Date: Tue, 6 Jan 2009 20:01:03 +0300 From: Stanislav Sedov <stas@FreeBSD.org> To: Hans Petter Selasky <hselasky@c2i.net> Cc: Stanislav Sedov <stas@freebsd.org>, svn-src-head@freebsd.org, svn-src-all@freebsd.org, Alfred Perlstein <alfred@freebsd.org>, src-committers@freebsd.org Subject: Re: svn commit: r186730 - in head: lib/libusb20 sys/dev/usb2/controller sys/dev/usb2/core sys/dev/usb2/ethernet sys/dev/usb2/image sys/dev/usb2/include sys/dev/usb2/serial sys/dev/usb2/sound sys/dev/us... Message-ID: <20090106200103.26f2b5a9.stas@FreeBSD.org> In-Reply-To: <200901061751.27394.hselasky@c2i.net> References: <200901040012.n040C2gH040928@svn.freebsd.org> <200901061613.33687.hselasky@c2i.net> <20090106193844.c727cfb7.stas@FreeBSD.org> <200901061751.27394.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tue, 6 Jan 2009 17:51:26 +0100 Hans Petter Selasky <hselasky@c2i.net> mentioned: > On Tuesday 06 January 2009, Stanislav Sedov wrote: > > On Tue, 6 Jan 2009 16:13:32 +0100 > > > > Hans Petter Selasky <hselasky@c2i.net> mentioned: > > > Try: > > > > > > usbconfig -u 0 -a 2 set_config 1 > > > > This helps. Now ubsa attaches to the device. But I can't communicate > > with it (no echo even). I see the following messages in the log: > > ubsa_cfg_request:395: device request failed, err=USB_ERR_STALLED (ignored) > > ubsa_cfg_request:395: device request failed, err=USB_ERR_STALLED (ignored) > > ubsa_cfg_request:395: device request failed, err=USB_ERR_STALLED (ignored) > > > > > You can for example add a quirk for this, see "usbconfig -h | grep -i > > > quirk". I know this is not so easy, but if you can make a general rule > > > for when selecting another configuration, I will add it. > > > > Why not let the driver to set the config? > > Because: > > 1) it clashes with USB device side mode, where the config index is received > from Host > > 2) Different device drivers might want different configurations. > > 3) The driver for the active configuration might not be loaded. > I see. > This is interesting: > > bNumConfigurations = 0x0001 > > The device says it only has one configuration! So setting index 1 should not > be allowed. > > Could you try to change the check in the ubsa2.c probe routine to check for > config index 0 instead? > It attaches but doesn't work with the same error message as listed above. > > iInterface = 0x0003 <retrieving string failed> > > When you cannot retrive the strings, I think your device is gone! (Crashed) So at this point the device is effectively detached? Do you have ideas why that might happen. I don't also understand how it may work with config index 1 on old stack if the maximum number of configurations is 1 too... Looks weird. - -- Stanislav Sedov ST4096-RIPE -----BEGIN PGP SIGNATURE----- iEYEARECAAYFAkljjk8ACgkQK/VZk+smlYHhagCdFvM/p9fLTQL5A3manV/wq72h 2hQAniOi0FidMBaVHkcFZybsT832ivtz =HPtC -----END PGP SIGNATURE----- !DSPAM:49638dc0967001363314401!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090106200103.26f2b5a9.stas>