Date: Wed, 8 Aug 2001 13:59:13 -0400 From: "Viren R. Shah" <viren@cigital.com> To: Jonathan Chen <jon@spock.org> Cc: freebsd-bugs@FreeBSD.org Subject: Re: misc/28203: NEWCARD won't recognize my cardbus controllers or my Xircom Realport 10/100+56k card Message-ID: <15217.32241.186089.799930@aop.cigital.com> In-Reply-To: <20010808110415.A37018@enterprise.spock.org> References: <15210.56924.536714.812107@aop.cigital.com> <20010804032632.A25279@enterprise.spock.org> <15216.9560.513790.149857@aop.cigital.com> <20010807142823.A70032@enterprise.spock.org> <15216.22809.812694.468954@aop.cigital.com> <20010808110415.A37018@enterprise.spock.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--PcsUB3SU19
Content-Type: text/plain; charset=us-ascii
Content-Description: message body text
Content-Transfer-Encoding: 7bit
>>>>> "JC" == Jonathan Chen <jon@spock.org> writes:
JC> I think I may have found the problem which causes panic on reinsert -- it
JC> was a stupid error on my part. The following patch fixes this problem. It
JC> also includes some printf's which may help debugging. This patch does not
JC> address the issue where booting up with the card already insertde doesn't
JC> work -- it may be caused by having device pcic and card in your kernel
JC> config. Please try it out and tell me if it works. I'd also appreciate
JC> new dmesg from a boot -v. Thanks.
JC> -Jon
I applied it, and built a new kernel. I booted without the card in the
slot. The cardbus controllers were found. Upon inserting the card, a
lot of messages flew by, neither the NIC part nor the modem part of
the card were detected/attached. So I ejected the card, and
re-inserted it. This time, the dc driver attached to the NIC part of
the card. However, the sio driver wasn't attached to the modem part of
the card. You can see this in the /var/log/messages attachment below,
where the first insertion occurred at 13:14, and at 13:23 I ejected
and re-inserted the card.
So that is a partial success. Do you want me to try adding in the sio
patch that I had used previously, and seeing whether that will work?
or would you rather I wait for a patch from you?
Here's the dmesg:
--PcsUB3SU19
Content-Type: text/plain
Content-Description: dmesg after 3rd patch
Content-Disposition: inline;
filename="dmesg.08082001"
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Wed Aug 8 11:32:59 EDT 2001
root@slithytove.cigital.com:/usr/src/sys/i386/compile/LAPTOP
Calibrating clock(s) ... TSC clock: 848119821 Hz, i8254 clock: 1193151 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 848146544 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (848.15-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268353536 (262064K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00557000 - 0x0ffe3fff, 262721536 bytes (64141 pages)
avail memory = 255889408 (249892K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc06e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc0531000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc05310a8.
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
WARNING: Driver mistake: destroy_dev on 154/0
Math emulator present
Using $PIR table, 10 entries at 0xc00fbc20
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base e4000000, size 26, enabled
found-> vendor=0x8086, dev=0x1130, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x8086, dev=0x1131, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x8086, dev=0x2448, revid=0x02
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x8086, dev=0x244c, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000bfa0, size 4, enabled
found-> vendor=0x8086, dev=0x244a, revid=0x02
bus=0, slot=31, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000dce0, size 5, enabled
found-> vendor=0x8086, dev=0x2442, revid=0x02
bus=0, slot=31, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=11
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xfc000000-0xfdffffff
pcib1: prefetched decode 0xe8000000-0xebffffff
pci1: physical bus=1
map[10]: type 3, range 32, base e8000000, size 26, enabled
map[14]: type 4, range 32, base 0000cc00, size 8, enabled
map[18]: type 1, range 32, base fcffc000, size 14, enabled
found-> vendor=0x1002, dev=0x4d46, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xe000-0xffff
pcib2: memory decode 0xf4000000-0xfbffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: physical bus=2
map[10]: type 4, range 32, base 0000ec00, size 8, enabled
map[14]: type 1, range 32, base f8ffe000, size 13, enabled
found-> vendor=0x125d, dev=0x1998, revid=0x10
