Date: Wed, 12 May 1999 16:51:41 +0200 From: Gianmarco Giovannelli <gmarco@giovannelli.it> To: current@freebsd.org Subject: Sometimes again SCSI don't finish to boot Message-ID: <4.1.19990512164444.01268a20@194.184.65.4>
index | next in thread | raw e-mail
In 4.0-current sometimes the box will froze again after the :
"Waiting 3 seconds for SCSI devices to settle"
then nothing happens.
It was a thing happened also in early 1999, before the branch in
4.0-current and 3.1 stable, if I remember well.
Any others experience such behaviour ?
Here is again (part of) my infos:
FreeBSD 4.0-CURRENT #0: Wed May 12 13:03:16 CEST 1999
root@gmarco.eclipse.org:/usr/src/sys/compile/GMARCO
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 400911064 Hz
CPU: Pentium II/Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping=1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
avail memory = 127868928 (124872K bytes)
Preloaded elf kernel "kernel" at 0xc02ae000.
Pentium Pro MTRR support enabled, default memory type is uncacheable
Probing for PnP devices:
pcib0: <PCI host bus adapter> on motherboard
pci0: <PCI bus> on pcib0
chip0: <Intel 82443BX host to PCI bridge> at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=7191)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <VGA-compatible display device> irq 11 at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
chip1: <Intel PIIX4 IDE controller> at device 4.1 on pci0
chip2: <Intel 82371AB Power management controller> at device 4.3 on pci0
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> irq 14 at device 6.0 on pci0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
[...]
Waiting 3 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <TANDBERG TDC 3500 =01:> Removable Sequential Access SCSI-2 device
sa0: 3.300MB/s transfers
changing root device to da0s1a
da2 at ahc0 bus 0 target 2 lun 0
da2: <IOMEGA ZIP 100 E.08> Removable Direct Access SCSI-2 device
da2: 3.300MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing
Enabled
da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing
Enabled
da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
Kernel file :
######## Identification #######
machine "i386"
cpu "I686_CPU"
ident GMARCO
maxusers 32
######### Misc Options ########
options INET
options FFS
options NFS
options PROCFS
options FFS_ROOT
options "COMPAT_43"
options SCSI_DELAY=3000
options UCONSOLE
options USERCONFIG
options VISUAL_USERCONFIG
options SOFTUPDATES
options SYSVSHM
options SYSVSEM
options SYSVMSG
######### Controllers ##########
controller isa0
controller pci0
controller pnp0
######### Floppy Disk ###########
controller fdc0 at isa? port IO_FD1 irq 6 drq 2
disk fd0 at fdc0 drive 0
######### Scsi subsystem ########
controller ahc0
controller scbus0
device da0
device sa0
device cd0
########## Keyboard and screen ###
controller atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa? port ? conflicts
device sc0 at isa?
######### Fpu ####################
device npx0 at nexus? port IO_NPX irq 13
########## Serials Devs #########
device sio0 at isa? port IO_COM1 irq 4
device sio1 at isa? port IO_COM2 irq 3
########### Par bus ###############
device ppc0 at isa? port? flags 0x40 irq 7
controller ppbus0
device lpt0 at ppbus?
########### Ether #################
device de0
########### Luigi's drivers #######
device pcm0 at isa? port 0x220 irq ? drq ? flags 0x15
########## Misc Device ##############
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip
####################################
Sorry for the double posting of kernel and dmesg file (I also posted in my
previous message about crashes).
Best Regards,
Gianmarco Giovannelli , "Unix expert since yesterday"
http://www.giovannelli.it/~gmarco
http://www2.masternet.it
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.1.19990512164444.01268a20>