Date: Tue, 31 Jan 2006 10:42:28 -0500 From: Mike Tancsa <mike@sentex.net> To: Danny Braniss <danny@cs.huji.ac.il>, freebsd-stable@freebsd.org Subject: Re: bge stopped working with latest 6.0-stable Message-ID: <6.2.3.4.0.20060131103658.07a6c110@64.7.153.2> In-Reply-To: <E1F3xRR-000KNm-09@cs1.cs.huji.ac.il> References: <E1F3xRR-000KNm-09@cs1.cs.huji.ac.il>
next in thread | previous in thread | raw e-mail | index | archive | help
At 10:29 AM 31/01/2006, Danny Braniss wrote: >with the latest cvsup - this morning - the bge stopped working. There was other breakage at the same time that got commited. Can you add Rev 1.292.2.7 of pci.c ? http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/pci/pci.c I am using the lastest in the tree and it works for me on my PCI-e versions of the NICs brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:10:18:14:15:12 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci4: <ACPI PCI bus> on pcib4 bge1: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 0xd3000000-0xd300ffff irq 19 at device 0.0 on pci4 miibus2: <MII bus> on bge1 brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus2 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:10:18:14:38:d2 bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> inet 172.29.13.4 netmask 0xffffff00 broadcast 172.29.13.255 ether 00:10:18:14:15:12 media: Ethernet autoselect (1000baseTX <full-duplex>) status: active >... >bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem >0xefcf0000-0xefcfffff irq 11 at device 0.0 on pci2 >miibus0: <MII bus> on bge0 >brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0 >brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, >1000baseTX-FDX, auto >bge0: Ethernet address: 00:12:3f:96:c0:ad >... >Trying to mount root from nfs: >NFS ROOT: 132.65.16.112:/d/8 >bge0: link state changed to DOWN >bge0: link state changed to UP > >and now all is stuck. >unplugging/plugging seems to be recognized. > >btw, the last working version that i have is: >__FBSDID("$FreeBSD: src/sys/dev/bge/if_bge.c,v 1.91.2.8 2006/01/13 19:21:43 >glebius Exp $") > >thanks, > > danny > > >_______________________________________________ >freebsd-stable@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-stable >To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.3.4.0.20060131103658.07a6c110>