Date: Tue, 25 Dec 2007 13:26:44 +0200 From: Andriy Gapon <avg@icyb.net.ua> To: remko@elvandar.org Cc: freebsd-usb@freebsd.org Subject: Re: 7.0-BETA3 kernel panic when unplugging USB stick Message-ID: <4770E8F4.1020705@icyb.net.ua> In-Reply-To: <20170.194.74.82.3.1196153704.squirrel@galain.elvandar.org> References: <20170.194.74.82.3.1196153704.squirrel@galain.elvandar.org>
next in thread | previous in thread | raw e-mail | index | archive | help
on 27/11/2007 10:55 Remko Lodder said the following:
> [snip]
>
>> Just in case:
>> the reader - Trust CR-1420P
>> the card - SanDisk SDSDM-2048
>
> The above information is not really informative for me , can you send a
> dmesg -v and pciconf -vl so that we might trick it into getting supported
> by the current drivers? :)
>From usbdevs -vd:
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
nVidia(0x0000), rev 1.00
uhub1
...
port 4 addr 2: high speed, power 100 mA, config 1, product
0x6362(0x6362), vendor 0x058f(0x058f), rev 1.26
umass0
>From dmesg:
umass0: Generic Mass Storage Device, rev 2.00/1.26, addr 2
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
(da0:umass-sim0:0:0:0): got CAM status 0x4
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
(da0:umass-sim0:0:0:0): lost device
>From pciconf- lv:
ehci0@pci0:11:1: class=0x0c0320 card=0x81c01043 chip=0x026e10de
rev=0xa3 hdr=0x00
vendor = 'NVIDIA Corporation'
class = serial bus
subclass = USB
>From camcontrol devlist -v:
scbus6 on umass-sim0 bus 0:
<Generic USB SD Reader 1.00> at scbus6 target 0 lun 0 (da0,pass2)
< > at scbus6 target 0 lun 2 (probe0)
< > at scbus6 target -1 lun -1 ()
--
Andriy Gapon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4770E8F4.1020705>