Date: Mon, 29 Jan 96 13:31:12 EST From: jeff@stat.uconn.edu (Jeffrey M. Metcalf) To: rnordier@iafrica.com Cc: bugs@FreeBSD.org Subject: Re: Installation of FreeBSD from DOS partition Message-ID: <9601291831.AA16671@ruddles.stat.uconn.edu>
next in thread | raw e-mail | index | archive | help
Here is the output of ideinfo.exe that you requested. Hope it helps! DRIVE 0 Adapter 0 at base address 1f0h Disk Reports BIOS Reports Default Current # of Cylinders__________:3158 3158 789 # of Heads______________: 16 16 64 # of Sectors/Track______: 63 63 63 Model Number____________: Maxtor 71626 AP Serial Number___________: L904ERKS Controller Rev. #_______: QA3F1918 Double Word Transfer____: Yes Controller type_________: a dual ported multi-sector buffer capable of simultaneous transfers with a read caching capability Buffer size (kB)________: 128 # of ECC bytes__________: 34 # of secs/interrupt_____: 32 Current setting 32 LBA support YES1554.8MB of LBA addressable 1554.3MB in CHS mode DMA support YES IORDY supported YES IORDY can be disabled YES PIO data txfer cycle timing mode: 2 SW DMA txfer cycle timing modes: Active 2 MW DMA txfer cycle timing modes: Active 2 Congratulations, your drive supports ATA-2 Advanced PIO txfer modes supported: Min MW DMA txfer cycle time/word: 120 ns 16.7MB/s Mfg Recommended MW DMA txfer Cycle Time 120 ns 16.7MB/s Min PIO txfer Cycle Time w/o Flow Control 180 ns 11.1MB/s Min PIO txfer Cycle Time w IORDY Flow Control 120 ns 16.7MB/s Adapter 0 at 1f0h Drive 1 not found Last status 1h Adapter 1 at 170h Drive 0 not found Last status 51h Adapter 1 at 170h not found Last status 51h Adapter 2 at f0h not found Last status ffh Adapter 3 at 70h not found Last status ffh
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9601291831.AA16671>