Date: Fri, 31 Aug 2012 08:22:22 GMT From: Bartek Krawczyk <bbartlomiej@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: usb/171197: ADATA Classic CH11 USB HDD doesn't work in FreeBSD 9.1-RC1 Message-ID: <201208310822.q7V8MMqC051998@red.freebsd.org> Resent-Message-ID: <201208310830.q7V8U81J058808@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 171197 >Category: usb >Synopsis: ADATA Classic CH11 USB HDD doesn't work in FreeBSD 9.1-RC1 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Aug 31 08:30:08 UTC 2012 >Closed-Date: >Last-Modified: >Originator: Bartek Krawczyk >Release: 9.1-RC1 >Organization: >Environment: FreeBSD xbmc 9.1-RC1 FreeBSD 9.1-RC1 #0: Tue Aug 14 04:25:06 UTC 2012 root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 >Description: Hi, I recently bought a 1TB ADATA Classic CH11 USB HDD and it doesn't seem to be recognized by FreeBSD 9.1-RC1 (it works in Windows and Linux though). I can provide more debugging information if you tell me how to do it. This is what I get in messages: Aug 31 10:04:12 xbmc kernel: usb_alloc_device: set address 2 failed (USB_ERR_STALLED, ignored) Aug 31 10:04:12 xbmc kernel: usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_STALLED Aug 31 10:04:12 xbmc kernel: usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, ignored) Aug 31 10:04:12 xbmc kernel: usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_STALLED Aug 31 10:04:13 xbmc kernel: usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, ignored) Aug 31 10:04:13 xbmc kernel: usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_STALLED Aug 31 10:04:13 xbmc kernel: ugen1.2: <Unknown> at usbus1 (disconnected) Aug 31 10:04:13 xbmc kernel: uhub_reattach_port: could not allocate new device And this is from usbconfig: ugen4.2: <product 0x3323 vendor 0x13d3> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON If it helps I'm posting also logs from Linux box: Aug 31 10:13:08 asus kernel: [184055.333341] usb 2-1.2: new high-speed USB device number 10 using ehci_hcd Aug 31 10:13:08 asus kernel: [184055.538945] usb 2-1.2: New USB device found, idVendor=125f, idProduct=a11a Aug 31 10:13:08 asus kernel: [184055.538952] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 Aug 31 10:13:08 asus kernel: [184055.538957] usb 2-1.2: Product: CH11 Aug 31 10:13:08 asus kernel: [184055.538960] usb 2-1.2: Manufacturer: ADATA Aug 31 10:13:08 asus kernel: [184055.538963] usb 2-1.2: SerialNumber: C11A023201207180022E Aug 31 10:13:08 asus kernel: [184055.539941] scsi30 : usb-storage 2-1.2:1.0 Aug 31 10:13:11 asus kernel: [184058.568744] scsi 30:0:0:0: Direct-Access ADATA CH11 2AR1 PQ: 0 ANSI: 5 Aug 31 10:13:11 asus kernel: [184058.569484] sd 30:0:0:0: Attached scsi generic sg3 type 0 Aug 31 10:13:11 asus kernel: [184058.570506] sd 30:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Aug 31 10:13:11 asus kernel: [184058.571208] sd 30:0:0:0: [sdd] Write Protect is off Aug 31 10:13:11 asus kernel: [184058.571211] sd 30:0:0:0: [sdd] Mode Sense: 23 00 00 00 Aug 31 10:13:11 asus kernel: [184058.571973] sd 30:0:0:0: [sdd] No Caching mode page present Aug 31 10:13:11 asus kernel: [184058.571977] sd 30:0:0:0: [sdd] Assuming drive cache: write through Aug 31 10:13:11 asus kernel: [184058.574196] sd 30:0:0:0: [sdd] No Caching mode page present Aug 31 10:13:11 asus kernel: [184058.574199] sd 30:0:0:0: [sdd] Assuming drive cache: write through Aug 31 10:13:11 asus kernel: [184058.595845] sdd: sdd1 Aug 31 10:13:11 asus kernel: [184058.598645] sd 30:0:0:0: [sdd] No Caching mode page present Aug 31 10:13:11 asus kernel: [184058.598651] sd 30:0:0:0: [sdd] Assuming drive cache: write through Aug 31 10:13:11 asus kernel: [184058.598655] sd 30:0:0:0: [sdd] Attached SCSI disk Aug 31 10:13:11 asus kernel: [184058.664878] xhci_hcd 0000:07:00.0: BAR 0: set to [mem 0xd4c00000-0xd4c0ffff] (PCI address [0xd4c00000-0xd4c0ffff]) Aug 31 10:13:11 asus kernel: [184058.664976] xhci_hcd 0000:07:00.0: PME# disabled Aug 31 10:13:11 asus kernel: [184058.664995] xhci_hcd 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Aug 31 10:13:11 asus kernel: [184058.665005] xhci_hcd 0000:07:00.0: setting latency timer to 64 Aug 31 10:13:11 asus kernel: [184058.665025] usb usb3: root hub lost power or was reset Aug 31 10:13:11 asus kernel: [184058.665028] usb usb4: root hub lost power or was reset Aug 31 10:13:18 asus kernel: [184065.256685] xhci_hcd 0000:07:00.0: PCI INT A disabled Aug 31 10:13:18 asus kernel: [184065.256759] xhci_hcd 0000:07:00.0: PME# enabled and an output from lsusb: Bus 002 Device 010: ID 125f:a11a A-DATA Technology Co., Ltd >How-To-Repeat: Connect an ADATA Classic CH11 HDD to a FreeBSD 9.1-RC1 system. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201208310822.q7V8MMqC051998>