Date: Tue, 11 Feb 2003 12:10:09 -0800 (PST) From: andrew morton <drewish@katherinehouse.com> To: freebsd-bugs@FreeBSD.org Subject: Re: i386/46553: System freezes after awakening from hibernation Message-ID: <200302112010.h1BKA958079774@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR i386/46553; it has been noted by GNATS.
From: andrew morton <drewish@katherinehouse.com>
To: freebsd-gnats-submit@FreeBSD.org
Cc:
Subject: Re: i386/46553: System freezes after awakening from hibernation
Date: Tue, 11 Feb 2003 12:04:05 -0800
Here's my dmesg dump:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE-p1 #0: Tue Feb 4 22:25:45 PST 2003
root@flip.drewish.com:/usr/obj/usr/src/sys/FLIP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0471000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04710a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 597785694 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (597.79-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (255 MB)
avail memory = 256102400 (244 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
Using $PIR table, 5 entries at 0xc00fdf40
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <multimedia, audio> at device 0.1 (no driver attached)
pci0: <old, non-VGA display device> at device 0.2 (no driver attached)
cbb0: <TI1410 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at
device 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1840-0x187f mem
0xfc000000-0xfc01ffff,0xfc020000-0xfc020fff irq 11 at device 3.0 on pci0
fxp0: Ethernet address 00:10:a4:a7:06:43
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <simple comms, UART> at device 3.1 (no driver attached)
pci0: <display, VGA> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1890-0x189f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82443MX USB controller> port 0x18a0-0x18bf irq 11 at
device 7.2 on pci0
usb0: <Intel 82443MX USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 8250 or not responding
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
orm0: <Option ROMs> at iomem
0xe0000-0xeffff,0xd0000-0xd17ff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
wi0: <WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on
pccard0
wi0: 802.11 address: 00:02:2d:22:86:05
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station 8.72.01
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 19077MB <IC25N020ATCS04-0> [38760/16/63] at ata0-master UDMA33
acd0: CDROM <CD-224E> at ata0-slave PIO4
MBREXT Slice 5 on ad0s3:
0000 00 01 c1 ff 07 ef ff ff 3f 00 00 00 e1 8c 06 01 |........?.......|
[0] f:00 typ:7 s(CHS):255/1/193 e(CHS):255/239/255 s:63 l:17206497
0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
Mounting root from ufs:/dev/ad0s2a
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200302112010.h1BKA958079774>