bus=2, slot=3, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e880, size 7, enabled
map[14]: type 1, range 32, base f8ffdc00, size 7, enabled
found-> vendor=0x10b7, dev=0x9200, revid=0x78
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x104c, dev=0xac42, revid=0x00
bus=2, slot=15, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x104c, dev=0xac42, revid=0x00
bus=2, slot=15, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f8ffd000, size 11, enabled
map[14]: type 1, range 32, base f8ff8000, size 14, enabled
found-> vendor=0x104c, dev=0x8027, revid=0x00
bus=2, slot=15, func=2
class=0c-00-10, hdrtype=0x00, mfdev=1
intpin=a, irq=11
powerspec 2 supports D0 D2 D3 current D0
pci2: <PCI bus> on pcib2
pci2: <multimedia, audio> at 3.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe880-0xe8ff mem 0xf8ffdc00-0xf8ffdc7f irq 10 at device 8.0 on pci2
pcib2: device xl0 requested decoded I/O range 0xe880-0xe8ff
xl0: Ethernet address: 00:b0:d0:a7:a4:c1
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
pccbb0: <TI4451 PCI-CardBus Bridge> irq 11 at device 15.0 on pci2
pcib2: device pccbb0 requested unsupported memory range 0x0-0xffffffff (decoding 0xf4000000-0xfbffffff, 0xfff00000-0xfffff)
pcib2: device pccbb0 requested decoded memory range 0xf4000000-0xffffffff
pccbb0: PCI Memory allocated: f4000000
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pccbb1: <TI4451 PCI-CardBus Bridge> irq 11 at device 15.1 on pci2
pcib2: device pccbb1 requested unsupported memory range 0x0-0xffffffff (decoding 0xf4000000-0xfbffffff, 0xfff00000-0xfffff)
pcib2: device pccbb1 requested decoded memory range 0xf4000000-0xffffffff
pccbb1: PCI Memory allocated: f4001000
cardbus1: <Cardbus bus (newcard)> on pccbb1
pccard1: <16-bit PCCard bus> on pccbb1
pci2: <serial bus, FireWire> at 15.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xbfa0-0xbfaf at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xbfa0
ata0: mask=03 ostat0=52 ostat2=50
ata0-slave: ATAPI probe d4 fb
ata0-master: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0-slave: ATA probe 01 a5
ata0: devices=03
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xbfa8
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xdce0-0xdcff irq 11 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ata-: ata0 already exists, using ata2 instead
ata-: ata1 already exists, using ata3 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
pnpbios: 14 devices, largest 248 bytes
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x2
PNP0a03: end config
pnpbios: handle 0 device ID PNP0a03 (030ad041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x100000-0xfffffff, size=0xff00000
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
PNP0c01: adding fixed memory32 range 0xfeea0000-0xfeefffff, size=0x60000
PNP0c01: adding io range 0x800-0x87f, size=0x80, align=0x1
PNP0c01: adding io range 0x860-0x87f, size=0x20, align=0x1
PNP0c01: adding io range 0x880-0x8bf, size=0x40, align=0x1
PNP0c01: adding io range 0x8c0-0x8ff, size=0x40, align=0x1
PNP0c01: adding io range 0x600-0x67f, size=0x80, align=0x1
PNP0c01: adding io range 0x680-0x6ff, size=0x80, align=0x1
PNP0c01: adding io range 0x3f0-0x3f1, size=0x2, align=0x1
PNP0c01: adding io range 0x900-0x90f, size=0x10, align=0x1
PNP0c01: adding io range 0x910-0x91f, size=0x10, align=0x1
PNP0c01: end config
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x3f, size=0x20, align=0x1
PNP0000: adding io range 0xa0-0xbf, size=0x20, align=0x1
PNP0000: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0000: end config
pnpbios: handle 3 device ID PNP0000 (0000d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x5f, size=0x20, align=0x1
PNP0100: end config
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0200: adding io range 0x80-0x9f, size=0x20, align=0x1
PNP0200: adding io range 0-0x1f, size=0x20, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
PNP0200: end config
pnpbios: handle 5 device ID PNP0200 (0002d041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: end config
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 7 device ID PNP0f13 (130fd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 8 device ID PNP0800 (0008d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x7f, size=0x10, align=0x1
PNP0b00: end config
pnpbios: handle 9 device ID PNP0b00 (000bd041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: end config
pnpbios: handle 10 device ID PNP0c04 (040cd041)
PNP0e03: adding irq mask 0x20
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1
PNP0e03: end config
pnpbios: handle 11 device ID PNP0e03 (030ed041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: end config
