Date: Mon, 25 Jun 2018 08:57:04 +0000 (UTC) From: Andriy Gapon <avg@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-10@freebsd.org Subject: svn commit: r335627 - stable/10/sys/dev/usb/serial Message-ID: <201806250857.w5P8v4fl046460@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: avg Date: Mon Jun 25 08:57:03 2018 New Revision: 335627 URL: https://svnweb.freebsd.org/changeset/base/335627 Log: MFC r334002: uchcom: extend hardware support to version 0x30 Modified: stable/10/sys/dev/usb/serial/uchcom.c Directory Properties: stable/10/ (props changed) Modified: stable/10/sys/dev/usb/serial/uchcom.c ============================================================================== --- stable/10/sys/dev/usb/serial/uchcom.c Mon Jun 25 08:56:30 2018 (r335626) +++ stable/10/sys/dev/usb/serial/uchcom.c Mon Jun 25 08:57:03 2018 (r335627) @@ -124,6 +124,7 @@ SYSCTL_INT(_hw_usb_uchcom, OID_AUTO, debug, CTLFLAG_RW #define UCHCOM_REG_LCR2 0x25 #define UCHCOM_VER_20 0x20 +#define UCHCOM_VER_30 0x30 #define UCHCOM_BASE_UNKNOWN 0 #define UCHCOM_BPS_MOD_BASE 20000000 @@ -703,11 +704,26 @@ uchcom_cfg_param(struct ucom_softc *ucom, struct termi { struct uchcom_softc *sc = ucom->sc_parent; - uchcom_get_version(sc, 0); + uchcom_get_version(sc, NULL); uchcom_ctrl_write(sc, UCHCOM_REQ_RESET, 0, 0); uchcom_set_baudrate(sc, t->c_ospeed); - uchcom_read_reg(sc, 0x18, 0, 0x25, 0); - uchcom_write_reg(sc, 0x18, 0x50, 0x25, 0x00); + if (sc->sc_version < UCHCOM_VER_30) { + uchcom_read_reg(sc, UCHCOM_REG_LCR1, NULL, + UCHCOM_REG_LCR2, NULL); + uchcom_write_reg(sc, UCHCOM_REG_LCR1, 0x50, + UCHCOM_REG_LCR2, 0x00); + } else { + /* + * Set up line control: + * - enable transmit and receive + * - set 8n1 mode + * To do: support other sizes, parity, stop bits. + */ + uchcom_write_reg(sc, + UCHCOM_REG_LCR1, + UCHCOM_LCR1_RX | UCHCOM_LCR1_TX | UCHCOM_LCR1_CS8, + UCHCOM_REG_LCR2, 0x00); + } uchcom_update_status(sc); uchcom_ctrl_write(sc, UCHCOM_REQ_RESET, 0x501f, 0xd90a); uchcom_set_baudrate(sc, t->c_ospeed);
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201806250857.w5P8v4fl046460>