Date: Tue, 30 Dec 2003 05:38:58 +0900 (JST) From: Hideki Yamamoto <hyama@acm.org> To: stable@freebsd.org Subject: Re: bge drivers does not work for 3COM 3C996-SX / 3C996B-T Message-ID: <20031230.053858.74753983.yamamoto436@oki.com> In-Reply-To: <20031229.191615.71155718.yamamoto436@oki.com> References: <200312282059.47990.wes@softweyr.com> <20031229.184207.74681106.yamamoto436@oki.com> <20031229.191615.71155718.yamamoto436@oki.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, I added code to recognize 3com 1000base-SX card as miibus and compiled them, but I do not have time to test yet. I think this may solove my original problem that link of SUN SX card does not go up, though 3com card goes up well. I will start testing it from Jan.4,2004. I uploaded the fixed code on my web page, http://members.aol.com/hyama99/. I appreciate If someone gives me comments on the code before testing. Date: Mon, 29 Dec 2003 19:16:15 +0900 (JST) > > Dear Peters > > > > > > > > > bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem > > > > 0xf7ef0000-0xf7efffff irq 10 at device 1.0 on pci1 bge0: Ethernet > > > > address: 00:04:76:e1:06:cf > > > > > > No miibus or PHY on bge0? > > > > Sorry, I cannot answer because my knowledge is not sufficient. > > Neither PHY nor miibus exist on bge0 and bge2. > Both bge0 and bge2 are SX cards. The following is the full dmesg. > bge1 and bge3 have miibus and phy. > ------------------------------------------------------------ > bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xf7ef0000-0xf7efffff irq 10 at device 1.0 on pci1 > bge0: Ethernet address: 00:04:76:e1:06:cf > bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ee0000-0xf7eeffff irq 11 at device 2.0 on pci1 > bge1: Ethernet address: 00:0b:cd:d2:b0:40 > miibus0: <MII bus> on bge1 > brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto > bge2: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xf7ff0000-0xf7ffffff irq 15 at device 1.0 on pci4 > bge2: Ethernet address: 00:0a:5e:1d:83:25 > bge3: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7fe0000-0xf7feffff irq 16 at device 2.0 on pci4 > bge3: Ethernet address: 00:0b:cd:d2:b0:3b > miibus1: <MII bus> on bge3 > brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto > bge0: gigabit link up > bge2: gigabit link up > ------------------------------------------------------------ Regards, Hideki Yamamoto
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031230.053858.74753983.yamamoto436>