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0401: adding dma mask 0x8
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77b, size=0x4, align=0x8
PNP0401: end config
pnpbios: handle 14 device ID PNP0401 (0104d041)
PNP0700: adding irq mask 0x40
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x2
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x8
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 15 device ID PNP0700 (0007d041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd07ff,0xd0800-0xd0fff,0xd1000-0xd17ff,0xd1800-0xd1fff,0xd2000-0xd27ff,0xd2800-0xd2fff,0xd3000-0xd37ff,0xd3800-0xd3fff on isa0
adv0 failed to probe on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pcm0 failed to probe at irq 10 drq 1 on isa0
pmtimer0 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0xa01 0xa11 0xa01 0xa01
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0xa01 0xa01 0xa01 0xa01
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: Cannot allocate irq
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 c3
9e 1f 00 4f 0d 0e 00 00 06 e0 8f 82 8f 28 1f 8f
9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 0e 00 10 01 03 00 02 a3 5f 4f 50 82 55 81
bf 1f 00 4d 0b 0c 00 00 00 00 83 85 5d 28 1f 63
ba a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 08 00 0f 00 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 c3
9e 1f 00 4f 0d 0e 00 00 06 e0 8f 82 8f 28 1f 8f
9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
sc1: no video adapter found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <PNP0c01> can't assign resources
unknown: <PNP0c01> at port 0x800-0x87f,0x860-0x87f iomem 0-0x9ffff,0x100000-0xfffffff,0xe0000-0xfffff,0xffb80000-0xffbfffff,0xfff80000-0xffffffff,0xfeea0000-0xfeefffff on isa0
adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x80 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
adv1: Invalid baseport of 0x65 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x65-0x74 on isa0
unknown: <PNP0b00> can't assign resources
unknown: <PNP0b00> at port 0x70-0x7f on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x3e0 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <PNP0e03> failed to probe at port 0x3e0-0x3ef irq 5 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: faith0 attached
bpf: lo0 attached
bpf: ppp0 attached
ata0-slave: identify retries exceeded
ad0: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <HITACHI_DK23BA-10/00E2A0D2> ATA-5 disk at ata0-master
ad0: 9590MB (19640880 sectors), 19485 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=0
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0x7, start 63, end = 4192964, size 4192902 : OK
ad0s2: type 0xa5, start 4192965, end = 9301634, size 5108670 : OK
ad0s3: type 0x7, start 9301635, end = 19631429, size 10329795 : OK
cardbus0: detach_card: no card to detach!
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
cardbus1: detach_card: no card to detach!
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
start_init: trying /sbin/init
splash: image decoder found: daemon_saver
Linux ELF exec handler installed
link_elf: symbol vm_mtx undefined
bpf: vmnet1 attached
vmnet1: promiscuous mode enabled
pccbb0: card inserted: event=0x00000000, state=30000820
cardbus0: cardbus_attach_card
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
pccbb0: read_device: 2 0 0 = -1
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: card activation failed
--PcsUB3SU19
Content-Type: text/plain; charset=us-ascii
Content-Description: message body text
Content-Transfer-Encoding: 7bit
Here's the messages log with the messages concerning the insertion
events:
--PcsUB3SU19
Content-Type: text/plain
Content-Description: log of card insertion
Content-Disposition: inline;
filename="messages.080801"
Content-Transfer-Encoding: 7bit
Aug 8 13:14:47 slithytove /boot/kernel/kernel: pccbb0: card inserted: event=0x00000000, state=30000820
Aug 8 13:14:47 slithytove /boot/kernel/kernel: cardbus0: cardbus_attach_card
Aug 8 13:14:47 slithytove /boot/kernel/kernel: pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
Aug 8 13:14:47 slithytove /boot/kernel/kernel: pccbb0: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
Aug 8 13:14:47 slithytove /boot/kernel/kernel: pccbb0: read_device: 2 0 0 = -1
Aug 8 13:14:47 slithytove /boot/kernel/kernel: pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
Aug 8 13:14:47 slithytove /boot/kernel/kernel: pccbb0: card activation failed
Aug 8 13:23:29 slithytove /boot/kernel/kernel: cardbus0: detach_card: no card to detach!
