Date: Sun, 23 Dec 2012 14:46:00 +0100 From: Marten Vijn <info@martenvijn.nl> To: Chris Rees <utisoft@gmail.com> Cc: Adrian Chadd <adrian@freebsd.org>, Sergey Kandaurov <pluknet@gmail.com>, FreeBSD <freebsd-stable@freebsd.org>, jakub_lach@mailplus.pl Subject: Re: 9.1 minimal ram requirements Message-ID: <50D70B18.5030307@martenvijn.nl> In-Reply-To: <CADLo83_sTQm0Bd8gsct3HSAS8Ynp8TVF5_8-P3sQcfStqs=FLg@mail.gmail.com> References: <1356218834151-5771583.post@n5.nabble.com> <50D644E5.9070801@martenvijn.nl> <CAE-mSOLQrWfEb8Wr4Hd1yU10DsJW_koB-PCA=RO5h1xvP_CT6Q@mail.gmail.com> <CAJ-VmonROy6VnsPDOHwSU08VxM=9OwhhYz97QS0mj8CGszQaLA@mail.gmail.com> <CADLo83_sTQm0Bd8gsct3HSAS8Ynp8TVF5_8-P3sQcfStqs=FLg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 12/23/2012 01:35 PM, Chris Rees wrote:
>
> On 23 Dec 2012 06:40, "Adrian Chadd" <adrian@freebsd.org
> <mailto:adrian@freebsd.org>> wrote:
> >
> > Hi guys,
> >
> > Would someone please file a PR for this? This is a huge unused
> > allocation of memory for something that honestly likely shouldn't have
> > been included by default in GENERIC.
> >
> > I've cc'ed ken on a reply to this. Hopefully after the holidays he can
> > chime in and figure out what's going on.
> >
> > Maybe just disabling it in GENERIC moving forward is enough - chances
> > are it'll be fine being just a module.
>
> Oh gods... Please let's just make it an erratum notice at this stage!
not sure if it helps, I 'vw setting up my old test env, while i tmp
resolved the issue by using 9.0, i am interested im getting 9.1 working
too...
The old test moved producion now, so i needed some time to get new
flashcards (which requierd new bioses etc etc) and some other minor fidling.
For this nanobsd image I used/tested svn revisons => 243710 ~ 244139
Marten
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-PRERELEASE #0 r244161: Thu Dec 13 08:46:37 CET 2012
root@brie:/usr/obj/nanobsd.full/i386.i386/usr/src/sys/KERNEL i386
CPU: AMD Am5x86 Write-Back (486-class CPU)
Origin = "AuthenticAMD" Id = 0x4f4 Family = 0x4 Model = 0xf
Stepping = 4
Features=0x1<FPU>
real memory = 67108864 (64 MB)
avail memory = 46436352 (44 MB)
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xc0dce310, 0) error 19
ctl: CAM Target Layer loaded
ACPI Error: A valid RSDP was not found (20110527/tbxfroot-237)
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
*** WARNING: missing CPU_ELAN -- timekeeping may be wrong
pcib0 pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 17.0 on pci0
pci1: <PCI bus> on pcib1
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xd000-0xd0ff mem
0xa4000000-0xa4000fff irq 9 at device 0.0 on pci1
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
nsphyter0: <DP83815 10/100 media interface> PHY 0 on miibus0
nsphyter0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:00:24:c7:aa:04
sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0xd100-0xd1ff mem
0xa4001000-0xa4001fff irq 9 at device 1.0 on pci1
sis1: Silicon Revision: DP83816A
miibus1: <MII bus> on sis1
nsphyter1: <DP83815 10/100 media interface> PHY 0 on miibus1
nsphyter1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis1: Ethernet address: 00:00:24:c7:aa:05
sis2: <NatSemi DP8381[56] 10/100BaseTX> port 0xd200-0xd2ff mem
0xa4002000-0xa4002fff irq 9 at device 2.0 on pci1
sis2: Silicon Revision: DP83816A
miibus2: <MII bus> on sis2
nsphyter2: <DP83815 10/100 media interface> PHY 0 on miibus2
nsphyter2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis2: Ethernet address: 00:00:24:c7:aa:06
sis3: <NatSemi DP8381[56] 10/100BaseTX> port 0xd300-0xd3ff mem
0xa4003000-0xa4003fff irq 9 at device 3.0 on pci1
sis3: Silicon Revision: DP83816A
miibus3: <MII bus> on sis3
nsphyter3: <DP83815 10/100 media interface> PHY 0 on miibus3
nsphyter3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis3: Ethernet address: 00:00:24:c7:aa:07
sis4: <NatSemi DP8381[56] 10/100BaseTX> port 0xe000-0xe0ff mem
0xa0000000-0xa0000fff irq 10 at device 18.0 on pci0
sis4: Silicon Revision: DP83815D
miibus4: <MII bus> on sis4
nsphyter4: <DP83815 10/100 media interface> PHY 0 on miibus4
nsphyter4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis4: Ethernet address: 00:00:24:c1:28:a4
sis5: <NatSemi DP8381[56] 10/100BaseTX> port 0xe100-0xe1ff mem
0xa0001000-0xa0001fff irq 11 at device 19.0 on pci0
sis5: Silicon Revision: DP83815D
miibus5: <MII bus> on sis5
nsphyter5: <DP83815 10/100 media interface> PHY 0 on miibus5
nsphyter5: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis5: Ethernet address: 00:00:24:c1:28:a5
sis6: <NatSemi DP8381[56] 10/100BaseTX> port 0xe200-0xe2ff mem
0xa0002000-0xa0002fff irq 5 at device 20.0 on pci0
sis6: Silicon Revision: DP83815D
miibus6: <MII bus> on sis6
nsphyter6: <DP83815 10/100 media interface> PHY 0 on miibus6
nsphyter6: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis6: Ethernet address: 00:00:24:c1:28:a6
cpu0 on motherboard
isa0: <ISA bus> on motherboard
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc8000-0xd0fff pnpid ORM0000 on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
ppc0: parallel port not found.
