Date: Wed, 24 Sep 2003 23:38:55 +0800 (KRAST) From: Eugene Grosbein <eugen@kuzbass.ru> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/57174: 4.9-PRERELEASE panic: ata_dmasetup: transfer active on this device! Message-ID: <200309241538.h8OFct3W000458@grosbein.pp.ru> Resent-Message-ID: <200309241550.h8OFoIL8006541@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 57174 >Category: kern >Synopsis: 4.9-PRERELEASE panic: ata_dmasetup: transfer active on this device! >Confidential: no >Severity: serious >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Sep 24 08:50:17 PDT 2003 >Closed-Date: >Last-Modified: >Originator: Eugene Grosbein >Release: FreeBSD >Organization: Svyaz Service JSC >Environment: System: FreeBSD grosbein.pp.ru 4.9-PRERELEASE FreeBSD 4.9-PRERELEASE #20: Wed Sep 24 21:03:53 KRAST 2003 eu@grosbein.pp.ru:/usr/local/obj/usr/local/src/sys/DADV i386 CPUTYPE=i686 and no other optimizations >Description: Today I've upgraded my early 4.9-PRERELEASE to RELENG_4, after I've received 4.9-BETA announcement. Full cycle was completed: make builworld, make kernel, make installworld, mergemaster. I decided to make index of my local copy of Maxim Moshkow library (4.6Gb of texts) using following command: glimpseindex -H /home/moshkow/.g -B -b -f -M 256 -n -t /home/moshkow I use glimpse-4.12.6 that was built 17 Jun 2002 using ports. It started to work making heavy load to my system, both of CPU and hard drive. Meantime I went online using pppd and started to surf the web using lynx. Suddenly my previously rock-stable system crashed. Here comes GDB backtrace. GNU gdb 4.18 (FreeBSD) Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-unknown-freebsd"...Deprecated bfd_read called at /usr/local/src/gnu/usr.bin/binutils/gdb/../../../../contrib/gdb/gdb/dbxread.c line 2627 in elfstab_build_psymtabs Deprecated bfd_read called at /usr/local/src/gnu/usr.bin/binutils/gdb/../../../../contrib/gdb/gdb/dbxread.c line 933 in fill_symbuf IdlePTD at phsyical address 0x003c5000 initial pcb at physical address 0x0031baa0 panicstr: ata_dmasetup: transfer active on this device! panic messages: --- panic: ata_dmasetup: transfer active on this device! syncing disks... ad2: WRITE command timeout tag=1 serv=0 - resetting ad2: invalidating queued requests ata1: resetting devices .. ad2: invalidating queued requests done ad2: no request for tag=2 ad2: invalidating queued requests 67 43 43 43 43 43 43 43 59 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 ad2: READ command timeout tag=2 serv=0 - resetting ad2: invalidating queued requests ata1: resetting devices .. ad2: invalidating queued requests done 43 ad2: no request for tag=2 ad2: invalidating queued requests 0xc7c562f8 1: dev:#ad/0x20017, flags:20000000, blkno:27213840, lblkno:27213840 0xc7c3d388 2: dev:#ad/0x20017, flags:20000000, blkno:27249392, lblkno:27249392 0xc7c3bc30 3: dev:#ad/0x20017, flags:20000000, blkno:26315504, lblkno:26315504 0xc7c2810c 4: dev:#ad/0x20017, flags:20000000, blkno:26402832, lblkno:26402832 0xc7c260a0 5: dev:#ad/0x20017, flags:20000000, blkno:27123728, lblkno:27123728 0xc7c1cb7c 6: dev:#ad/0x20017, flags:20000000, blkno:26697168, lblkno:26697168 0xc7c0ef04 7: dev:#ad/0x20017, flags:20000000, blkno:26729952, lblkno:26729952 0xc7c0d8f8 8: dev:#ad/0x20017, flags:20000000, blkno:26348288, lblkno:26348288 0xc7c09588 9: dev:#ad/0x20017, flags:20000000, blkno:16605456, lblkno:16605456 0xc7c00978 10: dev:#ad/0x20017, flags:20000000, blkno:26312720, lblkno:26312720 0xc7bfe674 11: dev:#ad/0x20017, flags:20000000, blkno:27310672, lblkno:27310672 0xc7bd2cbc 12: dev:#ad/0x20017, flags:21021024, blkno:16580688, lblkno:16580688 