Aug 8 13:23:29 slithytove /boot/kernel/kernel: pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
Aug 8 13:23:34 slithytove /boot/kernel/kernel: pccbb0: card inserted: event=0x00000000, state=30000820
Aug 8 13:23:34 slithytove /boot/kernel/kernel: cardbus0: cardbus_attach_card
Aug 8 13:23:34 slithytove /boot/kernel/kernel: pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
Aug 8 13:23:34 slithytove /boot/kernel/kernel: pccbb0: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
Aug 8 13:23:34 slithytove /boot/kernel/kernel: pccbb0: read_device: 5 0 0 = 201053
Aug 8 13:23:34 slithytove /boot/kernel/kernel: found-> vendor=0x115d, dev=0x0003, revid=0x03
Aug 8 13:23:34 slithytove /boot/kernel/kernel: class=02-00-00, hdrtype=0x00, mfdev=1
Aug 8 13:23:34 slithytove /boot/kernel/kernel: cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
Aug 8 13:23:34 slithytove /boot/kernel/kernel: lattimer=0xa8 (5040 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
Aug 8 13:23:34 slithytove /boot/kernel/kernel: intpin=a, irq=0
Aug 8 13:23:34 slithytove /boot/kernel/kernel: cardbus0: start = 107
Aug 8 13:23:34 slithytove /boot/kernel/kernel: cardbus0: rid = 30
Aug 8 13:23:35 slithytove /boot/kernel/kernel: cardbus0: testval = 30
Aug 8 13:23:35 slithytove /boot/kernel/kernel: cardbus0: Unable to allocate resource to read CIS.
Aug 8 13:23:35 slithytove /boot/kernel/kernel: cardbus0: Resource not specified in CIS: id=10, size=80
Aug 8 13:23:35 slithytove /boot/kernel/kernel: cardbus0: Resource not specified in CIS: id=14, size=800
Aug 8 13:23:35 slithytove /boot/kernel/kernel: cardbus0: Resource not specified in CIS: id=18, size=800
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pcib2: device cardbus0 requested unsupported memory range 0x10000000-0xffffffff (decoding 0xf4000000-0xfbffffff, 0xfff00000-0xfffff)
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pcib2: device cardbus0 requested decoded memory range 0xf4000000-0xffffffff
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pccbb0: ** ALLOC TO cardbus0: 10000000-ffffffff, f4002000-f4002fff
Aug 8 13:23:35 slithytove /boot/kernel/kernel: cardbus0: Non-prefetchable memory at f4002000-f4002fff
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pcib2: device cardbus0 requested decoded memory range 0xf4002000-0xf4002fff
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pccbb0: ** ALLOC TO cardbus0: f4002000-f4002fff, f4002000-f40027ff
Aug 8 13:23:35 slithytove /boot/kernel/kernel: cardbus0: Non-prefetchable memory rid=18 at f4002000-f40027ff (800)
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pcib2: device cardbus0 requested decoded memory range 0xf4002000-0xf4002fff
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pccbb0: ** ALLOC TO cardbus0: f4002000-f4002fff, f4002800-f4002fff
Aug 8 13:23:35 slithytove /boot/kernel/kernel: cardbus0: Non-prefetchable memory rid=14 at f4002800-f4002fff (800)
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pcib2: device cardbus0 requested unsupported I/O range 0x1000-0xffffffff (decoding 0xe000-0xffff)
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pcib2: device cardbus0 requested decoded I/O range 0xe000-0xffffffff
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pccbb0: ** ALLOC TO cardbus0: 1000-ffffffff, e000-e07f
Aug 8 13:23:35 slithytove /boot/kernel/kernel: cardbus0: IO port at e000-e07f
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pcib2: device cardbus0 requested decoded I/O range 0xe000-0xe07f
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pccbb0: ** ALLOC TO cardbus0: e000-e07f, e000-e07f
Aug 8 13:23:35 slithytove /boot/kernel/kernel: cardbus0: IO port rid=10 at e000-e07f
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pccbb0: ** ALLOC TO cardbus0: b-b, b-b
Aug 8 13:23:35 slithytove /boot/kernel/kernel: dc0: <Xircom X3201 10/100BaseTX> port 0xe000-0xe07f mem 0xf4002000-0xf40027ff,0xf4002800-0xf4002fff irq 11 at device 0.0 on cardbus0
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pcib2: device dc0 requested decoded I/O range 0xe000-0xe07f
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pccbb0: ** ALLOC TO dc0: e000-e07f, e000-e07f
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pccbb0: ** ALLOC TO dc0: b-b, b-b
Aug 8 13:23:35 slithytove /boot/kernel/kernel: dc0: Ethernet address: 1a:e7:67:7d:29:f7
Aug 8 13:23:35 slithytove /boot/kernel/kernel: miibus1: <MII bus> on dc0
Aug 8 13:23:35 slithytove /boot/kernel/kernel: tdkphy0: <TDK 78Q2120 media interface> on miibus1
Aug 8 13:23:35 slithytove /boot/kernel/kernel: tdkphy0: OUI 0x00c039, model 0x0014, rev. 11
Aug 8 13:23:35 slithytove /boot/kernel/kernel: tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Aug 8 13:23:35 slithytove /boot/kernel/kernel: bpf: dc0 attached
Aug 8 13:23:35 slithytove /boot/kernel/kernel: pccbb0: read_device: 5 0 1 = 16978269
Aug 8 13:23:36 slithytove /boot/kernel/kernel: found-> vendor=0x115d, dev=0x0103, revid=0x03
Aug 8 13:23:36 slithytove /boot/kernel/kernel: class=07-00-02, hdrtype=0x00, mfdev=1
Aug 8 13:23:36 slithytove /boot/kernel/kernel: cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
Aug 8 13:23:36 slithytove /boot/kernel/kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
Aug 8 13:23:36 slithytove /boot/kernel/kernel: intpin=a, irq=0
Aug 8 13:23:36 slithytove /boot/kernel/kernel: cardbus0: start = 207
Aug 8 13:23:36 slithytove /boot/kernel/kernel: cardbus0: rid = 30
Aug 8 13:23:36 slithytove /boot/kernel/kernel: cardbus0: testval = 30
Aug 8 13:23:36 slithytove /boot/kernel/kernel: cardbus0: Unable to allocate resource to read CIS.