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
panic: kmem_malloc(4194304): kmem_map too small: 24313856 total allocated
cpuid = 0
KDB: stack backtrace:
#0 0xc0afcf6f at kdb_backtrace+0x4f
#1 0xc0ac972f at panic+0x16f
#2 0xc0d3788a at kmem_malloc+0x28a
#3 0xc0d2b087 at page_alloc+0x27
#4 0xc0d2d720 at uma_large_malloc+0x50
#5 0xc0ab388c at malloc+0x8c
#6 0xc04dceb8 at ctl_backend_ramdisk_init+0x78
#7 0xc04d7f94 at ctl_backend_register+0x104
#8 0xc04dce1b at cbr_modevent+0x2b
#9 0xc0ab5ee7 at module_register_init+0x107
#10 0xc0a78c3c at mi_startup+0xac
#11 0xc0494a25 at begin+0x2c
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
POST: 012345689bcefghipsajklnopqr,,,tvwxy
however
adding this to /boot/loader.conf (it was not mentioned in
/boot/defaults/loader.conf)
kern.cam.ctl.disable=1
get me booting.
Copyright (c) 1992-2012 The FreeBSD Project.uU��WVS��}
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
1993, 1994�i�7��
The Regents of the University of California. All rights
reserved. P��6HFreeBSD is a registered trademark of The FreeBSD
Foundation.
FreeBSD 9.1-PRERELEASE #0 r244161: Thu Dec 13 08:46:37 CET 2012
root@brie:/usr/obj/nanobsd.full/i386.i386/usr/src/sys/KERNEL i386
CPU: AMD Enhanced Am486DX4/Am5x86 Write-Back (486-class CPU)
Origin = "AuthenticAMD" Id = 0x494 Family = 0x4 Model = 0x9
Stepping = 4
Features=0x1<FPU>
real memory = 67108864 (64 MB)
avail memory = 46436352 (44 MB)
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xc0dce310, 0) error 19
ACPI Error: A valid RSDP was not found (20110527/tbxfroot-237)
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
*** WARNING: missing CPU_ELAN -- timekeeping may be wrong
pcib0 pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 17.0 on pci0
pci1: <PCI bus> on pcib1
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xd000-0xd0ff mem
0xa4000000-0xa4000fff irq 9 at device 0.0 on pci1
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
nsphyter0: <DP83815 10/100 media interface> PHY 0 on miibus0
nsphyter0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:00:24:c7:aa:04
sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0xd100-0xd1ff mem
0xa4001000-0xa4001fff irq 9 at device 1.0 on pci1
sis1: Silicon Revision: DP83816A
miibus1: <MII bus> on sis1
nsphyter1: <DP83815 10/100 media interface> PHY 0 on miibus1
nsphyter1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis1: Ethernet address: 00:00:24:c7:aa:05
sis2: <NatSemi DP8381[56] 10/100BaseTX> port 0xd200-0xd2ff mem
0xa4002000-0xa4002fff irq 9 at device 2.0 on pci1
sis2: Silicon Revision: DP83816A
miibus2: <MII bus> on sis2
nsphyter2: <DP83815 10/100 media interface> PHY 0 on miibus2
nsphyter2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis2: Ethernet address: 00:00:24:c7:aa:06
sis3: <NatSemi DP8381[56] 10/100BaseTX> port 0xd300-0xd3ff mem
0xa4003000-0xa4003fff irq 9 at device 3.0 on pci1
sis3: Silicon Revision: DP83816A
miibus3: <MII bus> on sis3
nsphyter3: <DP83815 10/100 media interface> PHY 0 on miibus3
nsphyter3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis3: Ethernet address: 00:00:24:c7:aa:07
sis4: <NatSemi DP8381[56] 10/100BaseTX> port 0xe000-0xe0ff mem
0xa0000000-0xa0000fff irq 10 at device 18.0 on pci0
sis4: Silicon Revision: DP83815D
miibus4: <MII bus> on sis4
nsphyter4: <DP83815 10/100 media interface> PHY 0 on miibus4
nsphyter4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis4: Ethernet address: 00:00:24:c1:28:a4
sis5: <NatSemi DP8381[56] 10/100BaseTX> port 0xe100-0xe1ff mem
0xa0001000-0xa0001fff irq 11 at device 19.0 on pci0
sis5: Silicon Revision: DP83815D
miibus5: <MII bus> on sis5
nsphyter5: <DP83815 10/100 media interface> PHY 0 on miibus5
nsphyter5: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis5: Ethernet address: 00:00:24:c1:28:a5
sis6: <NatSemi DP8381[56] 10/100BaseTX> port 0xe200-0xe2ff mem
0xa0002000-0xa0002fff irq 5 at device 20.0 on pci0
sis6: Silicon Revision: DP83815D
miibus6: <MII bus> on sis6
nsphyter6: <DP83815 10/100 media interface> PHY 0 on miibus6
nsphyter6: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis6: Ethernet address: 00:00:24:c1:28:a6
cpu0 on motherboard
isa0: <ISA bus> on motherboard
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc8000-0xd0fff pnpid ORM0000 on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
ppc0: parallel port not found.
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
Timecounters tick every 1.000 msec
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <SanDisk SDCFH-004G HDX 6.02> CFA-0 device
ada0: 16.700MB/s transfers (PIO4, PIO 512bytes)