0xc7bd1be0 13: dev:#ad/0x20017, flags:20000000, blkno:27037472, lblkno:27037472 0xc7b98d78 14: dev:#ad/0x20017, flags:20000000, blkno:26763280, lblkno:26763280 giving up on 14 buffers Uptime: 18m25s /dev/vmmon: Module vmmon: unloaded dumping to dev #ad/0x20011, offset 128 dump ata1: resetting devices .. ad2: invalidating queued requests done 319 318 317 316 315 314 313 312 311 310 309 308 307 306 305 304 303 302 301 300 299 298 297 296 295 294 293 292 291 290 289 288 287 286 285 284 283 282 281 280 279 278 277 276 275 274 273 272 271 270 269 268 267 266 265 264 263 262 261 260 259 258 257 256 255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240 239 238 237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143 142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 6! 3 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 --- #0 dumpsys () at /usr/local/src/sys/kern/kern_shutdown.c:487 487 if (dumping++) { (kgdb) bt #0 dumpsys () at /usr/local/src/sys/kern/kern_shutdown.c:487 #1 0xc0161278 in boot (howto=256) at /usr/local/src/sys/kern/kern_shutdown.c:316 #2 0xc01616c5 in panic ( fmt=0xc0291120 "ata_dmasetup: transfer active on this device!") at /usr/local/src/sys/kern/kern_shutdown.c:595 #3 0xc01335fc in ata_dmastart (atadev=0xc13e5530, data=0xcc5da000 <Address 0xcc5da000 out of bounds>, count=131072, dir=1) at /usr/local/src/sys/dev/ata/ata-dma.c:1374 #4 0xc013556f in ad_service (adp=0xc1402400, change=1) at /usr/local/src/sys/dev/ata/ata-disk.c:787 #5 0xc0134c6f in ad_transfer (request=0xc20b4f80) at /usr/local/src/sys/dev/ata/ata-disk.c:499 #6 0xc012bda7 in ata_start (ch=0xc13e5500) at /usr/local/src/sys/dev/ata/ata-all.c:681 #7 0xc01346c8 in adstrategy (bp=0xc7b91b58) at /usr/local/src/sys/dev/ata/ata-disk.c:307 #8 0xc016b501 in diskstrategy (bp=0xc7b91b58) at /usr/local/src/sys/kern/subr_disk.c:251 #9 0xc019ce4f in spec_strategy (ap=0xcf70acb4) at /usr/local/src/sys/miscfs/specfs/spec_vnops.c:479 #10 0xc019c7f5 in spec_vnoperate (ap=0xcf70acb4) at /usr/local/src/sys/miscfs/specfs/spec_vnops.c:119 #11 0xc0202e3d in ufs_vnoperatespec (ap=0xcf70acb4) ---Type <return> to continue, or q <return> to quit--- at /usr/local/src/sys/ufs/ufs/ufs_vnops.c:2394 #12 0xc020270d in ufs_strategy (ap=0xcf70acf8) at vnode_if.h:944 #13 0xc0202e05 in ufs_vnoperate (ap=0xcf70acf8) at /usr/local/src/sys/ufs/ufs/ufs_vnops.c:2376 #14 0xc0188c07 in bwrite (bp=0xc7b91b58) at vnode_if.h:944 #15 0xc018e95b in vop_stdbwrite (ap=0xcf70ad34) at /usr/local/src/sys/kern/vfs_default.c:344 #16 0xc018e771 in vop_defaultop (ap=0xcf70ad34) at /usr/local/src/sys/kern/vfs_default.c:152 #17 0xc0202e05 in ufs_vnoperate (ap=0xcf70ad34) at /usr/local/src/sys/ufs/ufs/ufs_vnops.c:2376 #18 0xc0188fa6 in bawrite (bp=0xc7b91b58) at vnode_if.h:1193 #19 0xc018df77 in cluster_wbuild (vp=0xcfa43cc0, size=8192, start_lbn=23452, len=16) at /usr/local/src/sys/kern/vfs_cluster.c:945 #20 0xc018da92 in cluster_write (bp=0xc7c67c64, filesize=192118784, seqcount=127) at /usr/local/src/sys/kern/vfs_cluster.c:576 #21 0xc01fc33f in ffs_write (ap=0xcf70ae74) at /usr/local/src/sys/ufs/ufs/ufs_readwrite.c:570 #22 0xc0198c42 in vn_write (fp=0xc1f65c80, uio=0xcf70aee0, cred=0xc195b700, flags=0, p=0xcf63f220) at vnode_if.h:363 #23 0xc0171096 in dofilewrite (p=0xcf63f220, fp=0xc1f65c80, fd=11, buf=0x18570000, nbyte=8192, offset=-1, flags=0) at /usr/local/src/sys/sys/file.h:163 #24 0xc0170f47 in write (p=0xcf63f220, uap=0xcf70af80) ---Type <return> to continue, or q <return> to quit--- at /usr/local/src/sys/kern/sys_generic.c:329 #25 0xc0272301 in syscall2 (frame={tf_fs = 408354863, tf_es = 672333871, tf_ds = -1078001617, tf_edi = 408354816, tf_esi = 672345944, tf_ebp = -1077958108, tf_isp = -814698540, tf_ebx = 672270316, tf_edx = 672345944, tf_ecx = 0, tf_eax = 4, tf_trapno = 0, tf_err = 2, tf_eip = 672229000, tf_cs = 31, tf_eflags = 659, tf_esp = -1077958152, tf_ss = 47}) at /usr/local/src/sys/i386/i386/trap.c:1175 #26 0xc0265345 in Xint0x80_syscall () #27 0x2811432d in ?? () #28 0x28114295 in ?? () #29 0x281110a6 in ?? () #30 0x280fbcb5 in ?? () #31 0x8055146 in ?? () #32 0x8051b68 in ?? () #33 0x8052603 in ?? () #34 0x8050510 in ?? () #35 0x804ad64 in ?? () #36 0x8049361 in ?? () (kgdb) q Here comes /var/run/dmesg.boot Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-PRERELEASE #20: Wed Sep 24 21:03:53 KRAST 2003 eu@grosbein.pp.ru:/usr/local/obj/usr/local/src/sys/DADV Timecounter "i8254" frequency 1193165 Hz CPU: Intel Celeron (902.03-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 335478784 (327616K bytes) config> flags atkbd 0x0 config> quit avail memory = 322236416 (314684K bytes) Preloaded elf kernel "kernel" at 0xc03a6000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03a609c. VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc00c0e38 (c0000e38) VESA: S3 Incorporated Trio3D. Pentium Pro MTRR support enabled Using $PIR table, 8 entries at 0xc00fdef0 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <S3 Trio3D graphics accelerator> at 0.0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 11 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uscanner0: Hewlett-Packard HP ScanJet 2200C, rev 1.10/1.00, addr 2 uhid0: American Power Conversion Back-UPS 500 FW: 6.5.I USB FW: c1 , rev 1.10/1.00, addr 3, iclass 3/0 intpm0: <Intel 82371AB Power management controller> port 0x5000-0x500f irq 9 at device 7.3 on pci0 intpm0: I/O mapped 5000 intpm0: intr IRQ 9 enabled revision 0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus general purpose I/O> on smbus0 intpm0: PM I/O mapped 4000 fxp0: <Intel 82559 Pro/100 Ethernet> port 0xe400-0xe43f mem 0xe5000000-0xe50fffff,0xe5100000-0xe5100fff irq 10 at device 15.0 on pci0 fxp0: Ethernet address 00:90:27:a7:5c:72 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model NetMouse/NetScroll Optical, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <24 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: IEEE1284 device found /NIBBLE/ECP Probing for PnP devices on ppbus0: ppbus0: <HEWLETT-PACKARD DESKJET 610C> MLC,PCL,PML lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pcm0: <Yamaha OPL-SAx> at port 0x220-0x22f,0x530-0x537,0x388-0x38f,0x330-0x331,0x370-0x371 irq 5 drq 0,1 on isa0 DUMMYNET initialized (011031) IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging IPsec: Initialized Security Association Processing. ad0: 6149MB <WDC AC26400B> [13328/15/63] at ata0-master UDMA33 ad2: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata1-master tagged UDMA33 acd0: CD-RW <SONY CD-RW CRX140E> at ata0-slave UDMA33 Mounting root from ufs:/dev/ad2s1a WARNING: / was not properly dismounted Now kernel config file: #for strings -n 3 /kernel | grep ^___ | sed -e 's/^___//' > MYKERNEL options INCLUDE_CONFIG_FILE machine i386 #cpu I386_CPU #cpu I486_CPU #cpu I586_CPU cpu I686_CPU options CPU_ENABLE_SSE #enables SSE/MMX2 instructions support. ident DADV maxusers 128 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options CLK_CALIBRATION_LOOP options "CLK_USE_I8254_CALIBRATION" options CLK_USE_TSC_CALIBRATION options INET #InterNETworking #options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] #options MFS #Memory Filesystem #options MD_ROOT #MD is a potential root device #options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem #options CD9660 #ISO 9660 Filesystem #options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem #options EXT2FS #Linux ext2 filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options CPU_SUSP_HLT #options "NO_F00F_HACK" options USER_LDT options PPP_BSDCOMP options PPP_DEFLATE options PPP_FILTER options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options SHMALL=4097 options SHMMAXPGS=4097 options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1) options SEMMAP=255 options SEMMNI=235 options SEMMNS=255 options SEMMNU=235 options SEMMSL=255 options SEMOPM=201 options SEMUME=201 options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options _KPOSIX_VERSION=199309L options ICMP_BANDLIM #Rate limit bad replies #options FDESC options NSWAPDEV=4 device isa device eisa device pci options AUTO_EOI_1 # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # ATA and ATAPI devices #device ata0 at isa? port IO_WD1 irq 14 flags 0xb0ffb0ff #device ata1 at isa? port IO_WD2 irq 15 flags 0xb0ffb0ff device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 # Options for atkbd: options ATKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions ATKBD_DFLT_KEYMAP="ru.koi8-r.pdwn" device psm0 at atkbdc? irq 12 device vga0 at isa? options VESA options VGA_WIDTH90 # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp866 options MAXCONS=24 options SC_HISTORY_SIZE=1000 options SC_MOUSE_CHAR=0x03 #options SC_TWOBUTTON_MOUSE options SC_PIXEL_MODE # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) #device apm0 at nexus? flags 0x31 # Advanced Power Management device apm0 at nexus? # Advanced Power Management # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device miibus device fxp # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer #device plip # TCP/IP over parallel device ppi # Parallel port interface device #device joy0 at isa? port IO_GAME # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 2 # Kernel SLIP pseudo-device ppp 2 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty 16 # Pseudo-ttys (telnet etc) #pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) pseudo-device snp #pseudo-device vn pseudo-device gzip # Exec gzipped a.out's pseudo-device speaker # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter options MSGBUF_SIZE=40960 device pcm #options QUOTA options IPFIREWALL options IPFIREWALL_VERBOSE #options "IPFIREWALL_VERBOSE_LIMIT=100" options IPDIVERT options IPSTEALTH options DUMMYNET options SOFTUPDATES #device smbus0 #device iicbus0 #device iicbb0 #device intpm0 #device smb0 at smbus? device smbus #device iicbus #device iicbb device intpm #device alpm #device ichsmb device smb #device ic #device iic #device iicsmb options DDB options DDB_UNATTENDED #options LIBMCHAIN #options LIBICONV #options NETSMB #options NETSMBCRYPTO options RANDOM_IP_ID #options SMBFS options UFS_DIRHASH options PQ_CACHESIZE=128 # color for 128k/16k cache options SHOW_BUSYBUFS device uhci #device ohci device usb device uscanner device ugen device uhid device ucom device tap #options SHUTDOWN_BEEP options IPSEC #IP security options IPSEC_ESP #IP security (crypto; define w/ IPSEC) options INVARIANTS options INVARIANT_SUPPORT Here is /boot/loader.conf hw.ata.wc=1 hw.ata.ata_dma=1 hw.ata.tags=1 hw.ata.atapi_dma=1 userconfig_script_load="YES" #uscanner_load="YES" autoboot_delay=2 rootdevname="/dev/ad0a" # why is it here? do not remember #if_fxp_load="YES" >How-To-Repeat: I'll try to reproduce this after PR will be sent successfully. >Fix: Unknown for me. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200309241538.h8OFct3W000458>