Aug 8 13:23:36 slithytove /boot/kernel/kernel: cardbus0: Resource not specified in CIS: id=10, size=10
Aug 8 13:23:36 slithytove /boot/kernel/kernel: cardbus0: Resource not specified in CIS: id=14, size=800
Aug 8 13:23:36 slithytove /boot/kernel/kernel: cardbus0: Resource not specified in CIS: id=18, size=800
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pcib2: device cardbus0 requested unsupported memory range 0x10000000-0xffffffff (decoding 0xf4000000-0xfbffffff, 0xfff00000-0xfffff)
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pcib2: device cardbus0 requested decoded memory range 0xf4000000-0xffffffff
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pccbb0: ** ALLOC TO cardbus0: 10000000-ffffffff, f4003000-f4003fff
Aug 8 13:23:36 slithytove /boot/kernel/kernel: cardbus0: Non-prefetchable memory at f4003000-f4003fff
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pcib2: device cardbus0 requested decoded memory range 0xf4003000-0xf4003fff
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pccbb0: ** ALLOC TO cardbus0: f4003000-f4003fff, f4003000-f40037ff
Aug 8 13:23:36 slithytove /boot/kernel/kernel: cardbus0: Non-prefetchable memory rid=18 at f4003000-f40037ff (800)
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pcib2: device cardbus0 requested decoded memory range 0xf4003000-0xf4003fff
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pccbb0: ** ALLOC TO cardbus0: f4003000-f4003fff, f4003800-f4003fff
Aug 8 13:23:36 slithytove /boot/kernel/kernel: cardbus0: Non-prefetchable memory rid=14 at f4003800-f4003fff (800)
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pcib2: device cardbus0 requested unsupported I/O range 0x1000-0xffffffff (decoding 0xe000-0xffff)
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pcib2: device cardbus0 requested decoded I/O range 0xe000-0xffffffff
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pccbb0: ** ALLOC TO cardbus0: 1000-ffffffff, e080-e08f
Aug 8 13:23:36 slithytove /boot/kernel/kernel: cardbus0: IO port at e080-e08f
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pcib2: device cardbus0 requested decoded I/O range 0xe080-0xe08f
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pccbb0: ** ALLOC TO cardbus0: e080-e08f, e080-e08f
Aug 8 13:23:36 slithytove /boot/kernel/kernel: cardbus0: IO port rid=10 at e080-e08f
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pccbb0: ** ALLOC TO cardbus0: b-b, b-b
Aug 8 13:23:36 slithytove /boot/kernel/kernel: cardbus0: <unknown card> (vendor=0x115d, dev=0x0103) at 0.1 irq 11
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pccbb0: read_device: 5 0 2 = -1
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pccbb0: read_device: 5 0 3 = -1
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pccbb0: read_device: 5 0 4 = -1
Aug 8 13:23:36 slithytove /boot/kernel/kernel: pccbb0: read_device: 5 0 5 = -1
Aug 8 13:23:37 slithytove /boot/kernel/kernel: pccbb0: read_device: 5 0 6 = -1
Aug 8 13:23:37 slithytove /boot/kernel/kernel: pccbb0: read_device: 5 0 7 = -1
--PcsUB3SU19
Content-Type: text/plain; charset=us-ascii
Content-Description: message body and .signature
Content-Transfer-Encoding: 7bit
Thanks
Viren
--
"My other car is a cdr."
--PcsUB3SU19--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15217.32241.186089.799930>