Date: Wed, 09 Jun 2004 14:56:12 -0400 From: Frederick Lefebvre <frederick.lefebvre@hexago.com> To: freebsd-hardware@freebsd.org Subject: DVD burner - LG GSA-4082B Message-ID: <89040000.1086807372@hades.hexago.com>
next in thread | raw e-mail | index | archive | help
Did anybody had success with the above mentioned DVD burner on FreeBSD 5.2.1?. I tried to burn DVD-R and DVD+R using cdrecord-prodvd but I keep having scsi related errors. It worked fine with cd-r. Here is the error I got when I tried to burn on a dvd-r: #/usr/local/bin/cdrecord-dvd dev=0,1,0 -v FILE.iso Cdrecord-ProDVD-Clone 2.01a24 (i386-unknown-freebsd5.2) Copyright (C) 1995-2004 Jrg Schilling Unlocked features: ProDVD Clone Limited features: This copy of cdrecord is licensed for: private/research/educational_non-commercial_use TOC Type: 1 = CD-ROM scsidev: '0,1,0' scsibus: 0 target: 1 lun: 0 Using libscg version 'schily-0.8'. SCSI buffer size: 64512 atapi: 0 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GSA-4082B' Revision : 'A201' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: DVD-R sequential recording Profile: DVD-RAM Profile: DVD-R sequential recording (current) Profile: DVD-RW sequential overwrite Profile: DVD-RW restricted overwrite Profile: DVD+RW Profile: DVD+R Profile: DVD-ROM Profile: CD-R Profile: CD-RW Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd). Driver flags : DVD MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1245184 = 1216 KB FIFO size : 4194304 = 4096 KB Track 01: data 3276 MB Total size: 3276 MB = 1677748 sectors Current Secsize: 2048 Total power on hours: 0 /usr/local/bin/cdrecord-dvd: Input/output error. log sense: scsi sendcmd: retryable error CDB: 4D 00 70 00 00 00 01 00 04 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 100s Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 620748 Starting to write CD/DVD at speed 4 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Turning BURN-Free off Starting new track at sector: 0 Track 01: 0 of 3276 MB written./usr/local/bin/cdrecord-dvd: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 5.701s timeout 100s write track data: error after 0 bytes /usr/local/bin/cdrecord-dvd: A write error occured. /usr/local/bin/cdrecord-dvd: Please properly read the error message above. Writing time: 10.764s Average write speed 231.0x. Fixating... Fixating time: 15.495s /usr/local/bin/cdrecord-dvd: fifo had 64 puts and 1 gets. /usr/local/bin/cdrecord-dvd: fifo was 0 times empty and 0 times full, min fill was 100%. In the case above, nothing was writen to the disk. The same command on a dvd+r burned all the data but failed on the 'fixate'. Any input will be appreciated! Frederick Lefebvre ------------------------------------------------ http://www.freenet6.net : Free IPv6 Connectivity ------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?89040000.1086807372>