ada0: 3815MB (7813120 512 byte sectors: 16H 63S/T 7751C)
ada0: Previously was known as ad0
Trying to mount root from ufs:/dev/ad0s1a [ro]...
Invalid time in real time clock.
Check and reset the date immediately!
Setting hostuuid: 8f738d8a-4d05-11e2-9c87-000024c7aa04.
Setting hostid: 0xe42da3f7.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 218040 free (2768 frags, 26909 blocks, 0.4%
fragmentation)
/dev/ad0s3: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3: clean, 2829 free (21 frags, 351 blocks, 0.7% fragmentation)
Mounting local file systems:.
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
Starting Network: lo0 sis0 sis1 sis2 sis3 sis4 sis5 sis6.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe8sis0: link state changed to DOWN
0::1%lo0 prefixlen 64 scopeid 0x8
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
sis0: flagssis1: link state changed to DOWN
=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=83808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC,LINKSTATE>
ether 0sis2: link state changed to DOWN
0:00:24:c7:aa:04
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carriersis3: link state changed to DOWN
sis1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=83808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC,LINKSTAsis4: link
state changed to DOWN
TE>
ether 00:00:24:c7:aa:05
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
statusis5: link state changed to DOWN
s: no carrier
sis2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=83808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_sis6: link state changed
to DOWN
MAGIC,LINKSTATE>
ether 00:00:24:c7:aa:06
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
sis3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=83808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC,LINKSTATE>
ether 00:00:24:c7:aa:07
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
sis4: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=83808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC,LINKSTATE>
ether 00:00:24:c1:28:a4
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
sis5: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=83808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC,LINKSTATE>
ether 00:00:24:c1:28:a5
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
sis6: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=83808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC,LINKSTATE>
ether 00:00:24:c1:28:a6
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
Starting devd.
Starting Network: sis0.
sis0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=83808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC,LINKSTATE>
ether 00:00:24:c7:aa:04
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
Starting Network: sis1.
sis1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=83808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC,LINKSTATE>
ether 00:00:24:c7:aa:05
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
Starting Network: sis2.
sis2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=83808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC,LINKSTATE>
ether 00:00:24:c7:aa:06
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
Starting Network: sis3.
sis3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=83808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC,LINKSTATE>
ether 00:00:24:c7:aa:07
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
Starting Network: sis4.
sis4: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=83808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC,LINKSTATE>
ether 00:00:24:c1:28:a4
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
Starting Network: sis5.
sis5: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=83808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC,LINKSTATE>
ether 00:00:24:c1:28:a5
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
Starting Network: sis6.
sis6: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=83808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC,LINKSTATE>
ether 00:00:24:c1:28:a6
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
Generating host.conf.
Creating and/or trimming log files.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib
a.out ldconfig path:
ldconfig: /var/run/ld.so.hints: No such file or directory
Clearing /tmp (X related).
Updating motd:.
Starting cron.
Starting background file system checks in 60 seconds.
Sun Dec 23 13:36:57 UTC 2012
FreeBSD/i386 (Amnesiac) (ttyu0)
login:
>
> Chris
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50D70B18.5030307>