herisson.maison 5.0-RC1 FreeBSD 5.0-RC1 #0: Tue Dec 10 17:20:33 CET 2002 root@:/usr/src/sys/i386/compile/HERISSON i386
Machine: Toshiba Satellite 4080XCDT laptop
>Description:
When I fold the screen of my laptop, wait a few seconds,
then reopen the screen, the system prints "ata0: resetting
devices .." (in bold) then freezes. I have to power off
the laptop in order to get out of this situation.
There's no relevant message in /var/log/messages.
Hereafter follows the dmesg output after rebooting (hoping
it might be useful) :
--- dmesg begins here ---
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RC1 #0: Tue Dec 10 17:20:33 CET 2002
root@:/usr/src/sys/i386/compile/HERISSON
Preloaded elf kernel "/boot/kernel.HERISSON/kernel" at 0xc03f2000.
Preloaded elf module "/boot/kernel.HERISSON/vesa.ko" at 0xc03f20b4.
Preloaded elf module "/boot/kernel.HERISSON/snd_ess.ko" at 0xc03f2168.
Preloaded elf module "/boot/kernel.HERISSON/snd_pcm.ko" at 0xc03f2220.
Preloaded elf module "/boot/kernel.HERISSON/snd_sbc.ko" at 0xc03f22d8.
Preloaded elf module "/boot/kernel.HERISSON/acpi.ko" at 0xc03f2390.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 184560358 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (184.56-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201195520 (191 MB)
avail memory = 191127552 (182 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
VESA: v2.0, 2560k memory, flags:0x0, mode table:0xc00c8030 (c0008030)
VESA: Copyright 1997 TRIDENT MICROSYSTEMS INC.
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750 > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
Using $PIR table, 7 entries at 0xc00f0180
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
cbb0: <ToPIC97 PCI-CardBus Bridge> at device 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pcib0: slot 2 INTA is routed to irq 11
cbb1: <ToPIC97 PCI-CardBus Bridge> at device 2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pcib0: slot 2 INTB is routed to irq 11
pci0: <display, VGA> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 5.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached)
pci0: <simple comms> at device 7.0 (no driver attached)
pci0: <simple comms> at device 10.0 (no driver attached)
pci0: <multimedia, audio> at device 12.0 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ad0: 6194MB <TOSHIBA MK6411MAT> [13424/15/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-1802D> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
WARNING: /home was not properly dismounted
WARNING: /tmp was not properly dismounted
/tmp: superblock summary recomputed
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 20 files 1
--- dmesg ends here ---
>How-To-Repeat:
Fold the screen, wait 30 seconds, open the screen.
>Fix:
No known work around except avoiding closing the screen.
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200212262046.gBQKkhwB052532>