Date: Wed, 5 Apr 2000 15:28:32 +0200 (SAT) From: John Hay <jhay@mikom.csir.co.za> To: current@freebsd.org Subject: burncd problem Message-ID: <200004051328.PAA99513@zibbi.mikom.csir.co.za>
next in thread | raw e-mail | index | archive | help
Hi,
I have installed 4.0-STABLE on our machine with the CD burner and when
I tried to burn a CD, the session went as follows:
=======
tien# burncd -s 4 -f /dev/acd0c data 4.0-install.iso fixate
next writeable LBA 0
writing from file 4.0-install.iso size 641174 KB
written this track 641174 KB (100%) total 641174 KB
fixating CD, please wait..
burncd: ioctl(CDRIOCCLOSEDISK): Input/output error
tien#
=======
In this time the kernel spit out the following messages:
=======
Apr 5 09:49:39 tien /kernel: acd0: READ_TOC - ILLEGAL REQUEST asc=24 ascq=00 error=04
Apr 5 10:07:25 tien /kernel: acd0: CLOSE_TRACK/SESSION - ILLEGAL REQUEST asc=64 ascq=00 error=04
Apr 5 10:07:25 tien /kernel: acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=64 ascq=00 error=04
======
The CD writer is an HP 8100 and I have used it before without problems
with a much older version of 4-CURRENT, that is before the ata driver.
Does anybody else have problems with the HP 8100 series? I have included
dmesg.boot at the end.
John
--
John Hay -- John.Hay@mikom.csir.co.za
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-20000403-STABLE #0: Tue Apr 4 02:17:15 GMT 2000
root@dolphin.mikom.csir.co.za:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping = 1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134205440 (131060K bytes)
avail memory = 126693376 (123724K bytes)
Preloaded elf kernel "kernel" at 0xc03c3000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xc800-0xc80f at device 4.1 on pci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2 irq 5
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
ncr0: <ncr 53c810 fast10 scsi> port 0xc000-0xc0ff mem 0xe0800000-0xe08000ff irq 12 at device 10.0 on pci0
ncr0: driver is using old-style compatability shims
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xb800-0xb81f mem 0xe0000000-0xe00fffff,0xe2000000-0xe2000fff irq 10 at device 11.0 on pci0
fxp0: Ethernet address 00:a0:c9:e8:0f:1f
fxp0: supplying EUI64: 00:a0:c9:ff:fe:e8:0f:1f
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xb400-0xb43f irq 11 at device 12.0 on pci0
xl0: Ethernet address: 00:60:08:9f:82:e4
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
acd0: CD-RW <Hewlett-Packard CD-Writer Plus 8100> at ata1-master using PIO3
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ncr0 bus 0 target 0 lun 0
da0: <MICROP 1926-15MW1002002 HW0A> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da0: 2058MB (4216172 512 byte sectors: 255H 63S/T 262C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200004051328.PAA99513>